三维Fuzzy数字拓扑及应用(Ⅰ)

本文引入L-,l-连通度的概念,把Rosenfeld等人建立的三维数字拓扑模糊化;并在三维地震处理中找到了它的应用模型.     

TEM study of PLZT ceramics

The microscopic structures of PLZT(7.9/70/30 and x/65/35, x = 7 or 8) ceramics were studied by means of transmission electron microscopy. The presence of micro-regions in PLZTs was first verfied.     

An empirical formula for the prediction of rain attenuation infrequency range 0.6 - 100 GHz

An empirical formula for calculating the extinction cross section (ECS) by raindrops over a broad frequency range is first derived based on extensive calculations made on a widely varying in mean radius of modified Pruppacher and Pitter (MPP) raindrop models ranging from 0.25 to 3.5 mm. The expansion coefficients in the empirical formula are determined by least-squares curve fitting of numerical data obtained by the volume integral equation formulation (VIEF). The formula satisfies the frequency and raindrop size dependence. Numerical results obtained from the empirical formula for calculating the ECS are generally in good agreement with those calculated by the VIEF for raindrops with mean radius varying from 0.25 to 3.5 mm in the frequency range from 0.6 to 100 GHz. The average error in the ECS is less than 10%. The formula thus provides a simple and inexpensive method for calculating the ECS of raindrops, which otherwise requires complicated and expensive methods of calculation. By implementing this empirical formula of ECS into the rain attenuation equation, a new numerically empirical formula for calculating the specific rain attenuation is also proposed. The validity of the empirical formula for calculating the specific rain attenuation is also checked by comparing the obtained results of specific rain attenuation with those obtained from Li et al.'s (1995) solution, Yeo et al.'s (1993) measurement, and Olsen et al.'s (1978) power-law equation     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000     

秦山核电厂气载放射性释放的环境影响

本文评价了秦山核电厂气载放射性流出物对环境的影响。应用现场及风洞大气扩释实验结果和厂址周围的人口与食谱调查资料,估算了秦山核电厂在正常运行和事故条件下释放的气载放射性流出物对公众产生的个人有效剂量当量和集体有效剂量当量。计算结果表明,正常运行时厂址边界(0.5km)处的最大个人有效剂量当量为2.7×10~(-2)mSv/a,该剂量的大部分来自~(137)Cs 的食入(主要由地表湿沉积引起);80km 范围内的集体有效剂量当量为1.1人·Sv/a,归一化集体有效剂量当量为3.7人·Sv/GW(e)·a。文中还给出了事故情况下剂量估算结果。     

Direct analysis of transient stability: Experience with the Taipower system

A direct method for transient stability analysis of a multimachine power system is presented. Emphasis is placed on the detailed development and evaluation of the proposed method in transient stability assessment. An energy-type Lyapunov function, taking into account the effect of transfer conductance, is introduced first. The potential energy boundary surface method is then adopted to determine the critical energy value quickly. The main computational burden in the direct method lies in the reduction of the admittance matrices. In this paper, an efficient reduction technique incorporating the sparsity technique and compensation theory is developed. Finally, the proposed method was tested on the Taipower system, which is the only power system in Taiwan. The results obtained confirm the validity and accuracy of the proposed method, and hence demonstrate the superiority and potential of the direct method in real power system applications.     

FM subcarrier fiber optical transmission system design and itsapplication in next-generation wireless access

This paper presents a design method of optical frequency modulation (FM) subcarrier (with super carrier) transmission modem. The nonideal link characteristics, including laser chirping, fiber dispersion, voltage controlled oscillator (VCO) phase noise, relative intensity noise (RIN), and equivalent network model of laser diode of such a system that may bring about signal distortion are discussed first. We then propose a hierarchical methods to establish the system equivalent model. Finally this FM modem is applied to a GSM wireless system, in which multichannel signals are transmitted over fiber between radio port and basestation, and system performance is appraised by its dynamic range. It is found that optical FM subcarrier (with super carrier) transmission technique can improve the system dynamic range, compared with the intensity modulated direct detection (IMDD) method, and this is a economical and efficient method     

Design optimization with static and dynamic displacement constraints

A design optimization procedure using a sequential linear programming technique is proposed in this paper to design minimum weight structures subjected to frequency response and static displacement constraints. The merit of the proposed approach is that the reanalyses of the static and dynamic responses, as well as the computations of the static and dynamic sensitivity data, are performed in a reduced approximate model. A significant saving of computer time for large scale structures is expected. Two numerical examples show good results of this method.     

Adaptive predictive control algorithm based on Laguerre Functional Model

Laguerre Functional Model has many advantages such as good approximation capability for the variances of system time‐delay, order and other structural parameters, low computational complexity, and the facility of online parameter identification, etc., so this model is suitable for complex industrial process control. A series of successful applications have been gained in linear and non‐linear predictive control fields by the control algorithm based on Laguerre Functional Model, however, former researchers have not systemically brought forward the theoretical analyses of the stability, robustness, and steady‐state performance of this algorithm, which are the keys to guarantee the feasibility of the control algorithm fundamentally. Aimed at this problem, we introduce the principles of the Incremental Mode Linear Laguerre Predictive Control (IMLLPC) algorithm, and then systemically propose the theoretical analyses and proofs of the stability and robustness of the algorithm, in addition, we also put forward the steady‐state performance analysis. At last, the control performances of this algorithm on two different physical industrial plants are presented in detail, and a number of experimental results validate the feasibility and superiority of IMLLPC algorithm. Copyright © 2005 John Wiley & Sons, Ltd.     

STUDY ON RESIDUES OF ~（14）C－FENITROTHION IN MODEL RICE－FISH ECOSYSTEM AND FIELD RICE－FISH ECOSYSTEM

ＳＴＵＤＹＯＮＲＥＳＩＤＵＥＳＯＦ~（１４）Ｃ－ＦＥＮＩＴＲＯＴＨＩＯＮＩＮＭＯＤＥＬＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＡＮＤＦＩＥＬＤＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＺｈａｎｇＺｈｏｎｇｌｉａｎｇ（张仲良）；ＷａｎｇＨｕａｘｉｎ（王化新）；Ｇ?..