Free convective flow on a vertical plate with a constant heat flux in the presence of one or more steps

We carried out an experimental investigation of free convective heat transfer on a vertical plate subjected to a constant heat flux in the presence of one or several rectangular steps. Temperature fields were investigated with the help of a Mach-Zehnder interferometer. During the experiment the Rayleigh number changed from zero to Ra=2.8·10³. The flow was observed by the method of track visualization by means of a laser knife. Durectly behind a step we observed a circulating free convective flow having the shape of two oppositely rotating vortices.Academic Scientific Complex A. V. Luikov Heat and Mass Transfer Institute of the Academy of Sciences of Belarus, Minsk, Belarus. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 67, Nos. 3–4, pp. 190–196, September–October, 1994.     

Spline interpolation with optimal frequency spectrum for vibration avoidance

A major source of inaccuracy in CNC machines is unwanted vibrations induced by the frequency spectra of reference motion trajectory. This paper presents a novel approach where instead of filtering techniques, axis motion commands are generated with optimal frequency spectra in the first place. Tangential feedrate profile is defined as parametric spline, and its frequency spectrum is optimized with respect to structural dynamics of the machine. The optimization problem is solved efficiently using Quadratic Programming. Experimental results confirm that proposed technique can greatly improve surface finish during machining spline tool-paths without sacrificing from cycle time and contouring performance.     

Sol–gel deposition of multiply doped thermographic phosphor coatings Al2O3:(Cr,M) (M = Dy,Tm) for wide range surface temperature measurement application

A promising method of measuring surface temperatures in harsh environments is the use of thermographic phosphor coatings. There, the surface temperature is evaluated from the phosphorescence decay lifetime following a pulsed laser or flash lamp light excitation. Depending on the used dopant, single doped M³⁺:α-Al₂O₃ (M = Cr, Dy, Tm) emit at 694 nm (Cr³⁺), 488 nm (Dy³⁺), 584 nm (Dy³⁺), and 459 nm (Tm³⁺), respectively. However, the accessible temperature range with a single dopant is limited: for the Cr³⁺-transition from 293 K up to 900 K, and for the Dy³⁺ and Tm³⁺-transitions both from 1073 K up to 1473 K. In the present study a new approach is followed to extend these limitations by co-doping two dopants using the sol–gel method and dip coating of α-Al₂O₃ thin films. For that application (Dy³⁺ + Cr³⁺) co-doped thin α-Al₂O₃ films and (Tm³⁺ + Cr³⁺) co-doped α-Al₂O₃ films with thicknesses of 4–6 μm were prepared, and the temperature-dependent luminescence properties (emission spectra and lifetimes) were analysed after pulsed laser excitation in the UV (355 nm). The phosphorescence lifetime as a function of temperature were measured between 293 K and 1473 K. A considerably extended range for surface temperature evaluation was established following this new approach by combining different dopants on the molecular level.     

An industry experiment on the effects of test-driven development on external quality and productivity

Existing empirical studies on test-driven development (TDD) report different conclusions about its effects on quality and productivity. Very few of those studies are experiments conducted with software professionals in industry. We aim to analyse the effects of TDD on the external quality of the work done and the productivity of developers in an industrial setting. We conducted an experiment with 24 professionals from three different sites of a software organization. We chose a repeated-measures design, and asked subjects to implement TDD and incremental test last development (ITLD) in two simple tasks and a realistic application close to real-life complexity. To analyse our findings, we applied a repeated-measures general linear model procedure and a linear mixed effects procedure. We did not observe a statistical difference between the quality of the work done by subjects in both treatments. We observed that the subjects are more productive when they implement TDD on a simple task compared to ITLD, but the productivity drops significantly when applying TDD to a complex brownfield task. So, the task complexity significantly obscured the effect of TDD. Further evidence is necessary to conclude whether TDD is better or worse than ITLD in terms of external quality and productivity in an industrial setting. We found that experimental factors such as selection of tasks could dominate the findings in TDD studies.     

An approximate method for static and dynamic analyses of symmetric wall‐frame buildings

In this study an approximate method based on the continuum approach and transfer matrix method for static and dynamic analyses of symmetric wall‐frame buildings is presented. The whole structure is idealized as a sandwich beam in this method. Initially the differential equation of this equivalent sandwich beam is written; shape functions for each storey can then be obtained by the solution of differential equations. By using boundary conditions and storey transfer matrices obtained from these shape functions, system modes and periods can be calculated. The reliability of the study is shown using several examples. A computer program has been developed in MATLAB and numerical samples have been solved for demonstration of the reliability of this method. The results of the samples show the agreement between the present method and other methods given in the literature. Copyright © 2007 John Wiley & Sons, Ltd.     

Diffraction of acoustic waves by a semi-infinite cylindrical impedance pipe of certain wall thickness

An asymptotic high-frequency solution is presented for the problem of diffraction of acoustic waves emanating from a ring source by a semi-infinite cylindrical pipe of certain wall thickness having different internal, external and end surface impedances. Through the application of the Fourier-transform technique in conjunction with the Mode Matching method, the diffraction problem is described by a modified Wiener–Hopf equation of the second kind and then solved approximately. Various numerical results illustrating the effects of the parameters of the problem on the diffraction phenomenon are presented.     

Mechanical properties and repair bond strength of polymer-based CAD/CAM restorative materials

Information on the mechanical properties and repairability of computer-aided design/computer-aided manufacturing (CAD/CAM) blocks is scarce. Five CAD/CAM blocks with similar indications were evaluated, including four resin nanoceramics, one polymer-infiltrated ceramic network (PICN), and one feldspathic ceramic. CAD/CAM blocks were sectioned into 4 mm × 1.2 mm × 13 mm bars for flexural strength (FS), and 4 mm thick blocks were prepared for elastic modulus (EM), nanohardness (NH), and microshear bond strength (µSBS) testing. FS of the CAD/CAM blocks was determined using a three-point bending test, whereas EM and NH values were measured using a nanoindenter. The reparability of the tested block materials was determined by the µSBS test. One-way ANOVA was conducted for FS, EM, NH, and µSBS followed by Tukey's pairwise comparison (α < 0.05). FS ranged from 115 to 207 MPa, EM from 8.21 to 44 GPa, NH from 0.76 to 7.24, and µSBS from 24.9 to 30.6 MPa. The findings of the present study revealed that resin nanoceramic blocks exhibited higher FS values than PICN and feldspathic ceramic, and they have acceptable mechanical properties for the fabrication of single-unit restorations according to the ISO 6872:2008. Furthermore, all CAD/CAM blocks tested can be successfully repaired regarding their recommended repair protocol.