Practical Design Model for Calculating Bubble Diffuser Contactor Ozone Transfer Efficiency

Ozone transfer to water or wastewater is necessary before desirable, effective ozone reactions occur. Several factors affect ozone transfer efficiency, including water quality characteristics, contactor configuration, and applied ozone characteristics. The design model presented in this paper addresses all factors affecting ozone transfer. The model was used to compare measured transfer efficiency with predicted transfer efficiency at four full-scale wastewater ozone disinfection facilities. A relatively good prediction was obtained at each plant.

The paper presents an example calculation of ozone transfer efficiency. Also, the effect of changes to some of the factors affecting transfer efficiency is presented, such as changes in diffuser depth, plant elevation, ozone concentration, water quality (i.e., ozone demand), pH, detention time, temperature, and acombination of factors. The design model may be used to evaluate the effect of changes in plant design on transfer efficiency, but cannot provide an absolute value for transfer efficiency until difficult-to-measure parameters, such as bubble diameter, are known.     

Microstructure and creep behavior in AE42 magnesium die-casting alloy

The micro structural analysis of die-cast AE42 reveals a correlation between micro structure and creep strength. A lamellar-phase Al₁₁RE₃, which dominates the interdendritic microstructure of the alloy, partly decomposes above 150‡C into Al₂RE and Al (forming Mg₁₇Al₁₂). The increased solubility of aluminum in magnesium at higher temperatures may also promote the decomposition of Al₁₁RE₃. The creep strength decreases sharply with these phase changes. A mechanism for the decrease in creep strength of AE42 is proposed whereby the reduced presence of lamellar Al1₁₁RE₃ and/or the presence of Mg₁₇Al₁₂ contribute to the observed poor creep strength at higher temperatures.     

Categories of quantum and classical channels

We introduce a construction that turns a category of pure state spaces and operators into a category of observable algebras and superoperators. For example, it turns the category of finite-dimensional Hilbert spaces into the category of finite-dimensional C*-algebras and completely positive maps. In particular, the new category contains both quantum and classical channels, providing elegant abstract notions of preparation and measurement. We also consider nonstandard models that can be used to investigate which notions from algebraic quantum information theory are operationally justifiable.     

Introduction: In-Use,In-Situ: Extending Field Research Methods—Part 2

This study used protocol analyses and user drawings of their models of the system to investigate the “getting lost” problem in hypertext navigation. The “getting lost” problem is viewed as occurring when routine expectations of naive users, concerning appropriate linear sequences, are violated. Several ways in which users persistently attempt to work within a linear model, despite its inapplicability, are examined. The transition to more hierarchical user models is described.     

Evaluation of Nd:YAG-pumped Raman shifter as a broad-spectrum light source

We have examined the utility of a gas-filled, Nd:YAG-laser-pumped Raman shifter as a possible broad-spectrum light source. Six to nine new output frequencies with pulse energies above 1 μJ are produced when a pure-hydrogen or pure-methane Raman shifter is pumped with 40 mJ of secondharmonic, 20 mJ of third-harmonic, or 11 mJ of fourth-harmonic pump pulse energy. Optimum output occurs at pressures of approximately 10 atm for the pure-gas experiments. We also report the output frequencies and pulse energies of a mixed hydrogen-methane Raman shifter pumped by 20 mJ of the third harmonic of the laser for various proportions of the two gases at pressures up to nearly 20 atm. Depending on composition and pressure, over a dozen new output lines with pulse energies over 1 μJ can be produced. We discuss the nonlinear processes involved, the optimum operating conditions, and the suitability of the source for our application of groundwater monitoring.     

GEO_BUG: a geographical modelling environment for assessing the likelihood of pest development

This paper describes software designed to explore pest phenology (development) over space and time. The framework presented links sequences of interpolated daily maximum and minimum temperatures with a variety of process-based phenology and accumulated temperature models. The flexibility offered by this approach is demonstrated using examples of gridded maps of pest phenology on target dates, graphs of the sequences of pest development at individual locations and assessments of error in the predicted dates over the course of a model run. Finally, the potential application of the software in support of agricultural management systems, policy development and integrated research is discussed.     

A perspective on range finding techniques for computer vision

In recent times a great deal of interest has been shown, amongst the computer vision and robotics research community, in the acquisition of range data for supporting scene analysis leading to remote (noncontact) determination of configurations and space filling extents of three-dimensional object assemblages. This paper surveys a variety of approaches to generalized range finding and presents a perspective on their applicability and shortcomings in the context of computer vision studies.     

A Laser Time-of-Flight Range Scanner for Robotic Vision

The requirements of three-dimensional scene analysis in support of vision driven robotic manipulation are such that direct range finding capabilities can greatly reduce the computational burden (time and complexity) for reliable determination of the placement and spatial extent of objects in the scene. This paper describes a laser time-of-flight range scanner capable of acquiring a reasonable rangepic of 64 × 64 spatial resolution in 4 s. However, at the current state of development, 100 samples/point are required to achieve a range accuracy of approxi-mately ±? cm, with a scan time of 40 s. Returned signal amplitude de-pendency is also apparent in the range determination, the dynamic range of intensity being considerable. Improved accuracy can be traded for tine. The vision/robotics laboratory environment within which the range scanner operates is briefly touched upon and some preliminary rangepic results presented.     

Power spectrum and Allan variance methods for calibrating single-molecule video-tracking instruments

Single-molecule manipulation instruments, such as optical traps and magnetic tweezers, frequently use video tracking to measure the position of a force-generating probe. The instruments are calibrated by comparing the measured probe motion to a model of Brownian motion in a harmonic potential well; the results of calibration are estimates of the probe drag, α, and spring constant, κ. Here, we present both time- and frequency-domain methods to accurately and precisely extract α and κ from the probe trajectory. In the frequency domain, we discuss methods to estimate the power spectral density (PSD) from data (including windowing and blocking), and we derive an analytical formula for the PSD which accounts both for aliasing and the filtering intrinsic to video tracking. In the time domain, we focus on the Allan variance (AV): we present a theoretical equation for the AV relevant to typical single-molecule setups and discuss the optimal manner for computing the AV from experimental data using octave-sampled overlapping bins. We show that, when using maximum-likelihood methods to fit to the data, both the PSD and AV approaches can extract α and κ in an unbiased and low-error manner, though the AV approach is simpler and more robust.