A modified technique of the triple pelvic osteotomy: early results

A modification of the triple pelvic osteotomy for children over 8 years and the young adult is described. The results of the first 32 cases are reviewed. These show that the indications for the operation can be widened so that not only primary dysplasias but also subluxated or dislocated hips with secondary dysplasia can be operated on successfully. The operation is done in two stages. At first the patient is lying prone. The osteotomy of the ischial ramus is done dorsally by cutting the connection between the sciatic notch and obturator foramen immediately behind and below the acetabulum. In the second stage, with the patient lying supine, the pubic and the iliac osteotomy are performed rather circular and parallel to the hip joint. These modifications have several advantages: (a) the operator has a direct field of view at all times; (b) the osteotomy is performed close to the acetabulum, thus allowing a great amount of lateral rotation and medial displacement of the acetabulum, thereby providing good coverage of the femoral head by hyaline cartilage; and (c) the ischial ramus and its ligaments to the sacrum are left intact, leading to greater stability of the pelvis and spine.     

The structural characterization of (NH4)2B10H10 and thermal decomposition studies of (NH4)2B10H10 and (NH4)2B12H12

The structure of (NH₄)₂B₁₀H₁₀ (1) was determined through powder XRD analysis. The thermal decomposition of 1 and (NH₄)₂B₁₂H₁₂ (2) was examined between 20 and 1000 °C using STMBMS methods. Between 200 and 400 °C a mixture of NH₃ and H₂ evolves from both compounds; above 400 °C only H₂ evolves. The dihydrogen bonding interaction in 1 is much stronger than that in 2. The stronger dihydrogen bond in 1 resulted in a significant reduction by up to 60 °C, but with a corresponding 25% decrease in the yield of H₂ in the lower temperature region and a doubling of the yield of NH₃. The decomposition of 1 follows a lower temperature exothermic reaction pathway that yields substantially more NH₃ than the higher temperature endothermic pathway of 2. Heating of 1 at 250 °C resulted in partial conversion of B₁₀H₁₀²⁻ to B₁₂H₁₂²⁻. Both 1 and 2 form an insoluble polymeric material after decomposition. The elements of the reaction network that control the release of H₂ from the B₁₀H₁₀²⁻ can be altered by conducting the experiment under conditions in which pressures of NH₃ and H₂ are either near, or away from, their equilibrium values.     

Enzymatic examination of citrate-isocitrate accumulation in yeasts

The activities of the enzymes citrate synthase, aconitate hydratase, isocitrate dehydrogenase and isocitrate lyase in cell homogenates of n-paraffin grown citrate plus isocitrate accumulating yeasts (C. lipolytica high rate accumulating strain and C. guilliermondii low rate accumulating strain) were determined. It is shown that the activities of the enzymes decline after transition from tropho- to idiophase and remain constant with exception of isocitrate lyase which diminishes slowly. The decline in activity of the isocitrate lyase was greatest in the cells of C. guilliermondii. It is discussed that the differences of the enzymatic activities in the tropho- and idiophase, resp. may be artefacts due to changes in the structure of cellular envelope, but that the decline of lyase activity in the idiophase could be one factor determining the rate of citric- and isocitric acid overproduction. The diminishing of isocitrate lyase in the course of idiophase is interpreted as example of a disappearing enzyme no further needed for normal function of the cells.     

Calculation of the bursting speed of one side recessed grinding wheels

Grinding tools like one side recessed grinding wheels are used in many machining applications and must provide a high reliability against fracture concerning safety-relevant and economic aspects. The calculation of the bursting speed on the basis of the mechanical properties is an important tool for the design of grinding wheels. However, no equation is available to estimate the bursting speed of these types of grinding tools so far. For the calculation of the bursting speed of one side recessed grinding wheels a parametric study using FEA was carried out. The results of these investigations provide the basis for a geometric function, which allows in association with a newly-developed fracture criteria to calculate the bursting speed of one side recessed grinding wheels. For the validation of the developed concept spin burst tests with grinding wheels of eight different geometries and two granulations were carried out. The results of these investigations show a very good correlation of the calculated and measured bursting speeds for all tested types of grinding wheels.     

Activity,selectivity, and methanol tolerance of novel carbon-supported Pt and Pt<Subscript>3</Subscript>Me (Me = Ni,Co) cathode catalysts

The activity, selectivity, and methanol tolerance of novel, carbon supported high-metal loading (40 wt.%) Pt/C and Pt₃Me/C (Me = Ni, Co) catalysts for the O₂ reduction reaction (ORR) were evaluated in model studies under defined mass transport and diffusion conditions, by rotating (ring) disk and by differential electrochemical mass spectrometry. The catalysts were synthesized by the organometallic route, via deposition of pre-formed Pt and Pt₃Me pre-cursors followed by their decomposition into metal nanoparticles. Characteristic properties such as particle sizes, particle composition and phase formation, and active surface area, were determined by transmission electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. For comparison, commercial Pt/C catalysts (20 and 40 wt.%, E-Tek, Somerset, NJ, USA) were investigated as well, allowing to evaluate Pt loading effects and, by comparison with the pre-cursor-based catalyst with their much smaller particle sizes (1.7 nm diameter), also particle size effects. Kinetic parameters for the ORR were evaluated; the ORR activities of the bimetallic catalysts and of the synthesized Pt/C catalyst were comparable and similar to that of the high-loading commercial Pt/C catalyst; at typical cathode operation potentials H₂O₂ formation is negligible for the synthesized catalysts. Due to their lower methanol oxidation activity the bimetallic catalysts show an improved methanol tolerance compared to the commercial Pt/C catalysts. The results indicate that the use of very small particle sizes is a possible way to achieve reasonably good ORR activities at an improved methanol tolerance at DMFC cathode relevant conditions.     

Tumor-suppressor gene products in cell contacts: the cadherin-APC-armadillo connection

Various structural components of intercellular junctions have recently been found to represent (or be related to) products of tumor-suppressor genes. The tumor-suppressor gene product adenomatous polyposis coli (APC) binds to beta 2-catenin (homologous to the product of Drosophila armadillo), which is cytoplasmically associated with the cell adhesion molecule E-cadherin.     

(R,R)-2,2'-[1,2-ethanediylbis[imino(1-methyl-2,1-ethanediyl)]]- bis[5-nitro-1H-benz[de]isoquinoline-1,3-(2H)-dione] dimethanesulfonate (DMP 840), a novel bis-naphthalimide with potent nonselective tumoricidal activity in vitro

(R,R)-2,2'-[1,2-ethanediylbis[imino(1-methyl-2,1-ethanediyl)]]- bis[5-nitro-1H-benz[de]isoquinoline-1,3-(2H)-dione] dimethanesulfonate (DMP 840), is a bis-naphthalimide anticancer tumoricidal agent currently in phase I clinical trials. DMP 840 exhibits curative activity in human tumor xenografts, where it shows selectivity for human solid tumors over murine leukemias. In contrast to the selectivity found for DMP 840 in vivo, DMP 840 exhibits potent antiproliferative activity in vitro against a variety of human and murine leukemia and solid tumor cell lines in culture, with inhibitory doses that reduce the number of treated cells to one half (IC50) values ranging from 2.3 to 53 nM. DMP 840 was growth inhibitory to three doxorubicin-resistant cell lines with IC50 values also in the nanomolar range. Clonogenic survival experiments showed that DMP 840 was equally cytotoxic to both exponentially growing and quiescent human clone A colon carcinoma cells. A 1-h incubation of DMP 840 (1.22-12 microM) caused 5-log cell kill in KB-3-1 human epidermoid carcinoma, clone A human colon carcinoma, and L1210 murine leukemia cell lines. The rapid cell killing by DMP 840 in clonogenic survival experiments and initial mechanism of action studies was consistent with a DNA-interactive mechanism for DMP 840 cytotoxicity. Mechanism of action studies in L1210 leukemia cells demonstrated that DMP 840 inhibited the incorporation of thymidine and uridine into DNA and RNA with IC50 values of 0.55 and 0.08 microM, respectively. DMP 840 produced DNA single-strand breaks in a dose-dependent manner. Double-strand breaks were not observed with DMP 840 treatment, even at higher concentrations of compound. Chinese hamster ovary (CHO) and P388 cells resistant to camptothecin and containing a mutant form of topoisomerase I were also used to evaluate whether DMP 840 was cross-resistant with agents active against topoisomerase I. While the CHOR line was 163-fold resistant to camptothecin, the CHOR line was only 1.7-fold resistant to DMP 840. In summary, DMP 840 is a DNA-interactive agent that demonstrates excellent antiproliferative activity in vitro against cultured tumor cells from both human and murine sources. Its mechanism of tumoricidal activity may be novel.     

The return of degraded stream ecosystems by using positive impacts from near‐natural sections: a new practical guide for restorations

Streams in North Rhine‐Westphalia (Germany) are frequently impacted by hydromorphological degradation leading to a loss of sensitive species and a reduction in diversity. These findings mean that the final objective of the European Water Framework Directive to achieve the good ecological status will be failed for a large number of streams. In a holistic approach, a new concept, considering the cost efficiency, has been developed to enhance habitats by morphological changes. This guide serves as a basis for stream restoration projects. The theoretical background is that near‐natural sections influence adjacent sections of medium habitat quality positively by migration of type‐specific sensitive organisms. The preconditions are a local taxa richness in the catchment area, the reduction of nutrients and organic matter, and the guarantee of free movement. This so‐called ‘spreading effect’ can be measured upstream and downstream. The length of by these means valourized sections depends on the stream type and on the biological quality component.     

Production of Strong Steel‐Aluminum Composites by Formation of Intermetallic Phases in Compound Forging

In times of increasing energy costs automotive light weight construction is gaining more importance. The production of hybrid compounds by forging is a promising method to successfully manufacture functional parts by applying resource‐saving process steps. However, in compound forging of steel‐aluminum parts shrinking gaps may form because of the different thermal expansion coefficients. To avoid these unwanted gaps, it is necessary to achieve a firmly bonded joint e.g. by intermetallic phases. This paper deals with the investigation of the influences of different sample preparations, process parameters and true strains on the formation of intermetallic phases. Thus, the optimum production parameters for compound forging of steel‐aluminum parts will be determined.