Threshold sensitivity of anti-Stokes frequency converter

Expressions describing the threshold sensitivity of a quantum converter of IR radiation into visible light are obtained for two schemes of energy levels in the active atoms. Based on these expressions, practical criteria for the creation of such devices are formulated.     

The stress-whitened damage zone of PVC blends

The stress-whitened damage zone that formed ahead of a semicircular notch during slow tensile loading has been measured from optical micrographs of translucent blends of poly(vinyl chloride) (PVC) with experimental chlorinated polyethylene (CPE) resins. When the zone was small, the plane strain condition applied and from the elastic stress distribution a constant mean stress condition was found at the boundary of the crescent-shaped zone. The critical mean stress did not depend on the chlorine content or the chlorine distribution of the experimental CPE resin used in the blend. While the critical mean stress decreased as the amount of CPE in the blend was increased, the critical volume strain, calculated from the bulk modulus, was independent of composition and was thought to be the controlling parameter for stress-whitening. When the zone was larger, the shape was qualitatively described by concepts of stress redistribution in the presence of a plastic zone ahead of the notch. Macroscopic flow and necking were only detected near the maximum in the stress-displacement curve.     

Catalysis of linoleate oxidation by soluble chicken muscle proteins

A soluble fraction of a chickenMusculus gastrocnemius muscle was used to characterize the catalyst of linoleate oxidation. Separation of the chicken muscle extract into low (free metal) and high (protein) molecular weight fractions revealed that the molecular weight of the major catalyst of linoleate oxidation in chicken muscle extract was greater than 700 daltons. Catalysis of linoleate oxidation by the protein fraction exhibited a pH optimum of 5.9. Subjecting the protein fraction to heat treatments at increasing temperatures (30–90 C) decreased the catalysis of linoleate oxidation. Addition of two mM EDTA had no effect on the catalysis of linoleate oxidation. Cyanide (2 mM), glutathione (1 mM) and cysteine (1 mM) decreased the oxidation of linoleate by the protein fraction 21.0%, 22.9% and 29.0% respectively. Characterization of the oxidative catalyst in chicken muscle extract indicated that free metals and hemoproteins contribute to overall catalysis of linoleate oxidation but are not the sole catalysts. Heat inactivation of the oxidative catalyst and the observed pH optimum suggests that the unidentified catalyst is proteinacious and may be an enzyme.     

Cognitive impenetrability of memory for orientation.

This research produced evidence that an aspect of visual long-term memory—memory for lateral orientation of pictures—is constrained by a viewer-centered or egocentric reference frame. Subjects in Experiment 1 verbally encoded and then verbally recalled the locations of objects within scenic pictures. Recall of locations in terms of left-right directions (using a viewer-centered frame) exceeded recall of locations in terms of relative proximities to features of the room (using an environmental frame), even if the relative proximities had been verbalized at input. Subjects in Experiment 2 viewed half of a list of pictures directly and the remainder, reflected in a mirror. They then took a test in which they classified old pictures—all viewed directly— as "same-orientation" or "reversed." Performance was much better with a viewer-centered definition of same orientation (Does the picture appear the same way around?) than with an environmental definition (Is the picture the same way around on the screen?), even with forewarning of an environmental orientation test. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Execution cache-based microarchitecture for power-efficient superscalar processors

This paper investigates a possible solution to the problem of power consumption in superscalar, out-of-order processors by proposing a new microarchitecture, specifically designed to reduce increasing power requirements of high-end processors. More precisely, we show that by modifying the well-established superscalar processor architecture, significant savings can be achieved in terms of power consumption. Our approach aims at limiting the growing amount of power used in a typical processor for dynamic optimizations (including out-of-order scheduling and register renaming). Our proposed approach achieves significant power savings by reusing as much as possible from the work done by the front-end of a typical superscalar, out-of-order pipeline, via the use of a special cache nested deeply into the processor structure. By reusing instructions that are already decoded, reordered, and have their registers already renamed, the front end of the pipeline can be turned off for large periods of time with significant savings in the overall power consumption. Experimental results show up to 35% (30% on average) savings in average energy per committed instruction, and 35% (20% on average) savings in energy-delay product, with about 9% average performance loss, over a large spectrum of SPEC95 and SPEC2000 benchmarks.     

Associative properties of perfluorooctyl end‐functionalized polystyrene–poly(ethylene oxide) diblock copolymers

The synthesis of 2,2,3,3‐tetrahydro‐perfluoroundecanoyl end‐functionalized polystyrene–poly(ethylene oxide) block (PS‐block‐PEO‐R_F) copolymers and their matching PS‐block‐PEO diblock copolymers was carried out by sequential anionic polymerization. Viscometry and ¹⁹F NMR studies show that the PS‐block‐PEO copolymers, in contrast to their matching PS‐block‐PEO‐R_F copolymers, exhibit a micellar rather than the associative behavior seen for the latter. However, the presence of an excess of fluorinated acid, used for end‐functionalization, produces a reduction of the associative behavior above the overlap concentration, with the fluorinated acid acting like a surfactant. A competition may also occur between PS—and R_F—mediated micellization. Copyright © 2004 Society of Chemical Industry     

The nature and role of incoherent interphase interfaces in diffusional solid-solid phase transformations

In this article, some views on the nature of incoherent interphase interfaces, and their role in the nucleation and growth processes governing the evolution of microstructure in solid-state diffusional transformations (reconstructive transformations), are explored. It is argued that essentially incoherent interfaces can be involved in the initiation and propagation of polymorphic transformations and massive transformations as well as in various precipitation phenomena in metallic and ceramic systems. Similar views have already been advanced earlier in connection with studies of massive transformations. Faceting along the interphase interface during nucleation and growth can derive from thermodynamic, kinetic, and crystallographic factors independent of the bicrystallography of the conjugate phases. This idiomorphic behavior can be relevant to both intergranular and intragranular phase formation. The concept of one-dimensional (1-D) commensuration of phases through plane edge-to-edge/row matching is an interesting extension of the classic ideas of coherency and bicrystallography and potentially important in characterizing the behavior of certain types of boundaries. However, the general importance of these geometrical relations in real and reciprocal space will depend on the depth of the energy wells in orientation space associated with these special boundaries. This article is based on a presentation made in the “Hume-Rothery Symposium on Structure and Diffusional Growth Mechanisms of Irrational Interphase Boundaries,” which occurred during the TMS Winter meeting, March 15–17, 2004, in Charlotte, NC, under the auspices of the TMS Alloy Phases Committee and the co-sponsorship of the TMS-ASM Phase Transformations Committee.     

Calculation of the standard heat capacities of crystalline oxides in the Fe-O-Ti system

Our earlier experimental studies of the solid-phase reduction of disseminated lump ores demonstrate that an oxide lattice transforms into a metal lattice via the saturation of the oxide crystal lattice by charged oxygen vacancies. Low-charge metal cations appear in the oxide crystal lattice, and they are related to oxygen vacancies by the condition of local electrical neutrality. As oxygen vacancies are accumulated (i.e., during reduction), the number of oxygen vacancy-low charge cation complexes in the initial oxide increases. The total composition of the oxide phase in the range of a crystal lattice of a certain type changes continuously from the initial oxide to the end product of reduction, i.e., to the lower oxide or a metal. Therefore, it is necessary to determine the thermal characteristics of not only all possible stoichiometric compounds in the M-O system but also MO_x oxides of variable compositions. Equations for calculating the standard heat capacities of complex stoichiometric oxides and oxides of variable compositions in the Fe-O-Ti system are derived using a mathematical model developed earlier, and these characteristics are calculated.     

Low temperature and strain rate dependence of fracture stress and fracture toughness on thin Fe40Ni40B20 amorphous ribbon

The fracture stress and the critical stress intensity factor of the Fe₄₀Ni₄₀B₂₀ amorphous metallic ribbons 20 μm thick were measured in the temperature range 4.2–300 K and at deformation rates from 3.3×10⁻⁶ to 1.25×10⁻³ m⁻¹ with the aim to obtain more information on the condition for the onset and development of the inhomogeneous plastic deformation and fracture.     

Investigations of high-performance GaAs solar cells grown on Ge-Si/sub 1-x/Ge/sub x/-Si substrates

High-performance p/sup +//n GaAs solar cells were grown and processed on compositionally graded Ge-Si/sub 1-x/Ge/sub x/-Si (SiGe) substrates. Total area efficiencies of 18.1% under the AM1.5-G spectrum were measured for 0.0444 cm/sup 2/ solar cells. This high efficiency is attributed to the very high open-circuit voltages (980 mV (AM0) and 973 mV (AM1.5-G)) that were achieved by the reduction in threading dislocation density enabled by the SiGe buffers, and thus reduced carrier recombination losses. This is the highest independently confirmed efficiency and open-circuit voltage for a GaAs solar cell grown on a Si-based substrate to date. Larger area solar cells were also studied in order to examine the impact of device area on GaAs-on-SiGe solar cell performance; we found that an increase in device area from 0.36 to 4.0 cm/sup 2/ did not degrade the measured performance characteristics for cells processed on identical substrates. Moreover, the device performance uniformity for large area heteroepitaxial cells is consistent with that of homoepitaxial cells; thus, device growth and processing on SiGe substrates did not introduce added performance variations. These results demonstrate that using SiGe interlayers to produce "virtual" Ge substrates may provide a robust method for scaleable integration of high performance III-V photovoltaics devices with large area Si wafers.