Comparison of different ultrasound support methods during colour and chemical oxygen demand removal of disperse and reactive dyebath solutions by ozonation

In this study, the effects of ozonation, ozonation with ultrasonic bath and ozonation with ultrasonic homogeniser processes on colour and chemical oxygen demand removal properties of disperse (CI Disperse Red 60, CI Disperse Blue 337) and reactive (CI Reactive Blue 171 and CI Reactive Blue 19) dyebath solutions with and without dyeing auxiliaries were investigated. Chemical oxygen demand (in mg/l) and colour (in Hazen) measurements of the studied dyebath solutions were determined. The ozonation process caused simultaneous chemical oxygen demand removal during decolorisation. However, the improvement in chemical oxygen demand reduction was less than of that on decolorisation. The application of the combination of ozonation with ultrasonic homogeniser is the most efficient process and creates a great time advantage over the other process types studied (ozonation alone and ozonation with ultrasonic bath) to reach the same colour and levels of chemical oxygen demand removal.     

Macroanatomic,light and scanning electron microscopic studies of the pecten oculi in the stork (Ciconia ciconia)

This study was undertaken to investigate the pecten oculi of stork by using macroscopic, light and electron microscopic techniques. A total of 20 eyes that were obtained from 10 storks were used. The eyes were cleaned and isolated by dissection. After various procedures, four of the pecten oculi were examined by light microscope while the other four with an electron microscope. The remaining 12 eyes were assigned for macroscopic investigation. Pecten oculi of the stork were determined as accordion‐like structures that originated from n. opticus, consisting of 15–17 plica and projecting up to 2/5 of the diameter of the bulbus oculi. Light microscopic examination revealed two types of blood vessels. Afferent–efferent vessels were larger in diamater (40–45 µm), fewer in numbers, and the capillary vessels were smaller in diamater (2–5 µm) and more in numbers. There were granules including amount of melanin pigment at the apical part of the pleats. These granules were fewer and scattered randomly on the basal part of the pleats. As a result, pecten oculi in the stork, which is a migrating bird, were determined to be similar to those of other diurnal birds. Microsc. Res. Tech. 76:963–967, 2013. © 2013 Wiley Periodicals, Inc.     

A water-soluble Irgacure 2959-based diallylammonium salt system for antibacterial coatings

A water-soluble mixture of a novel diallylammonium salt photoinitiator based on 2-hydroxy-1-[4-(2-hydroxyethoxy) phenyl]-2-methyl-1-propanone (Irgacure 2959 or I2959) and diallylammonium tosylate has been prepared. It shows excellent water-solubility of 6.8 wt% in water, much greater than the solubility of I2959 (<2 wt%). It has a strong absorbance at 269 nm (ε ~ 15731) in methanol. It exhibits 15.6 times higher migration stability than I2959 due to its monomeric nature. Its photoinitiating efficiency of 2-hydroxyethylmethacrylate (HEMA) and poly(ethylene glycol) diacrylate (PEGDA, M_n = 575 D) was found to be similar to I2959. PEGDA hydrogels prepared using the synthesized photoinitiator (PI) were found to have highly porous structures (15.44 μm) compared with those using I2959. PEGDA film prepared using this PI has demonstrated antibacterial properties against gram-negative Pseudomonas aeruginosa (ATCC 15442) and gram-positive Staphylococcus aureus (ATCC 23235) bacterial species.     

Situational Awareness in Construction and Facility Management

Engineers and managers involved in construction and facility/infrastructure operations need situational awareness about the as-is conditions when making daily decisions and developing short- and long-term plans. Yet, currently situational awareness of engineers is often challenged due to missing data and the available data not being in a format that is easily accessible and actionable. Advances in reality capture technologies, such as 3-dimensional (3D) imaging, in-situ sensing, equipment on-board instrumentation and electronic tagging, streamline the capturing of the as-is conditions on job sites. The data collected from these technologies, integrated with building information models depicting the as-planned conditions, can help in creating and storing the history of as-is conditions of a facility to support a variety of decisions that engineers and managers need to make. While the opportunities associated with integrating building information models and data capture technologies are compelling, several challenges need to be addressed through research for effective usage of these technologies. Such challenges include assessing the accuracy of the data collected at the field, developing and evaluating data processing and data fusion approaches, formalizing integrated representation of building information models and sensor and other relevant data, and investigating and developing approaches for analyzing and visualizing such integrated information models. This paper provides examples of recent research studies done at the Civil and Environmental Engineering Department at Carnegie Mellon University that demonstrate opportunities associated with integrating building information models and sensor information for facility operations.     

The effects of Co/Ce loading ratio and reaction conditions on CDRM performance of CoCe/ZrO2 catalysts

This work mainly aims to establish a link between Co/Ce loading ratio in CoCe/ZrO₂ catalysts and their Carbon Dioxide Reforming of Methane (CDRM) performance. In this context, catalysts with different Co and Ce loadings were prepared and characterized via BET, XRD, HRTEM-EDX, XPS and Raman, and parametrically tested under different CDRM conditions. Dispersion of Co particles was nonhomogeneous on all samples. For the sample with the highest Co/Ce ratio (10%Co2%Ce/ZrO₂), higher amount of lattice oxygen vacancies and lowest degree of ceria reduction were determined. Raman analysis showed that graphitic carbon coexisted with amorphous carbon on the surface of all spent samples. The extent of side reactions prevailed in determining selectivity. It was expressed that both CoCe synergistic interaction and synchronous contribution of Ce and ZrO₂ were enhanced for the samples having lower Co/Ce ratio. It was confirmed that Ce is only responsible for oxygen transfer but not its formation.     

Reducing the quantity of reworked parts in a robotic arc welding process

Today, the competitive environment of the knowledge age has been replaced with the competitive environment of the industrial age as the rules of the business world are changing completely. The focused issue is to reach to the knowledge as soon as possible, and to process and apply it rapidly. In this context, one of the important goals that the companies try to reach in order to achieve acceleration is the six sigma philosophy. Six sigma is a fundamental continuous improvement methodology aimed at reducing the variation and waste on processes by utilizing statistical methods and techniques efficiently. Global companies are making noteworthy profits by using this method in their processes. The six sigma methodology focuses on process excellence advantages for companies that apply it, to reach profit, to increase productivity and to have larger market share. In this paper, an application of six sigma methodology for reducing the quantity of rework parts for robotic arc welding process is given. The phases of six sigma and their results are indicated in detail. Furthermore, it is also shown how various techniques of six sigma methodology are applied to achieve financial benefits. Copyright © 2008 John Wiley & Sons, Ltd.     

Application of Mid-infrared Spectroscopy for the Measurement of Several Quality Parameters of Alcoholic Beverages, Wine and Raki

Mid-infrared (IR) spectroscopy, which is a rapid and relatively small amount of waste producing technique, was used to predict several quality parameters of two types of alcoholic beverages, wine and raki. Mid-infrared spectra of red, rose and white wines and a traditional aniseed alcoholic beverage, raki were collected and relations were established between measured chemical parameters (pH, brix, total phenol content, anthocyanin content, titratable acidity, sugar content, electrical conductivity and some colour parameters) of these beverages and their infrared spectra using chemometric techniques. Partial least square regression provided excellent prediction of total phenol (R ²?=?0.97) and anthocyanin contents (R ²?=?0.98) of wine samples and a good prediction of pH (R ²?=?0.9), brix (R ²?=?0.92) and colour intensity (R ²?=?0.93) values were obtained. Brix, total phenol and sugar content of raki samples were also estimated very successfully (R ²?=?0.99) for raki and good prediction was obtained with pH value. Mid-IR spectroscopy in combination with chemometrics could be a promising technique for determination of several quality parameters of alcoholic beverages simultaneously and rapidly.     

Co-delivery of pemetrexed and miR-21 antisense oligonucleotide by lipid-polymer hybrid nanoparticles and effects on glioblastoma cells

Abstract

Combination therapy using anticancer drugs and nucleic acid is a more promising strategy to overcome multidrug resistance in cancer and to enhance apoptosis. In this study, lipid-polymer hybrid nanoparticles (LPNs), which contain both pemetrexed and miR-21 antisense oligonucleotide (anti-miR-21), have been developed for treatment of glioblastoma, the most aggressive type of brain tumor. Prepared LPNs have been well characterized by particle size distribution and zeta potential measurements, determination of encapsulation efficiency, and in vitro release experiments. Morphology of LPNs was determined by transmission electron microscopy. LPNs had a hydrodynamic size below 100?nm and exhibited sustained release of pemetrexed up to 10?h. Encapsulation of pemetrexed in LPNs increased cellular uptake from 6% to 78%. Results of confocal microscopy analysis have shown that co-delivery of anti-miR-21 significantly improved accumulation of LPNs in the nucleus of U87MG cells. Nevertheless, more effective cytotoxicity results could not be obtained due to low concentration of anti-miR-21, loaded in LPNs. We expect that the effective drug delivery systems can be obtained with higher concentration of anti-miR-21 for the treatment of glioblastoma.