A global model for residential energy use: Uncertainty in calibration to regional data

Uncertainties in energy demand modelling allow for the development of different models, but also leave room for different calibrations of a single model. We apply an automated model calibration procedure to analyse calibration uncertainty of residential sector energy use modelling in the TIMER 2.0 global energy model. This model simulates energy use on the basis of changes in useful energy intensity, technology development (AEEI) and price responses (PIEEI). We find that different implementations of these factors yield behavioural model results. Model calibration uncertainty is identified as influential source for variation in future projections: amounting 30% to 100% around the best estimate. Energy modellers should systematically account for this and communicate calibration uncertainty ranges.     

Concentration of phenolic compounds from apple pomace extracts by nanofiltration at lab and pilot scale with a techno‐economic assessment

Apple pomace can be used as resource for the extraction of phenolic compounds with antioxidant properties. Pressing of apple in juice and pomace at lab scale in open air (aerobic) and under N₂ atmosphere (anaerobic) showed a recovery of phenolic compounds of 85% in juice and pomace after anaerobic pressing, compared to 43% after aerobic pressing, indicating loss of phenolic compounds by oxidation and the advantage of anaerobic over aerobic pressing. After a membrane screening and concentration test at lab scale, the commercial nanofiltration membrane NFX was selected to concentrate phenolic compounds in an ethanol : water extract of apple pomace. At pilot scale, the concencentration of 10 selected phenolic compounds and quinic acid increased from 59.5 mg/L in the ethanol : water extract to 1256.1 mg/L in the final retentate, that is, by a factor 21.1. The volume of the crude extract was reduced by a factor of 28.5 during the filtration, indicating some loss of phenolic compounds during pilot testing due to membrane fouling or oxidation of polyphenols. The pilot concentration test using a spiral‐wound membrane module showed good flux and concentration of phenolic compounds, indicating the technical feasibility of membrane technology for efficient concentration of polyphenols in an ethanol : water extraction solvent. Unfortunately, the extraction and concentration process was not economically feasible under the assumptions made.

Practical applications

The valorization of food waste for the production of high‐added value products is an increasingly hot topic. Phytochemicals are present in relatively low concentration in the fruit matrix, and concentration in the extraction solvent is necessary to develop an industrially relevant process. In this study, membrane filtration was selected for concentration due to its low energy consumption and mild processing conditions compared to other technologies. Membrane screening and testing at lab and pilot scale with techno‐economic assessment can be used by food and nutraceutical industries to evaluate membrane technology for concentration of phytochemicals extracted from agroindustrial by‐products.     

临时博物馆

精选理由这是一个单层的临时博物馆建筑。其柔和、细腻的流线形外观,抽象自湖水水流形成的轮廓。设计师让博物馆置于大面积的绿地当中,其略显瘦小的体量巧妙地融入到周围环境之中。建筑采用了未经处理的木材,其质地和色彩更赋予了建筑一种柔美和温婉。     

Effect of intrauterine dextrose or antibiotic therapy on reproductive performance of lactating dairy cows diagnosed with clinical endometritis

The objectives of this study were to assess the responses to treatments (clinical cure and cow survival 14 d posttherapy) of cows with clinical endometritis (CE) that received intrauterine infusion of a hypertonic solution of 50% dextrose (DEX) or subcutaneous ceftiofur crystalline free acid (CCFA) and subsequent pregnancy per artificial insemination (P/AI) in cows with CE compared with cows without CE. Cows (n=760) from 2 dairy herds were screened for CE using vaginoscopy and measurement of cervix diameters [exam 1; 26±3 d in milk (DIM)]. Cows with vaginal discharge scores of 2 or 3 (scale 0-3) were stratified by parity and randomly allocated into 1 of 3 treatment groups: (1) intrauterine infusion (～200 mL) of 50% DEX solution (n=79); (2) 6.6 mg/kg single-dose of subcutaneous administration of CCFA (n=75); or (3) untreated control animals (CON, n=83). Fourteen days posttherapy (at 40±3 DIM), cows with CE were re-examined (exam 2; 40±3 DIM) to assess the response to treatments. All cows were presynchronized with 2 injections of PGF(2α) given 14 d apart (starting at 26±3 DIM) followed by Ovsynch (OV; GnRH-7 d-PGF-56 h-GnRH 16 h-timed-AI) 12 to 14 d later. Cows displaying signs of standing estrus any time during the protocol were inseminated, whereas the remaining cows were subjected to timed AI 16 h after the second GnRH of OV. Pregnancy diagnosis was performed via transrectal ultrasonography at 39±3d post-AI followed by pregnancy reconfirmation 30 d after the first pregnancy diagnosis. Uterine swabs revealed that Arcanobacterium pyogenes and Escherichia coli were the most predominant bacteria isolated at the time of treatments. Mortality within 14 d posttherapy was not different among treatment groups. Cows with CE had greater cervical diameter at exam 1 and decreased P/AI compared with cows without CE. Treatment with CCFA or DEX increased the proportion of cows with clear vaginal discharge (score 0; clinical cure) 14 d posttherapy compared with CON cows. Pregnancy per AI from DEX (29.8±4%) cows tended to differ from that of CON (21.1±4%) or CCFA cows (19.7±4%), but it resulted in similar P/AI as those cows without CE (39.1±2%). The use of intrauterine DEX alone or as an adjunct of antibiotic therapy for the treatment of CE needs further investigation.     

Complementary integrated circuits on plastic foil using inkjet printed n- and p-type organic semiconductors: Fabrication,characterization, and circuit analysis

Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS–PEN) and a rylene carboxylic diimide derivative for p- and n-channel thin-film transistors (TFTs) were fabricated on flexible foils. The so-called staggered TFT configuration is used, meaning that the semiconductors layers are deposited last. The work-function of the injecting gold electrodes were modified using several self-assembled monolayers (SAMs). For optimized contacts the mobility of the n- and p-channel TFTs was 0.5 cm²/Vs and 0.2 cm²/Vs, respectively. Strongly degraded performance is obtained when the n-channel material was printed on contacts optimized for the p-channel TFT, and vice versa. This illustrates that for CMOS circuits we need careful work-function engineering to allow proper injection for both electrons and holes. We show for the first time that by using a bimolecular mixture for the SAM we can systematically vary the work function, and demonstrate how this affects the performance of discrete n-type and p-type transistors, as well as CMOS inverters and ring oscillators. Under optimal processing conditions we realized complementary 19-stage ring oscillators with 10 μs stage delay operating at 20 V.     

A novel safety assessment strategy for non-intentionally added substances (NIAS) in carton food contact materials

One of the main challenges in food contact materials research is to prove that the presence of non-intentionally added substances (NIAS) is not a safety issue. Migration extracts may contain many unknown substances present at low concentrations. It is difficult and time-consuming to identify all these potential NIAS and concurrently to assess their health risk upon exposure, whereas the health relevance at low exposure levels might not even be an issue. This paper describes a scientifically based, but pragmatic safety assessment approach for unknown substances present at low exposure levels in food contact matrices. This complex mixture safety assessment strategy (CoMSAS) enables one to distinguish toxicologically relevant from toxicologically less relevant substances, when related to their respective levels of exposure, and allows one to focus on the substances of potential health concern. In particular, substances for which exposure will be below certain thresholds may be considered not of health relevance in case specific classes of substances are excluded. This can reduce the amount of work needed for identification, characterisation and evaluation of unknown substances at low concentration. The CoMSAS approach is presented in this paper using a safety assessment of unknown NIAS that may migrate from three carton samples.     

SiGe epitaxy on a 300 mm batch furnace

This work reports the feasibility of silicon and silicon germanium epitaxy using an ASM A412(TMa) LPCVD all quartz, hot wall, vertical batch furnace reactor using 100 wafer product loads. The very same furnace can be used for 25 wafer and 200 wafer load size, without any hardware changes, dependant on production needs. Following this approach a significant cost reduction for epitaxy in 300 mm high volume manufacturing is possible and enables new applications. The native oxide of the substrate was removed by wet chemical cleaning with time coupling of less than 1 h and subsequent in-situ low pressure hydrogen anneal prior to Si or SiGe deposition. The epitaxial layers were grown using silane and germane. The Si and SiGe layers have been characterized with ToFSIMS, XRD, Raman, AFM and TEM confirming excellent crystalline quality, layer thickness and within wafer SiGe stoichiometry uniformity.     

Transformation of Candida albicans by electroporation

In contrast to a variety of other yeasts, Candida albicans has proved difficult to transform with high efficiency. Lithium acetate transformation is fast and simple but provides a very low efficiency of DNA transfer (50-100 transformants/microg DNA), while spheroplast transformation, although more efficient ( approximately 300 transformants/microg integrative DNA and 10(3)-10(4) transformants/microg replicative DNA), is complicated and time-consuming. In this study we applied various yeast transformation techniques to C. albicans and selected an electroporation procedure for further optimization. Transformation efficiencies of up to 300 transformants/microg were obtained for an integrative plasmid and up to 4500 transformants/microg for a CARS-carrying plasmid. This reasonably high transformation efficiency, combined with the ease and speed of electroporation in comparison to alternative techniques, make it the preferred method for transformation of C. albicans.