Pilot mental workload: how well do pilots really perform?

The purpose of this study was to investigate the effects of increasing mental demands on various aspects of aircrew performance. In particular, the robustness of the prioritization and allocation hierarchy of aviate-navigate-communicate was examined, a hierarchy commonly used within the aviation industry. A total of 42 trainee pilots were divided into three workload groups (low, medium, high) to complete a desktop, computer-based exercise that simulated combinations of generic flight deck activities: flight control manipulation, rule-based actions and higher level cognitive processing, in addition to Air Traffic Control instructions that varied in length from one chunk of auditory information to seven chunks. It was found that as mental workload and auditory input increased, participants experienced considerable difficulty in carrying out the primary manipulation task. A similar decline in prioritization was also observed. Moreover, when pilots were under a high mental workload their ability to comprehend more than two chunks of auditory data deteriorated rapidly.     

Geometry-dependent lighting

In this paper, we introduce geometry-dependent lighting that allows lighting parameters to be defined independently and possibly discrepantly over an object or scene based on the local geometry. We present and discuss light collages, a lighting design system with geometry-dependent lights for effective feature-enhanced visualization. Our algorithm segments the objects into local surface patches and places lights that are locally consistent but globally discrepant to enhance the perception of shape. We use spherical harmonics for efficiently storing and computing light placement and assignment. We also outline a method to find the minimal number of light sources sufficient to illuminate an object well with our globally discrepant lighting approach.     

Treatment of domestic sewage by a metal membrane bioreactor

A submerged flat metal MBR (membrane bioreactor) was used to treat synthetic domestic sewage in this study. The experiment was continued for 270 days and ran under two modes as AMBR (aerobic membrane bioreactor) and A/O-MBR (anoxic/aerobic membrane bioreactor) at a permeate flux of 0.4-1 m3/(m2 d). PVA (polyvinyl alcohol) gel beads were added to the aeration tank with a volume ratio of 10% at the end of the A/O-MBR mode. The mean COD and TN removal efficiencies achieved 96.69 and 32.12% under the AMBR mode, and those were 92.17 and 72.44% under the A/O-MBR mode, respectively. SND (simultaneous nitrification and denitrification) occurred at high MLSS (mixed liquor suspended solids) concentration. The metal membranes reduced effluent COD during filtration. The system ran stably for 115 days at a permeate flux of 0.8-1 m3/(m2 d) without changing membranes under the AMBR mode, but the membrane filterability decreased gradually under high MLSS or A/O-MBR mode, and the addition of PVA worsened the membrane filterability on the contrary. PSD (particle size distribution) and sludge fractions had evident influence on membrane fouling. The main fouling mechanism was cake formation under the AMBR mode, and that was pore blocking under the A/O-MBR mode.     

Vessel motion thresholds for maintaining physical and cognitive performance: a study of naval personnel at sea

Methods and results are reported from a study of ships companies' exposure to low-frequency motions on three vessels of the Royal Navy. The aim of the study was to investigate relationships between deck accelerations and the incidence of problems such as difficulties with physical tasks, cognitive activities, motion sickness, and work effort. Ship motions were recorded continuously during sea patrols of 10-14 days. The data collected from the three vessels comprised 105 days of ship motions over 12 patrols, with 779 associated daily diaries from 78 participants. Problems most strongly associated with vessel motions were related to the difficulties with physical tasks. Some cognitive aspects of task performance and motion sickness were associated with vertical acceleration magnitudes, but the correlations were less strong than with physical tasks. Practitioner Summary: Little is known about the severity of ship motions that degrade physical and mental performance. The paper offers preliminary estimates of the motion threshold values below which the performance will not be degraded by motion.     

Three-dimensional tracking and temporal analysis of liposomal transport in live cells using bright-field imaging

Gold nanoparticles (AuNPs) confined in liposomes of diameters around 200 nm produce strong scattering signal owing to surface plasmon resonance, and therefore bright-field optical tracking of the AuNP-encapsulating liposomes can be conducted in living cells. Using an optical profiling technique called noninterferometric wide-field optical profilometry and a bright-field tracking algorithm, the polynomial-fit Gaussian weight method, we analyze three-dimensional (3D) motion of such liposomes in living fibroblasts. The positioning accuracy in three dimensions is nearly 20 nm. We tag the liposome membranes with fibroblast growth factor-1 and reveal the intracellular transportation processes toward or away from the nucleus. On the basis of a temporal analysis of the intracellular 3D trajectories of AuNP-encapsulating liposomes, we identify directed and diffusive motions in the transportation processes.     

Note: He puff system for dust detector upgrade

Local detection of surface dust is needed for the safe operation of next-step magnetic fusion devices such as ITER. An electrostatic dust detector, based on a grid of interlocking circuit traces biased to 50 V, has been developed to detect dust on remote surfaces and was successfully tested for the first time on the National Spherical Torus Experiment. In this note, we report a helium puff system that clears residual dust from this detector and any incident debris or fibers that might cause a permanent short circuit. Two consecutive helium puffs delivered by three 0.45 mm nozzles at an angle of 30° cleared the entire 5 cm × 5 cm surface of the detector.     

Emergence and characterization of foodborne methicillin-resistant Staphylococcus aureus in Korea

A total of 165 Staphylococcus aureus strains, isolated from different food samples between 2003 and 2006, were tested for antimicrobial susceptibility. The mecA-positive methicillin-resistant S. aureus (MRSA) strains were further characterized by testing for various virulence genes and by molecular typing with multilocus sequence typing and pulsed-field gel electrophoresis. Of the 165 S. aureus isolates, 150 strains (90.9%) were resistant to at least one antibiotic while no strain was resistant to vancomycin. Four strains were resistant to both oxacillin and cefoxitin and were mecA positive. The mecA-positive MRSA strains were isolated from raw meat and fish samples (two beef samples and two fish samples) and were resistant to β-lactam antibiotics. Based on multilocus sequence typing analysis, the isolates were assigned to sequence type 1 (ST1), ST72, and an undetermined ST (ST72 slv). All four MRSA isolates were shown to be enterotoxigenic. The ST1 MRSA isolate harbored the sea-seh gene combination and the ST72 and ST72 slv MRSA strains harbored the seg-sei and the sea-seg-sei gene combinations, respectively. However, none of the MRSA isolates had the genes for Panton-Valentine leukocidin, toxic shock syndrome toxin 1, and exfoliative toxins. The pulsed-field gel electrophoresis patterns of the ST72 isolates in our study were highly similar, even though they were isolated from food samples in different years and from different regions of Korea.     

Isomers of dechlorane plus in Lake Winnipeg and Lake Ontario food webs

The extent of bioaccumulation of the syn- and anti-isomers of Dechlorane Plus (DP) is assessed in archived food web samples from Lake Winnipeg and Lake Ontario. Concentrations of the isomers were determined using purified analytical solutions of individual isomers as opposed to the technical mixture. The syn-isomer was consistently detected in all samples from both lakes; the anti-isomer was detected in all Lake Ontario samples, but only 45% of the samples from Lake Winnipeg. The pattern of bioaccumulation was different for the isomers in Lake Winnipeg. The anti-isomer was dominant in higher trophic level (TL) organisms like walleye [arithmetic mean +/- 1 x standard error: 730 +/- 120 pg/g, lipid weight (1w)] and goldeye (760 +/- 170 pg/g, Iw) while the syn-isomer dominated the lower TL organisms like zooplankton (550 +/- 40 pg/g, Iw) and mussels (430 +/- 140 pg/g, Iw). In Lake Ontario, the extent of bioaccumulation of the isomers and concentrations was greatest in the lower TL benthic organism, Diporeia (syn, 1307 +/- 554; and anti, 3108 +/- 898 pg/g Iw) and also high in zooplankton (syn, 719; and anti, 1332 pg/g Iw). This suggests that the isomers are bioavailable in sediment and that, despite their molecular size, diffusion from the water column into zooplankton can occur. Differences in the mean fractional abundance of the anti-isomer (mean fanti = mean concentration of the anti-isomer divided by sum of mean syn- and anti-concentrations) were pronounced in sediments between lakes (Lake Winnipeg mean fanti = 0.610, Lake Ontario mean fanti = 0.860) and the extent of enrichment (anti-) and depletion (syn-) of the isomers were more marked in Lake Winnipeg biota. There were also differences in the biomagnification potentials, as measured bythe trophic magnification factor (TMF), between the isomers in the Lake Winnipeg food web; no statistically significant TMFs for either isomer were found for the     

Source apportionment of PAH in Hamilton Harbour suspended sediments: comparison of two factor analysis methods

A total of 26 suspended sediment samples collected over a 5-year period in Hamilton Harbour, Ontario, Canada and surrounding creeks were analyzed for a suite of polycyclic aromatic hydrocarbons and sulfur heterocycles. Hamilton Harbour sediments contain relatively high levels of polycyclic aromatic compounds and heavy metals due to emissions from industrial and mobile sources. Two receptor modeling methods using factor analyses were compared to determine the profiles and relative contributions of pollution sources to the harbor; these methods are principal component analyses (PCA) with multiple linear regression analysis (MLR) and positive matrix factorization (PMF). Both methods identified four factors and gave excellent correlation coefficients between predicted and measured levels of 25 aromatic compounds; both methods predicted similar contributions from coal tar/coal combustion sources to the harbor (19 and 26%, respectively). One PCA factor was identified as contributions from vehicular emissions (61%); PMF was able to differentiate vehicular emissions into two factors, one attributed to gasoline emissions sources (28%) and the other to diesel emissions sources (24%). Overall, PMF afforded better source identification than PCA with MLR. This work constitutes one of the few examples of the application of PMF to the source apportionment of sediments; the addition of sulfur heterocycles to the analyte list greatly aided in the source identification process.