FMR and EXAFS modeling of heat-treated Fe-rich and Co-rich TM-M thin films

Ion-beam sputter-deposited alloy films of Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ and Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ were examined for their magnetic and structural properties. Films were characterized by ferromagnetic resonance, vibrating sample magnetometry, and extended X-ray absorption fine structure (EXAFS) analysis. Using atomic parameters deduced from EXAFS modeling and fitting procedures, magnetic properties were calculated with no adjustable parameters. Correlation between perpendicular FMR measurements and EXAFS first-shell modeling suggests a low-temperature formation of cobalt-borides in the Co/sub 74/Fe/sub 6/B/sub 15/Si/sub 5/ alloy. Annealed Fe/sub 75/Ni/sub 5/B/sub 15/Si/sub 5/ samples did not display evidence of structural and/or magnetic instabilities until the onset of long-range crystallization near T/sub ann/=400 degrees C.<>     

Slowly moving hull forms in short waves

The purpose of this paper is to provide a mathematical tool to improve the optimal design of ship forms. It is common practice that hull forms are designed such that they have minimum wave resistance in calm water. In this paper a theory is described by which the effect of short waves may be incorporated.The basic tool we use is the ray theory. First, the appropriate free-surface condition is shown. Then, the standard ray method, well-known in geometric optics, is formulated in the fluid region and at the free surface. After an elimination process the eiconal equation and the transport equation are obtained. The characteristic equation for the nonlinear eiconal equation is derived, keeping in mind that the characteristics are not perpendicular to the wave fronts, due to the effect of the double-body potential due to the forward speed of the ship, which is assumed to be a good approximation for the steady potential.Numerical computations are carried out by means of the RK4 method to obtain the ray pattern. After some manipulations the amplitude may be computed just as well. Finally, the nonlinear added-resistance force is calculated. Pictures of ray patterns for several angles of incidence are shown. Also the forces are shown.     

Use of rheology, dielectric analysis and differential scanning calorimetry for gel time determination of a thermoset

Measurements of gel time of the epoxy system DGEBA(n=0)/m-XDA were carried out using rheometry and dielectric analysis with the objective of checking the validity of Mangion-Johari equation (DEA) and Harran-Laudouard criterium (rheometry) for gel time determination. In this work, gel times obtained by rheometry and dielectric analysis are compared and conversions at gel time calculated. From the experimental results obtained for gel times it was found a reasonable agreement between the two techniques that lead to gel conversion values very close to those obtained using Flory equation.     

Comparison between photocatalytic ozonation and other oxidation processes for the removal of phenols from water

Photocatalytic ozonation (1O₃ + VUV + TiO₂), ozonation (O₃), catalytic ozonation (O₃ + TiO₂), ozone photolysis (O₃ + VUV), photocatalysis (TiO₂ + VUV) and photolysis (VUV) have been compared in terms of formation of intermediates, extent of, mineralization (TOC, COD, chloride, nitrate) and kinetics in the aqueous treatment of three phenols (phenol, p‐chlorophenol and p‐nitrophenol). In all cases, photocatalytic ozonation led to lower degradation times for chemical oxygen demand and total organic carbon removal. Intermediates formed were similar in the different oxidation systems with some exceptions. They can be classified into three different types: polyphenols (resorcinol, catechol, hydroquinone), unsaturated carboxylic acids (maleic and fumaric acids) and saturated carboxylic acids (glyoxylic, formic and oxalic acids). First order kinetic equations have been checked for the oxidation processes studied in the case of the parent compound. Rate constants of these systems have also been calculated. Copyright © 2005 Society of Chemical Industry     

Towards real CAD

Present-day computer-aided design (CAD) packages play only a small part in the area of mechanical engineering design, which involves the synthesis and embodiment of physical components to perform a pre-determined function without unwanted side effects. The computer cannot properly help the designer in this task until it is able to capture and process the function requirements of the design. This paper describes the computer system being developed for this purpose at the Engineering Design Centre at Cambridge University Engineering Department. The paper also explores some of the geometrical and programming implications raised.     

Modelling and analysis of 3-D arrangements of particles by point processes with examples of application to biological data obtained by confocal scanning light microscopy

Within the concept of point processes, a review is presented of quantities which can be used in studies of three-dimensional (3-D) aggregates of particles. Suitable characteristics and estimators are given for both unmarked and marked point processes. To demonstrate the feasibility of such quantitative approaches, an application in histology, dealing with 3-D arrangements of cell nuclei in rat liver, is described. Using a confocal scanning light microscope, 3-D images are recorded and image analysis used to obtain the coordinates of the centroid, together with the volume and DNA content, of each cell nucleus. Examples of results are given, using both unmarked and marked point processes. In the latter case, cell type, nuclear volume and ploidy group are suitable marks.     

Empirical equations for the perforation of mild steel plates

The experimental results for the perforation energy of mild steel plate struck by flat-ended, non-deforming, cylindrical penetrators have been correlated using the principles of dimensional analysis. A correlation is presented for long penetrators. It is shown that for short penetrators a different response of the target is observed and that, at present, there are insufficient published data to produce a unifying correlation.     

Optimal power control for Rayleigh-faded multiuser systems with outage constraints

How can we achieve the conflicting goals of reduced transmission power and increased capacity in a wireless network, without attempting to follow the instantaneous state of a fading channel? In this paper, we address this problem by jointly considering power control and multiuser detection (MUD) with outage-probability constraints in a Rayleigh fast-fading environment. The resulting power-control algorithms (PCAs) utilize the statistics of the channel and operate on a much slower timescale than traditional schemes. We propose an optimal iterative solution that is conceptually simple and finds the minimum sum power of all users while meeting their outage targets. Using a derived bound on outage probability, we introduce a mapping from outage to average signal-to-interference ratio (SIR) constraints. This allows us to propose a suboptimal iterative scheme that is a variation of an existing solution to a joint power control and MUD problem involving SIR constraints. We further use a recent result that transforms complex SIR expressions into a compact and decoupled form, to develop a noniterative and computationally inexpensive PCA for large systems of users. Simulation results are presented showing the closeness of the optimal and mapped schemes, speed of convergence, and performance comparisons.