Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

步进式加热炉炉温优化设定模型及软件开发

针对线材厂步进式加热炉实际工况，提出了基于经验规则的炉温优化设定模型和在线自学习获取知识的思想，并以炉温优化设定模型为核心，开发出加热炉计算机控制系统的优化运行软件。     

镀铜／镍聚丙烯腈纤维填充复合材料电磁波屏蔽性能的研究

研究了镀铜／镍的聚丙烯腈纤维填充ＡＢＳ树脂制得的复合材料的导电性及电磁波屏蔽性能，复合材料的导电性主要与导电纤维的填加量有关，导电纤维与基体树脂间的相容状况、复合加工时某些工艺条件等对复合材料的导电性也有较大的影响，电磁波屏蔽性能随导电纤维填加量的增加而提高，加入适当的偶联剂有助于改善和复合材料的电磁波屏蔽性能。     

Fundamental solutions for half plane with an oblique edge crack

An elastic half plane with an oblique edge crack is considered in this paper. A pair of concentrated forces or point dislocations is assumed to act at an arbitrary point in the half plane. The half plane with an edge crack is first mapped into a unit circle by a rational mapping function so that the following analysis can be carried out on the mapped plane analytically. Then the complex stress functions are derived by separating the whole problem into two parts; one is the principal part corresponding to the infinite plane acted on by concentrated forces or dislocations, the other is the holomorphic part, which can be determined by making use of the property of regularity of complex stress functions. The stress intensity factors of the crack can be calculated with different inclined angles of the crack, and the displacement and stress components at an arbitrary position in the half plane can be expressed explicitly.     

膨润土凝胶调剖剂XJF的研制及应用

介绍了调剖剂XJF的配方,讨论了影响调剖剂性能的配方因素(膨润土含量、HPAM溶液浓度、XJ用量及添加剂Fc的浓度),考察了封堵能力和应用范围,简介了在火烧山油田现场试验的结果。     

New queueing strategies employing service interval-based priority for real-time communications in atm networks

In this paper, we propose queueing strategies employing the service interval-based priority (sip) which can provide delay-bounded, and loss-free services, while maximizing bandwidth utilization in the atm network. We also describe a variation of the sip, the residual service interval-based priority (rsip) which can achieve almost full utilization by assigning priorities dynamically on the basis of the residual service interval. We store the realtime cells belonging to different connections in logically separated queues, and for each queue, we set a parameter called service interval, during which only one cell is allowed to be transmitted. The sip server takes and transmits the head-of-line (hol) cell of the queue which has the smallest service interval, while the rsip server selects the queue with the smallest residual service interval. When there is no eligible real-time cell, it transmits non-real-time cell, thus enabling a maximized bandwidth utilization. Employing the above queueing strategies, we analyze the delay characteristics deterministically with the leaky bucket bounded input traffic and then dimension the optimal service interval. In dimensioning the service interval and buffer space of each real-time service queue, we consider burstiness of traffic in conjunction with delay constraints, so that bandwidth utilization can get maximized. In addition, we consider the issues of protection from malicious users, average bandwidth utilization, and coupling between the delay bound and the bandwidth allocation granularity.     

双相位编码在数据通信中的应用

双相位码是数据串行通信和记录中使用的一种编码方法。在集散控制系统中使用的磁带机和飞行数据记录器中得到广泛应用。本文主要介绍双相位码的编码、译码原理及双相位码的特点;重点论述双相位码的编码和译码过程在微机上的实现。工程实践和实验表明,用微机实现双相位码的编码和译码过程是切实可行的。试用在TDC-2000集散控制系统中获得了圆满成功。     

Analysis of culture fluorescence by a fiber-optic sensor inNicotiana tabacum plant cell culture

The on-line sensing of viable cell weight in plant cell culture process is applied to analysis and control of process. The fiber-optic fluorescence sensor was constructed to measure the NADH-dependent fluorescence inNicotiana tabacum plant cell culture and the analysis of fluorescence signal was done to be correlated with the viable cell weight. The structured kinetic model for cell growth was proposed to estimate the theoretical viable cell weight. The dimensional analysis was proposed for the interpretation of fluorescence signal, in which the path length, the inner filter effect and the hydrodynamic conditions were considered as the key factors on fluorescence signal. The dimensional analysis and empirical correlation of fluorescence signal to viable cell weight was applied to the interpretation of the detected fluorescence signal during cultivation. The proposed interpretation of fluorescence signal using dimensional analysis was well correlated with the viable cell weight estimated by the structured kinetic model as well as by empirical correlation.     

桐油改性酚醛树脂的结构及固化过程的研究

通过桐油与苯酚在酸性催化剂存在下反应，然后再在碱性催化剂存在与甲醛反应制得了一种热固性桐油改性酚醛树脂。利用红外光谱，差示扫描量热法分析技术对改性树脂的结构及固化反应过程进行了研究。