Characterization and antibacterial properties of nanoboron powders and nanoboron powder coated textiles

The antibacterial properties of boron-containing compounds are well known although there are limited studies available on the pure boron nanoparticles. In this paper, nanoboron particles are characterized in terms of their particle size, shape, stability and surface charge before and after their application onto textile surfaces to study their impact on bacterial activity. It was observed that the boron nanoparticles are effective in limiting the bacterial growth of both Gram-negative and positive species without requiring any stimulation to initiate the antibacterial action. In addition to the antibacterial functionality evaluation of the free boron nanoparticles, nanoboron coated textiles were also characterized and determined to change the wettability and surface charge of the textiles with a variable antimicrobial response to the different species. Consequently, we propose pure nanoboron as a new anti-bacterial agent that can function without external stimulation.     

The identification of sea swell using polarimetric radars: A new full wave approach

The statistical characteristics and the orientation of a remotely generated swell superimposed upon a local wind generated rough sea surface are determined from computer simulated polarimetric data. The full wave approach is used to determine the incoherent backscatter Mueller matrix elements and the incoherent backscatter Graves power matrix elements as functions of azimuth angle, the colatitude (angle measured from the vertical axis), and rough sea surface (with swell) parameters. The relationships between the incoherent backscatter Mueller matrix as well as the incoherent backscatter Graves power matrix and the statistical characteristics of the swell and its orientation are presented here. On making suitable selections of the backscatter angle and polarization of the Mueller matrix elements or Graves power matrix elements, it is possible to determine reliably the orientation and statistical characteristics of remotely generated swells. Traditionally only the scattering cross sections are utilized in remote sensing.     

Comparative evaluation of full‐scale UASB reactors treating alcohol distillery wastewaters in terms of performance and methanogenic activity

In this study, two full‐scale upflow anaerobic sludge blanket (UASB) reactors, namely TUASB and CUASB, at the wastewater treatment plants of the Tekirdaǧ Alcohol (Raki) and Canakkale Alcohol (Cognac) distilleries were investigated in terms of performance, acetoclastic methanogenic capacity and microbial composition. The results were compared with a previously studied other UASB reactor (IUASB) at the wastewater treatment plant of the Istanbul Alcohol (Raki) Distillery from which the two reactors (TUASB and CUASB) were seeded. The IUASB reactor performed well achieving COD removal efficiencies of no lower than 85% at organic logding rates (OLRs) in the range of 6–11 kg COD m⁻³ day⁻¹ between 1996 and 2001. During the last one year of operation, between 2000 and 2001, performance of the CUASB reactor in terms of COD removal efficiency was 70–80% at OLRs in a range of 1–4.5 kg COD m⁻³ day⁻¹ whereas it was 60–80% at OLRs in a range of 2.5–8.5 kg COD m⁻³ day⁻¹ in the TUASB reactor. At the end of year 2000, specific methanogenic activity (SMA) tests were carried out to determine potential loading capacity and optimum operating conditions of the IUASB, CUASB and TUASB reactors. The potential methane production (PMP) rates of the CUASB, IUASB and TUASB reactors were measured as 230 cm³ CH₄ gVSS⁻¹ day⁻¹, 350 cm³ CH₄ gVSS⁻¹ day⁻¹ and 376 cm³ CH₄ gVSS⁻¹ day⁻¹ respectively. When the PMP rates were compared with actual methane production (AMP) rates obtained from the three UASB reactors, AMP/PMP ratios were evaluated to be 0.18, 0.12 and 0.13 for CUASB, TUASB and IUASB reactors respectively. This showed that the CUASB, TUASB and IUASB reactors were using only 18%, 12% and 13% of their potential acetoclastic methanogenic capacity respectively. These results can be interpreted that the three UASB reactors were underloaded compared with their potential acetoclastic methanogenic capacities. It was, therefore, recommended that the three UASB reactors should be loaded at higher organic loading rates or sludge withdrawn in order to maintain an AMP/PMP ratio of 0.6–0.7, which can ensure desired reactor performance with safer operation. Results of epifluoresence microscopic examinations showed that the percentage of total autofluorescent methanogens was approximately 30% of the total population in sludges from the TUASB and IUASB reactors whereas it was 20% in sludge from the CUASB reactor. The two UASB reactors treating raki distillery wastewaters contained sludges having a higher percentage of autofluorescent methanogenic population and higher acetoclastic methanogenic activity. Copyright © 2004 Society of Chemical Industry     

Determination of potential methane production capacity of a granular sludge from a pilot‐scale upflow anaerobic sludge blanket reactor using a specific methanogenic activity test

A 450 dm³ pilot‐scale upflow anaerobic sludge blanket (UASB) reactor was used for the treatment of a fermentation‐based pharmaceutical wastewater. The UASB reactor performed well up to an organic loading rate (OLR) of 10.7 kg COD m^?3 d^?1 at which point 94% COD removal efficiency was achieved. This high treatment efficiency did not continue, however and the UASB reactor was then operated at lower OLRs for the remainder of the study. Specific methanogenic activity (SMA) tests were, therefore, carried out to determine the potential loading capacity of the UASB reactor. For this purpose, the SMA tests were carried out at four different initial acetate concentrations, namely 500 mg dm^?3, 1000 mg dm^?3, 1500 mg dm^?3 and 2000 mg dm^?3 so that substrate limitation could not occur. The results showed that the sludge sample taken from the UASB reactor (OLR of 6.1 kg COD m^?3 d^?1) had a potential acetoclastic methane production (PMP) rate of 72 cm³ CH₄ g^?1 VSS d^?1. When the PMP rate was compared with the actual methane production rate (AMP) of 67 cm³ CH₄ g^?1 VSS d^?1 obtained from the UASB reactor, the AMP/PMP ratio was found to be 0.94 which ensured that the UASB reactor was operated using its maximum potential acetoclastic methanogenic capacity. In order to achieve higher OLRs with desired COD removal efficiencies it was recommended that the UASB reactor should be loaded with suitable OLRs pre‐determined by SMA tests. © 2001 Society of Chemical Industry     

Tilt modulation of high resolution radar backscatter crosssections: unified full wave approach

The unified full wave approach is used to determine the tilt modulation of the like- and cross-polarized (high-resolution) radar backscatter cross sections for the rough sea surface. Real or synthetic aperture radars (SARs) with small effective footprints (resolution cells) are considered. Since the unified full-wave approach accounts for Bragg scattering as well as specular point scattering in a self-consistent manner, it is not necessary to adopt a two-scale model for the rough sea surface. The sea surface slope probability density function is assumed to be Gaussian. The backscattering cross sections are evaluated for all angles of incidence (normal to grazing). For tilts in the plane of incidence, the modulation of all the cross sections is largest at angles of incidence of 10°. The cross-section modulation due to tilts perpendicular to the plane of incidence critically depends on the incident and scattered polarizations. The effective filtering of the large-scale spectral components of the rough sea surface by the high-resolution radar is accounted for, and the dependence of the cross-section tilt modulation on the size of the effective footprint is determined     

Scattering cross sections for composite rough surfaces using the unified full wave approach

The full wave approach is used to derive a unified formulation for the like and cross polarized scattering cross sections of composite rough surfaces for all angles of incidence. Earlier solutions for electromagnetic scattering by composite random rough surfaces are based on two-scale models of the rough surface. Thus, on applying a hybrid approach physical optics theory is used to account for specular scattering associated with a filtered surface (consisting of the large sonic spectral components of the surface) while perturbation theory is used to account for Bragg scattering associated with the surface consisting of the small scale spectral components. Since the full wave approach accounts for both specular point scattering and Bragg scattering in a self-consistent manner, the two-scale model of the rough surface is not adopted in this work. These unified full wave solutions are compared with the earlier solutions and the simplifying assumptions that are common to all the earlier solutions are examined. It is shown that while the full wave solutions for the like polarized scattering cross sections based on the two-scale model are in reasonably good agreement with the unified full wave solutions, the two solutions for the cross polarized cross sections differ very significantly.     

Horizontally polarized waves in inhomogeneous media--Energy conservation and reciprocity relationships

Full wave solutions for the electromagnetic fields of a horizontally polarized wave propagating through an inhomogeneous ionized medium are derived using a generalized WKB method. Both the electron density and the collision frequency of the horizontally stratified media are assumed to vary and special attention is given to permittivity profiles with critical coupling regions. The reflection and transmission coefficients and the characteristic surface impedance for an inhomogeneous layer of finite thickness are computed as functions of the transverse wave number for various permittivity profiles. Excitation of both propagating and evanescent waves are considered. For some special permittivity profiles considered, closed form analytical solutions for the electromagnetic fields are known. Computations derived from these solutions are in good agreement with those obtained using the generalized WKB method. The results are also shown to satisfy energy conservation and reciprocity relationships in electromagnetic theory.     

Product design, semantics and emotional response

This paper explores theoretical issues in ergonomics related to semantics and the emotional content of design. The aim is to find answers to the following questions: how to design products triggering "happiness" in one's mind; which product attributes help in the communication of positive emotions; and finally, how to evoke such emotions through a product. In other words, this is an investigation of the "meaning" that could be designed into a product in order to "communicate" with the user at an emotional level. A literature survey of recent design trends, based on selected examples of product designs and semantic applications to design, including the results of recent design awards, was carried out in order to determine the common attributes of their design language. A review of Good Design Award winning products that are said to convey and/or evoke emotions in the users has been done in order to define good design criteria. These criteria have been discussed in relation to user emotional responses and a selection of these has been given as examples.     

A new model for the hazardous waste location-routing problem

Hazardous waste management involves the collection, transportation, treatment and disposal of hazardous wastes. In this paper a new multiobjective location-routing model is proposed. Our model also includes some constraints, which were observed in the literature but were not incorporated into previous models. The aim of the proposed model is to answer the following questions: where to open treatment centers and with which technologies, where to open disposal centers, how to route different types of hazardous waste to which of the compatible treatment technologies, and how to route waste residues to disposal centers. The model has the objective of minimizing the total cost and the transportation risk. A large-scale implementation of the model in the Central Anatolian region of Turkey is presented.