This study presents a planning model for Swedish activities in the field of wind power. Models and results of calculations of the land-based wind energy potential with the Wind Atlas Analysis and Application Programme, WAsP, are described and analysed in a geographical information systems (GIS) called the ArcView® GIS system. One county in southern Sweden was chosen as a case study to present the methods used. The results from that case study indicate a great wind energy potential but there are nevertheless many factors limiting that potential. The study calls for a further development of planning tools in the field. Important areas for the future are the development of knowledge in market issues, wind power technology, environmental issues, and public opinion on constructing wind turbines. 相似文献
The objective is to characterise the solar collector during a relatively short testing period with no requirement for steady state climatic conditions. This information is then used for predicting annual performance of the collector. A standard collector model that is compatible with the ISO 9806-1 test standard is used with correction terms for beam and diffuse incidence angle modifiers, thermal capacitance, wind speed and sky temperature. This results in a more complete characterisation of the collector. The collector parameters are identified by multiple linear regression, MLR. The method has been tested for characterisation of unglazed collectors, glazed flat plate collectors, evacuated tubular collectors, CPC collectors and concentrating collectors with satisfying results. Typically the correlation coefficient R2 is better than 0.99 and the standard deviation of the difference between model and measurement is in the range 3–10 W/m2.
In the original method the angular dependence of the optical efficiency and the temperature dependence of the heat losses are supposed to be adjusted to a predetermined function. The most recent development is a routine that makes it possible to accurately identify non-linear optical and thermal performance. This extended MLR method can identify the zero loss efficiency for every angle of incidence interval and the temperature dependent heat losses for every temperature interval. This opens the application of the method to collectors with special incidence angle and heat loss effects that cannot be described easily with a combination of elementary functions. Instead a table of parameter values is determined, which is used directly in standard simulation programmes. This method will further increase the accuracy when comparing different collector designs. It has been used for comparing different glazings and for comparison with spectrophotometric measurements. It has also been used for analysing the heat loss factors for Teflon and honeycomb glazings. Since the total power output of the collector is less dependent on the heat loss coefficient than on the optical efficiency the scattering in this data is larger than for the incidence angle curves.
The reflectance of booster mirrors cannot be derived with the MLR-method with acceptable accuracy. The correlation between direct irradiance and irradiance from the reflector exhibit a very strong correlation. Instead the effective reflectance of the mirror can be estimated by comparison of the measured output with calculation by the complete collector and reflector model. This effective reflectance is not compatible with the specular reflectance obtained from spectrophotometric measurements caused by large differences in acceptance angles.
Standard multiple linear regression available in most spread sheet and statistical programs can be used for the parameter identification in the extended MLR-procedure. The identification takes only a few seconds. At the Älvkarleby Laboratory the test method is now used as a routine tool for the evaluation of new collector materials and designs. The Swedish National testing institute has evaluated the methods with the conclusion that they have a potential for being used in standardised collector testing. 相似文献
Citalopram is one of several selective serotonin reuptake inhibitors (SSRIs) commonly found in treated sewage effluents. Accordingly, there are concerns about possible adverse effects of SSRIs on aquatic organisms, particularly behavioural effects similar to those associated with SSRI use in humans. Rainbow trout fry and adult male guppies were therefore exposed to waterborne citalopram, ranging from environmentally relevant to high concentrations (1, 10, 100 μg/L) for 3-7 days. Under these experimental conditions citalopram does not appear to cause significant effects on aggression in rainbow trout fry or on sexual behaviour in male guppies. This may be explained by a relatively low uptake of citalopram from water to fish. 相似文献
Let the unknown linear system
, be given, together with the a priori information that for a known, nonnegative integer l, there is a (nonadaptive) regulator of order l which stabilizes the system. It is shown that this suffices as a priori information for an adaptive stabilizing controller. An example of such an algorithm is given. This yields a continuous regulator, which does not utilize probing signals. It is based on a dense search through parameter space, and does not utilize high-gain properties, as opposed to the ‘universal regulators’ proposed before [3–6]. In the absence of information of such an l, it is shown how to modify the algorithm to search over the regulator structures, i.e. the controller's dimension. 相似文献
The deactivation of a commercial type V2O5-WO3-TiO2 monolith catalyst under biomass combustion was studied at a full-scale grate-fired power plant burning straw/wood using a slip stream pilot scale reactor. The aerosols in the flue gas consisted of a mixture of potassium chloride and sulphate. Three catalyst elements were exposed at 350 °C, and one element was exposed at 250 °C for comparison. The catalyst activity was measured in the reactor at the exposure temperature by addition of NH3 and extra NO. The activity, in terms of a first-order rate constant, dropped by 52% after about 1140 h indicating a very fast deactivation compared to coal firing. It was also found that the reactor temperature was not of importance for the deactivation rate. SEM-EDX analysis showed that particle deposition and pore blocking contributed to the deactivation by decreasing the diffusion rate of NO and NH3 into the catalyst. However, potassium also penetrated into the catalyst wall and the resulting average K/V ratio in the catalyst structure was high enough (about 0.3–0.5) for a significant chemical deactivation. Chemisorption studies carried out in situ showed that the amount of chemisorbed NH3 on the catalyst decreased as a function of exposure time, which reveals that Brøndsted acid sites had reacted with potassium compounds and thereby rendered inactive. When washed by 0.5 M H2SO4 the regenerated catalyst regains a higher activity than that of the fresh catalyst at temperatures higher than 300 °C, but even though reactivation is possible, the deactivation rate appears too high for practical use of the SCR process in straw combustion. 相似文献
As part of an effort to characterize the uncertainties associated with heat flux measurements in a fire environment, an uncertainty analysis example was performed using measurement data from a room corner surface products test that followed the guidelines of ISO 9705. Equations to model the heat transfer at the surface of a Schmidt‐Boelter (thermopile) type total heat flux gauge were selected for use to calculate the incident radiative flux from a total heat flux measurement. The effects of the heat flux measurement uncertainty sources were evaluated by conducting an uncertainty propagation on the resulting equation for incident radiation. For the model equations and the example conditions selected, the free‐stream temperature estimate and the heat flux gauge calibration constant were determined to be major uncertainty contributors. The study demonstrates how to systematically identify major sources of uncertainty for the purpose of reducing total uncertainty and thereby enhancing experiment design. Published in 2003 John Wiley & Sons, Ltd. 相似文献
The generality of latent variable modeling of individual differences in development over time is demonstrated with a particular emphasis on randomized intervention studies. First, a brief overview is given of biostatistical and psychometric approaches to repeated measures analysis. Second, the generality of the psychometric approach is indicated by some nonstandard models. Third, a multiple-population analysis approach is proposed for the estimation of treatment effects. The approach clearly describes the treatment effect as development that differs from normative, control-group development. This framework allows for interactions between treatment and initial status in their effects on development. Finally, an approach for the estimation of power to detect treatment effects in this framework is demonstrated. Illustrations of power calculations are carried out with artificial data, varying the sample sizes, number of timepoints, and treatment effect sizes. Real data are used to illustrate analysis strategies and power calculations. Further modeling extensions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
In this study, the recent persistent growth of regional house price pattern in Sweden is explained by the fundamental variables and the regional distributive perspective on household income and wealth are indicated to be important to understand the different level and development of regional housing market. We also discuss the long running relationship between house prices and migration flows and highlight its critical role on house price analyses. 相似文献
Low density polyethylene (LDPE) is extruded, stretched, and photocrosslinked at different temperatures with different stretch rations in a continuous production line. Three different sequences are adopted: crosslinking before drawing, crosslinking after drawing, and crosslinking during drawing. The effect of drawing is studied by measuring the tensile properties. The increase of tensile strength and the decrease of elongation at break after stretching are related to chain orientation in crystalline morphology measured by X-ray diffraction. Thermal analysis by differential scanning calorimetry (DSC) supports these results. Owing to chain relaxation, the effects of orientation by stretching are significant only when the samples are drawn at a temperature not much higher than the melting point. Annealing of the drawn samples at a temperature above the melting point shows that the orientation in a crosslinked sample is retained for a much longer time than in an uncrosslinked sample. For the crosslinked samples, it is found that crosslinking after or during drawing gives a material with lower shrinkage upon heating; however, crosslinking before drawing gives a heat-shrinkable material. 相似文献