Vertical dynamic interactions of poroelastic soils and embedded piles considering the effects of pile-soil radial deformations

The paper presents an analytical solution for the vertical dynamic interaction analysis of a poroelastic soil layer and an embedded pile with the consideration of pile-soil radial deformations. The soil is treated a three-dimensional porous continuum and described by the Boer’s poroelastic model, while the pile is treated as a two-dimensional rod with both radial and vertical deformations of which the equation of motion is derived by the Hamilton’s variational principle. Without the introduction of potential functions, first take the volumetric strain of soil skeleton and pore fluid pressure as intermediate variables to deal with the equations of motion for the soil and then use the separation of variables to solve the equations of motion for the soil and the pile. By imposing the boundary and continuity conditions of the pile-soil system, the dynamic impedance in frequency domain and the velocity response in time domain of the pile top are obtained. The present solution is then verified by comparing with the corresponding finite element model computation results and the existing solutions. The effects of the pile-soil parameters on the dynamic characteristic of the pile-soil system are also analyzed. Some significant conclusions are drawn, which can provide useful reference for related engineering practice.     

Spline interpolation with optimal frequency spectrum for vibration avoidance

A major source of inaccuracy in CNC machines is unwanted vibrations induced by the frequency spectra of reference motion trajectory. This paper presents a novel approach where instead of filtering techniques, axis motion commands are generated with optimal frequency spectra in the first place. Tangential feedrate profile is defined as parametric spline, and its frequency spectrum is optimized with respect to structural dynamics of the machine. The optimization problem is solved efficiently using Quadratic Programming. Experimental results confirm that proposed technique can greatly improve surface finish during machining spline tool-paths without sacrificing from cycle time and contouring performance.     

Sol–gel deposition of multiply doped thermographic phosphor coatings Al2O3:(Cr,M) (M = Dy,Tm) for wide range surface temperature measurement application

A promising method of measuring surface temperatures in harsh environments is the use of thermographic phosphor coatings. There, the surface temperature is evaluated from the phosphorescence decay lifetime following a pulsed laser or flash lamp light excitation. Depending on the used dopant, single doped M³⁺:α-Al₂O₃ (M = Cr, Dy, Tm) emit at 694 nm (Cr³⁺), 488 nm (Dy³⁺), 584 nm (Dy³⁺), and 459 nm (Tm³⁺), respectively. However, the accessible temperature range with a single dopant is limited: for the Cr³⁺-transition from 293 K up to 900 K, and for the Dy³⁺ and Tm³⁺-transitions both from 1073 K up to 1473 K. In the present study a new approach is followed to extend these limitations by co-doping two dopants using the sol–gel method and dip coating of α-Al₂O₃ thin films. For that application (Dy³⁺ + Cr³⁺) co-doped thin α-Al₂O₃ films and (Tm³⁺ + Cr³⁺) co-doped α-Al₂O₃ films with thicknesses of 4–6 μm were prepared, and the temperature-dependent luminescence properties (emission spectra and lifetimes) were analysed after pulsed laser excitation in the UV (355 nm). The phosphorescence lifetime as a function of temperature were measured between 293 K and 1473 K. A considerably extended range for surface temperature evaluation was established following this new approach by combining different dopants on the molecular level.     

Electromigration-Induced Plastic Deformation in Cu Interconnects: Effects on Current Density Exponent, <Emphasis Type="Italic">n</Emphasis>, and Implications for EM Reliability Assessment

While Black’s equation for electromigration (EM) in interconnects with n = 1 is rigorously based on the principles of electrotransport, n > 1 is more commonly observed empirically. This deviation is usually attributed to Joule heating. An alternative explanation is suggested by the recent discovery of EM plasticity. To examine this possibility, we have retested samples that had been previously subjected to a predamaging phase of high temperature and current densities to determine whether the loss of median time to failure (MTF) is retained. We find that the predamaged samples exhibit MTFs that are permanently reduced, which is a characteristic of EM plasticity.     

Parameter optimization in the X-ray fluorescent analysis of coal

A method for express analysis of coal is proposed. In this method, the error in determining the calcium content is minimized by selecting the optimal parameters of the X-ray fluorescent method.     

Design and evaluation of a mechanical nanomanufacturing system for nanomilling

This paper presents design and evaluation of a mechanical nanomanufacturing system for performing the nanomilling process. The nanomilling process uses a nanotool (an atomic force microscope probe tip) that is rotated at high speeds to fabricate three-dimensional (3D) nano-scale features on a sample surface. After explaining the kinematics of the two nanomilling process configurations, the nanomilling system, including the 3D piezoelectric actuator that rotates the nanotool, the nanopositioning stage that provides the feeding and depth motions, and the software program that controls the nanomilling motions are described. A measurement system is then constructed to measure the dynamic nanomilling motions. A compensation algorithm is developed to enable obtaining desired nanotool motions in the presence of frequency and amplitude-dependent nonlinearities of the 3D piezoelectric actuator. The nanomilling system is then evaluated directly by measuring the nanotool motions, and indirectly by assessing the accuracy of the fabricated nanoscale features. It was shown that the nanomilling system facilitates fabrication of complex nano-scale features with high accuracy through the high-stiffness nanotool assembly and high-frequency (compensated) nanotool motions.     

Effect of different chemical treatments of surface on the height of Al-<Emphasis Type="Italic">p</Emphasis>-SiGe and Au-<Emphasis Type="Italic">n</Emphasis>-SiGe barriers

The effect of different chemical treatments on the properties of Au-n-SiGe and Al-p-SiGe Schottky barriers has been investigated. Etching under different conditions was used to prepare surfaces with different densities of surface states (D _ss). It is shown that the barrier height in the structures under study correlates with the D _ss value and germanium content in the Si_{1 − x} Ge _x alloy.     

Online Signal Injection Through a Bus-Referenced Current Transformer

An online signal injection approach based on a special current transformer is proposed as part of a solution for improving the test setup of transfer function diagnostics of transformers. However, the method is general and applicable to many types of substation equipment, such as circuit breakers and transmission lines. The system allows a high-power, high-frequency test signal to be injected directly on a high-voltage bus of an energized system. Due to the self-contained nature of the injector, no external power supplies or signal generators are needed and the design does not need to be ground-referenced. The system can thus be at the bus potential. In conjunction with wireless communication for control, no isolator bushings are required and the device can be constructed as a sleeve to be mounted around the busbar. This allows for economical retrofitting to existing installations. In this paper, the operational need for such an injection device is discussed, followed by the theory behind the proposed concept. Finally, a low-voltage, optically controlled, self-powered prototype is designed and demonstrated online to show the practical validity of the concept.     

Multipath channel identification by using global optimization in ambiguity function domain

A new transform domain array signal processing technique is proposed for identification of multipath communication channels. The received array element outputs are transformed to delay-Doppler domain by using the cross-ambiguity function (CAF) for efficient exploitation of the delay-Doppler diversity of the multipath components. Clusters of multipath components can be identified by using a simple amplitude thresholding in the delay-Doppler domain. Particle swarm optimization (PSO) can be used to identify parameters of the multipath components in each cluster. The performance of the proposed PSO-CAF technique is compared with the space alternating generalized expectation maximization (SAGE) technique and with a recently proposed PSO based technique at various SNR levels. Simulation results clearly quantify the superior performance of the PSO-CAF technique over the alternative techniques at all practically significant SNR levels.