Fabrication of highly porous titanium (Ti) scaffolds with two interlaced periodic pores

This paper reports a novel type of porous titanium (Ti) scaffolds with two interlaced periodic pores that were produced by coating the surfaces of a dual-channeled hydroxyapatite (HA) scaffold, as a supporting framework, with a titanium hydride (TiH₂) slurry followed by heat-treatment at 1200 °C for 3 h in a vacuum to convert TiH₂ to Ti metal. This method allowed the porous Ti scaffolds to mimic the original pore structure of the dual-channeled HA scaffold in a tightly controlled manner. It was observed that the Ti layer was strongly adhered to the HA layer, owing to the diffusion of P ions into the Ti layer. The fabricated sample showed a high compressive strength of 6.0 ± 0.77 MPa and a porosity of 78 vol.% due to its unique pore structure, as well as perfect interconnections between the pores.     

Templated synthesis of Ag loaded TiO2 nanostructures using amphiphilic polyelectrolyte

A graft-type amphiphilic polyelectrolyte, i.e. poly(vinylidene fluoride-co-chlorotrifluoroethylene)-g-poly(styrene sulfonic acid) (P(VDF-co-CTFE)-g-PSSA) with 47 wt.% of PSSA was synthesized via atom transfer radical polymerization (ATRP) and used as a template film for the in-situ formation of Ag nanoparticles. This nanocomposite material was further combined with titanium(IV) isopropoxide (TTIP) to form Ag loaded TiO₂ nanostructural hybrid materials. UV-visible spectroscopy, X-ray diffraction (XRD) and transmission electron microscope (TEM) revealed successful synthesis of Ag-TiO₂ nanostructures templated in the P(VDF-co-CTFE)-g-PSSA graft copolymer film. It was also found that the d-spacing of the graft copolymer in XRD patterns was increased from 4.1 to 4.4 Å, presumably due to the chain expansion resulting from the incorporation of nanoparticles in highly entangled polymeric chains.     

Highly porous titanium (Ti) scaffolds with bioactive microporous hydroxyapatite/TiO2 hybrid coating layer

Highly porous Ti scaffolds with a bioactive microporous hydroxyapatite (HA)/TiO₂ hybrid coating layer were fabricated using the sponge replication process and micro-arc oxidation (MAO) treatment to produce the porous Ti scaffold and hybrid coating layer, respectively. In particular, the morphology and chemical composition of the hybrid coating layer were controlled by carrying out the MAO treatment in electrolyte solutions containing various concentrations of HA, ranging from 0 to 30 wt.%. The fabricated sample showed high porosity of approximately 70 vol.% with interconnected pores and reasonably high compressive strength of 18 ± 0.3 MPa. Furthermore, the surfaces could be coated successfully with a bioactive microporous HA/TiO₂ hybrid layer. The amount of HA particles in the hybrid coating layer increased with increasing HA content in the electrolyte solution, while preserving the microporous morphology. This hybrid coating improved the osteoblastic activity of the porous Ti scaffolds significantly.     

Regaining lost time: Adult aging and the effect of time restoration on recall of time-compressed speech.

Two experiments in which time was restored to artificially accelerated (time-compressed) speech are reported. Experiment I showed that although both young and older adults' recall of the speech benefited from the restoration of time, time restoration failed to boost the older adults to their baseline levels for unaltered speech. In Experiment 2, either 100% or 125% of lost time was restored by inserting pauses, either at linguistic boundaries or at random points within the passages. Experiment 2 showed that the beneficial effects of time restoration depended on where processing time was inserted, as well as how much time was restored. Results are interpreted in terms of age-related slowing in speech processing moderated by preserved linguistic knowledge and short-term conceptual memory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Vascular effects of estrogen and cholesterol-lowering therapies in hypercholesterolemic postmenopausal women

BACKGROUND: Lipoproteins affect endothelium-dependent vasomotor responsiveness. Because lipoprotein effects of estrogen and cholesterol-lowering therapies differ, we studied the vascular responses to these therapies in hypercholesterolemic postmenopausal women. METHODS AND RESULTS: We randomly assigned 28 women to conjugated equine estrogen (CE) 0.625 mg, simvastatin 10 mg, and their combination daily for 6 weeks. Compared with respective baseline values, simvastatin alone and combined with CE reduced LDL cholesterol to a greater extent than CE alone (both P<0.05). CE alone and combined with simvastatin raised HDL cholesterol and lowered lipoprotein(a) to a greater extent than simvastatin alone (all P<0.05). Flow-mediated dilation of the brachial artery (by ultrasonography) improved (all P<0.001 versus baseline values) on CE (4.0+/-2.6% to 10.2+/-3.9%), simvastatin (4.3+/-2.4% to 10.0+/-3.9%), and CE combined with simvastatin (4.6+/-2.0% to 9.8+/-2.6%), but similarly among therapies (P=0.507 by ANOVA). None of the therapies improved the dilator response to nitroglycerin (all P>/=0.184). Only therapies including CE lowered levels of plasminogen activator inhibitor type 1 and the cell adhesion molecule E-selectin (all P<0. 05 versus simvastatin). CONCLUSIONS: Although estrogen and statin therapies have differing effects on lipoprotein levels, specific improvement in endothelium-dependent vasodilator responsiveness is similar. However, only therapies including estrogen improved markers of fibrinolysis and vascular inflammation. Thus, estrogen therapy appears to have unique properties that may benefit the vasculature of hypercholesterolemic postmenopausal women, even if they are already on cholesterol-lowering therapy.     

Low-cycle fatigue life of SiC-particulate-reinforced Al-Si cast alloy composites with tensile mean strain effects

The low-cycle fatigue behaviour of a SiC-particulate-reinforced Al-Si cast alloy with two different volume fractions has been investigated under strain-controlled conditions with and without tensile mean strains. The composites and the unreinforced matrix alloy showed cyclic hardening behaviour. The composite having a higher volume fraction of the SiC particles exhibited a more pronounced strain-hardening rate. For the tensile mean strain tests, the initial high tensile mean stress relaxed to zero for the ductile Al-Si alloy, resulting in no influence of the tensile mean strain on the fatigue life of the matrix alloy. However, tensile mean strain for the composite caused tensile mean stresses and reduced the fatigue life. The pronounced effects of mean strain on the low-cycle fatigue life of the composite compared to the unreinforced matrix alloy were attributed to the initial large prestrain causing non-relaxing high tensile mean stress in the composite with limited ductility and cyclic plasticity. Fatigue damage parameter using strain energy density accounted for the mean stress effects quite satisfactorily. Predicted fatigue life using this damage parameter correlated fairly well with the experimental life within a factor of 3. Moreover, the fatigue damage parameter indicated the inferior life in the low-cycle regime and superior life in the high-cycle regime for the composite, compared to the unreinforced matrix alloy.     

Surface properties and reactivity of Cu/γ-Al2O3 catalysts for NO reduction by C3H6: Influences of calcination temperatures and additives

The influences of calcination temperatures and additives for 10 wt.% Cu/γ-Al₂O₃ catalysts on the surface properties and reactivity for NO reduction by C₃H₆ in the presence of excess oxygen were investigated. The results of XRD and XPS show that the 10 wt.% Cu/γ-Al₂O₃ catalysts calcined below 973 K possess highly dispersed surface and bulk CuO phases. The 10 wt.% Cu/γ-Al₂O₃ and 10 wt.% Mn–10 wt.% Cu/γ-Al₂O₃ catalysts calcined at 1073 K possess a CuAl₂O₄ phase with a spinel-type structure. In addition, the 10 wt.% La–10 wt.% Cu/γ-Al₂O₃ catalyst calcined at 1073 K possesses a bulk CuO phase. The result of NO reduction by C₃H₆ shows that the CuAl₂O₄ is a more active phase than the highly dispersed and bulk CuO phase. However, the 10 wt.% Mn–10 wt.% Cu/γ-Al₂O₃ catalyst calcined at 1073 K possesses significantly lower reactivity for NO reduction than the 10 wt.% Cu/γ-Al₂O₃ catalyst calcined at 1073 K, although these catalysts possess the same CuAl₂O₄ phase. The low reactivity for NO reduction for 10 wt.% Mn–10 wt.% Cu/γ-Al₂O₃ catalyst calcined at 1073 K is attributed to the formation of less active CuAl₂O₄ phase with high aggregation and preferential promotion of C₃H₆ combustion to CO_x by MnO₂. The engine dynamometer test for NO reduction shows that the C₃H₆ is a more effective reducing agent for NO reduction than the C₂H₅OH. The maximum reactivity for NO reduction by C₃H₆ is reached when the NO/C₃H₆ ratio is one.     

pH control for dyeing polyamide in a reused acid dyebath

The pH control that can be achieved in a reused dyebath was investigated. The study involved a phosphate buffer system and four pH sliding systems, including ammonium sulphate and three hydrolysable organic esters. Instead of discharging the dyebath after each dyeing cycle, the residual dyebath was analysed using a UV-Vis spectrophotometer and reconstituted to the required concentration of dyes, auxiliaries and acid donors. The dyebath was reused for 10 cycles and colour reproducibility, levelness and fastness of the dyed samples were measured after each recycling. In comparison with ammonium sulphate and sodium dihydrogen phosphate, hydrolysable organic esters gave a stable and effective pH shifting in the dyebath reuse system. In addition, hydrolysable organic esters resulted in a very low amount of salt in residual dyebath. No deterioration in colour fastness of the dyed fabrics over 10 cycles of dyebath reuse was evident.     

Targeting MicroRNA-485-3p Blocks Alzheimer’s Disease Progression

Alzheimer’s disease (AD) is a form of dementia characterized by progressive memory decline and cognitive dysfunction. With only one FDA-approved therapy, effective treatment strategies for AD are urgently needed. In this study, we found that microRNA-485-3p (miR-485-3p) was overexpressed in the brain tissues, cerebrospinal fluid, and plasma of patients with AD, and its antisense oligonucleotide (ASO) reduced Aβ plaque accumulation, tau pathology development, neuroinflammation, and cognitive decline in a transgenic mouse model of AD. Mechanistically, miR-485-3p ASO enhanced Aβ clearance via CD36-mediated phagocytosis of Aβ in vitro and in vivo. Furthermore, miR-485-3p ASO administration reduced apoptosis, thereby effectively decreasing truncated tau levels. Moreover, miR-485-3p ASO treatment reduced secretion of proinflammatory cytokines, including IL-1β and TNF-α, and eventually relieved cognitive impairment. Collectively, our findings suggest that miR-485-3p is a useful biomarker of the inflammatory pathophysiology of AD and that miR-485-3p ASO represents a potential therapeutic candidate for managing AD pathology and cognitive decline.     

Surface modification of polytetrafluoroethylene by Ar+ irradiation for improved adhesion to other materials

A surface of thin square polytetrafluoroethylene (PTFE) samples (1 × 1 × 0.2 cm³) was irradiated with Ar⁺ at 1 keV with varying ion dose from 5 × 10¹⁴ to 1 × 10¹⁷ ions/cm² with and without an oxygen environment. The irradiated surface of the samples was examined by scanning electron microscopy (SEM) for surface textural changes and x-ray photoelectron spectrometry (XPS) for changes in chemical structure. A wettability test was conducted on the irradiated surface of PTFE samples by water droplets. A Scotch ™ tape adhesion test, after a thin film of Cu or Al was evaporated on the irradiated surface, and a tensile test after irradiated samples were glued to sample holders by an adhesive glue (Crystal Bond) was also run. The SEM micrographs showed increasing roughness with fiber forest-like texture with increasing ion dose. The Ar⁺ with an O₂ environment produced finer and denser fiber forest-like texture than that without O₂. The high-resolution XPS spectra showed decreased intensity of the F1s peak and formation of the O1s peak when irradiated with the O₂ environment. The increase of the O1s peak may be attributed to the reaction of oxygen atoms and the free radicals created by Ar⁺ bombardment. The wettability of water droplets on the irradiated surfaces was found to be inversely proportional to the surface roughness. Adhesion tests were conducted on 2000 Å thick Al or Cu film. Full detachment of the metal films was observed when PTFE samples were not modified. Partial detachment of the Al film occurred when PTFE was irradiated without the O₂ environment, regardless of ion dose. No detachment of the film occurred when PTFE was irradiated with the O₂ environment with the ion dose exceeding 1 × 10¹⁶ ions/cm². Partial detachment of Cu film was observed with or without the O₂ environment when the ion dose was 5 × 10¹⁴ ions/cm². No detachment occurred with or without the O₂ environment when the ion dose was 1 × 10¹⁵ ions/cm² or greater. The tensile test showed that adhesion of an adhesive cement (Crystal Bond) to the irradiated PTFE samples increased significantly with increasing ion dose up to 1 × 10¹⁶ ions/cm². Possible mechanisms for the improved adhesion are given. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1913–1921, 1997