Exploiting 2D compressed sensing and information entropy for secure color image compression and encryption

Neural Computing and Applications - Compared to 1D compressed sensing (CS), 2D CS is more efficient for compressing the plaintext image from two directions, but security level of current 2D...     

有源电光调制式高功率瞬态电场传感器的研制

瞬态电场防护及应用技术的研究离不开瞬态电场测试系统;文中基于有源电光调制法,研制了一种高功率瞬态电场传感器;通过建立该传感器的等效电路模型,并借助CST仿真建模,分别从频域和时域角度分析了传感器的接收特性,并得到了一致的结果;最后利用脉冲噪声模拟器和吉赫兹横电磁波小室对研制的传感器性能进行了测试;结果表明:接收天线为单极子天线,天线负载采用高阻时响应电压与被测电场场强成正比;研制的传感器带宽为10kHz～314MHz,可用于纳秒级高功率瞬态电场的时域测试。     

A novel adaptive cooperative location algorithm for wireless sensor networks

To overcome the disadvantages of the location algorithm based on received signal strength indication(RSSI) in the existing wireless sensor networks(WSNs),a novel adaptive cooperative location algorithm is proposed.To tolerate some minor errors in the information of node position,a reference anchor node is employed.On the other hand,Dixon method is used to remove the outliers of RSSI,the standard deviation threshold of RSSI and the learning model are put forward to reduce the ranging error of RSSI and improve the positioning precision effectively.Simulations are run to evaluate the performance of the algorithm.The results show that the proposed algorithm offers more precise location and better stability and robustness.     

一种制做三维牙——颌骨光弹性模型的新方法

本文提出一种用“整体浇注法”制做三维牙——颌骨光弹性模型的新方法,即用价格便宜的石膏做阴模,先制出与真实牙几何相似的牙光弹性模型和模拟牙周膜的乳胶套,将它们粘接好,然后将其放入颌骨石膏阴模的适当位置,浇入环氧树脂混合液,用“二次固化法”进行固化,即可制成三维牙——颌骨整体光弹性模型。此法能保证模型与实物的严格几何相似和牙周的边界条件相似,使实验精度大大提高且工艺简单、成本低。     

基于IPv6技术的网络家电控制电路设计

随着信息技术的发展,计算机网络越来越深入平时的生产生活中,家用电器网络化已经成为一种发展趋势。本文实现一种基于IPv6技术的家电网络控制电路的硬件设计。应用该方法设计的家电系统在智能化及网络化具有较好性能。     

企业无线网络架设与安全

通过对当前企业无线网络的需求分析,阐述了无线技术和无线网络的发展历史和过程,结合无线网络在家庭用户和企业间架设的不同特点,提出了针对企业用户的无线网络架设的解决方案,同时也阐明了安全问题的重要性。最后结合某公司无线网络架设实例,论述解决方案的设计、实现过程。     

塑性加工方法在粉末高温合金中的探索研究

采用塑性加工方法,本文初步探索了预变形对PREP高温合金粉末及热等静压后合金显微组织的影响.结果表明,粉末预变形可以促进热处理后粉末组织的均匀化,并可降低合金的再结晶温度,改善合金组织,消除部分枝晶,对提高粉末的利用率及降低粉末高温合金盘件的成本具有较大的实际意义.     

The Effects of Insulin-Like Growth Factor I and BTP-2 on Acute Lung Injury

Acute lung injury (ALI) afflicts approximately 200,000 patients annually and has a 40% mortality rate. The COVID-19 pandemic has massively increased the rate of ALI incidence. The pathogenesis of ALI involves tissue damage from invading microbes and, in severe cases, the overexpression of inflammatory cytokines such as tumor necrosis factor-α (TNF-α) and interleukin-1β (IL-1β). This study aimed to develop a therapy to normalize the excess production of inflammatory cytokines and promote tissue repair in the lipopolysaccharide (LPS)-induced ALI. Based on our previous studies, we tested the insulin-like growth factor I (IGF-I) and BTP-2 therapies. IGF-I was selected, because we and others have shown that elevated inflammatory cytokines suppress the expression of growth hormone receptors in the liver, leading to a decrease in the circulating IGF-I. IGF-I is a growth factor that increases vascular protection, enhances tissue repair, and decreases pro-inflammatory cytokines. It is also required to produce anti-inflammatory 1,25-dihydroxyvitamin D. BTP-2, an inhibitor of cytosolic calcium, was used to suppress the LPS-induced increase in cytosolic calcium, which otherwise leads to an increase in proinflammatory cytokines. We showed that LPS increased the expression of the primary inflammatory mediators such as toll like receptor-4 (TLR-4), IL-1β, interleukin-17 (IL-17), TNF-α, and interferon-γ (IFN-γ), which were normalized by the IGF-I + BTP-2 dual therapy in the lungs, along with improved vascular gene expression markers. The histologic lung injury score was markedly elevated by LPS and reduced to normal by the combination therapy. In conclusion, the LPS-induced increases in inflammatory cytokines, vascular injuries, and lung injuries were all improved by IGF-I + BTP-2 combination therapy.     

Adsorption Mechanism and Electrochemical Properties of Methyl Blue onto Magnetic CoxCu(1–x)Fe2O4 Nanoparticles Prepared via an Alcohol Solution of Nitrate Combustion and Calcination Process

Journal of Inorganic and Organometallic Polymers and Materials - Magnetic CoxCu(1–x)Fe2O4 nanoparticles were prepared via an alcohol solution of nitrate combustion and calcination process....