持续发展是唯一出路

讨论了人类、环境与发展的关系，指出不适当的发展模式已使三者之间形成恶性循环，必须及时地改变发展模式。列举了中国面临的严重环境问题，指出只有走可持续发展的道路才是唯一出路。并提出为实施可持续发展应注意的６个主要问题。     

凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

Hydrothermal products of the C3MS2-C12A7-MgO system

The autoclave products of reduced steel-slag of an electronic furnace mainly containing C₃MS₂ phase were detected. The hydrothermal products of this slag included calcio-chondrodite, brucite, and hydrogarnet phases. When suitable (CaO + MgO)/SiO₂ molar ratios were chosen, C₃MS₂ can react with SiO₂ to produce calcium silicate hydrates tobermorite, xonotlite, gyrolite, and truscottite phases with different saturated water vapor pressures. The phase brucite was present along with tobermorite, whereas phases Mg-xonotlite, Mg-gyrolite, and Mg-truscottite can rarely coexist with brucite. Hydrogarnet phase disappeared when Mg-truscottite was formed.     

离子色谱法测定配煤、焦炭和焦油中的氯含量

研究了用带电导检测器的离子色谱对配煤、焦炭和焦油中的Cl- 进行测定的方法。在YSA型8126A-4# 阴离子分离柱上用3.5mmol/LNa2CO3、5.3mmol/LNaHCO3做淋洗液对Cl-进行测定,方法简便快速。Cl-的检出限为2×10-6。该法也适用于F-、NO2-、NO3-、SO42-等的测定。     

几种表面活性剂在香精产品中的应用

本文阐述了几种表面活性剂在香精中应用的调配研究过程以及期间出现的不同现象,并对其进行了对比、比较.细述了这几种表面活性剂在应用过程中所出现的不同特征.     

A Non-Line-of-Sight mitigation localization algorithm for sensor networks using clustering analysis

Non-Line-of-Sight propagation of wireless signal has an impact on measured distances in range-based localization and will bias the final localization results. A new localization algorithm is proposed in this paper to mitigate Non-Line-of-Sight errors when there are more than enough anchor nodes deployed around the node to be located. This algorithm utilizes multi-round clustering analysis to filter the pre-located estimators which derive from all possible subsets of measured distances. In each round, the method density-based spatial clustering of applications with noise is adopted. Simulations show that the proposed algorithm can effectively improve localization accuracy not only when the measured distances with Non-Line-of-Sight error are minor but also under the condition that all of them suffer random Non-Line-of-Sight error.     

注塑模微机CAD系统

本文介绍了一个微机上运行的注塑模ＣＡＤ系统，此系统主要解决了四个难点，浇注系统设计，冷却系统分析，型腔，型芯的曲面造型设计，装配图和零件工作图的设计绘制，经厂家实际运用证明，该系统使用方便，结果正确，能提高设计效率，降低生产成本。     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

基于SOAP的企业异构信息系统集成

阐述了SOAP通信协议的构成和实现机制以及与相似协议的比较。基于它的跨平台的能力,将其运用于企业的分布式环境中,实现了异构信息系统间的互操作和跨部门的数据处理,提高企业数据处理的效能,同时为企业异构信息系统集成提供了新的方法。