Microstructure and fracture behaviour of short and long fibre-reinforced polypropylene composites

Microstructure and fracture mechanical behaviour of injection-moulded, longer glass fibrereinforced polypropylene (Verton* aspect ratio 320) were studied as a function of fibre volume fraction and compared to that of shorter fibre-filled polypropylene (aspect ratio 70). Toughness was measured using instrumented notched lzod and falling weight impact tests, as well as compact tension specimens. It was found that the addition of longer fibres generally increased the toughness of the material, although more significant increases were seen in the impact tests than were seen in the compact tension test. For the latter results, a correlation between toughness improvement and microstructural details was performed on the basis of the microstructural efficiency concept, a semi-empirical approach of the formK _c,C = (a* +nR)K _c,M, where,K _c,C andK _c,M are the fracture toughnesses of the composite and the matrix, respectively,_a* is a matrix stress correction factor,n is a scaling parameter andR is a fibre reinforcement effectiveness factor. The latter corrects for differences in the composite microstructures, and incorporates effective fibre orientation factors, layering of injection moulded parts, and fibre volumes in the different layers.Nomenclature a crack length - a ^* matrix toughness correction factor - A cross-sectional area - B thickness of the sample plaques - C thickness of the composite core regions - E _peak energy adsorbed up to the maximum force in the impact load-displacement curve - E _t tensile modulus - F _max maximum force in impact force-displacement curves - f _p fibre orientation factor - f _pe effective orientation factor - f _pe,C effective orientation parameter, core region - f _{pe, s} effective orientation parameter, surface region - F critical load in the tensile test load-displacement curves - K _c critical stress intensity factor/fracture toughness - K _L fracture toughness of the composite materials - K _d dynamic fracture toughness - K _L fracture toughness of the matrix - L test with crack parallel to the mould filling direction - M microstructural efficiency factor - n scaling parameter for reinforcement effectiveness factor (energy absorbtion ratio) - R reinforcement effectiveness factor - S thickness of the composite surface regions - T test with crack perpendicular to the mould filling direction - V _f fibre volume fraction - V _m matrix volume fraction (= 1 —V _f) - W specimen width - W _f fibre weight fraction - W _m matrix weight fraction (= 1 —W _f) - X _n number average fibre length - X _v volume average fibre length - Y(a/ W) polynomial correction for compact tension specimens - variable in effective orientation factor formula - variable in effective orientation factor formula - _B strain to break - _c density of the composite - _f fibre density - _m matrix density - _F fracture strength - fibre angle with respect to a reference direction     

Notch sensitivity of thermoset and thermoplastic laminates loaded in tension

Inplane tensile fracture of unnotched and notched thermoset graphite-epoxy and thermoplastic graphite-PEEK composite laminates is examined. Both fibre-dominated quasi-isotropic and matrix dominated ±45 angle-ply layups were investigated.Classical lamination theory predictions of elastic and strength properties of unnotched specimens are compared with experiments. Several notched geometries, i.e. centre-notched, double-edge notched and open-hole specimens subjected to tensile loading to fracture were examined. The notched strength of the quasi-isotropic laminates was analysed by a damage zone model, where damage around the notch is represented by an equivalent crack with cohesive force acting between the crack surfaces.Good agreement between experimental and calculated strength was observed for the graphite-epoxy laminates which failed in a collinear manner. For the graphite-PEEK laminates discrepancies between predicted and experimental strength are related to observed deviations from collinear crack growth. The angle-ply graphite-PEEK laminates showed larger notch sensitivity than the corresponding graphite-epoxy, probably due to less degree of stress relieving damage formation around the notch.     

A new era dawns for the University Hospital Consortium. Interview by Carolyn Dunbar

A group of 60 university hospitals and medical centers has evolved from its original goal of gaining greater purchasing clout to a new goal: The University Hospital Consortium is becoming an information corporation, with the enormous information potential to affect treatment outcomes, practice patterns and clinical research. Sam Schultz, UHC's vice president of Information Services, tells Computers in Healthcare his organization is on the verge of a new age of discovery.     

The diffusion and solubility of oxygen in solid nickel

Solid-state electrochemical measurements using various experimental procedures were made with the double cell: $$ Ni + NiO|ZrO_2 + Y_2 O_3 |Ni + \underline O |ZrO_2 + Y_2 O_3 |Ni + NiO $$ to determine the diffusivity and thermodynamic functions of oxygen dissolved in solid nickel. Non-steady state diffusion of oxygen in the specimen was caused by applying a preselected potential between the reference and specimen electrodes and was monitored by measuring time-dependent potentials and/or currents. The following results were obtained for the diffusivity of oxygen and the solubility of oxygen in nickel in equilibrium with NiO: $$D{\text{ = 4}}{\text{.9 }} \times {\text{ 10}}^{{\text{ - 2}}} {\text{ exp}}\left( {{\text{ - }}\frac{{{\text{164 kJ/mole}}}}{{{\text{R}}T}}} \right){\text{cm}}^{\text{2}} /{\text{sec (850 to 1400 }}{}^{\text{o}}{\text{C)}}$$ $$C_{\text{O}}^s {\text{ = 8}}{\text{.3 exp}}\left( { - \frac{{55{\text{kJ/mole}}}}{{{\text{R}}T}}} \right){\text{at}}{\text{. pct (800 to 1000 }}{}^{\text{o}}{\text{C)}}$$ The thermodynamic and transport behaviors of oxygen in solid nickel were fairly well described by a simple quasi-regular model and an interstitial diffusion model, respectively.     

Cumin Prevents 17β-Estradiol-Associated Breast Cancer in ACI Rats

Breast cancer (BC) is a leading cause of cancer deaths in women in less developed countries and the second leading cause of cancer death in women in the U.S. In this study, we report the inhibition of E2-mediated mammary tumorigenesis by Cuminum cyminum (cumin) administered via the diet as cumin powder, as well as dried ethanolic extract. Groups of female ACI rats were given either an AIN-93M diet or a diet supplemented with cumin powder (5% and 7.5%, w/w) or dried ethanolic cumin extract (1%, w/w), and then challenged with subcutaneous E2 silastic implants (1.2 cm; 9 mg). The first appearance of a palpable mammary tumor was significantly delayed by both the cumin powder and extract. At the end of the study, the tumor incidence was 96% in the control group, whereas only 55% and 45% animals had palpable tumors in the cumin powder and extract groups, respectively. Significant reductions in tumor volume (660 ± 122 vs. 138 ± 49 and 75 ± 46 mm³) and tumor multiplicity (4.21 ± 0.43 vs. 1.16 ± 0.26 and 0.9 ± 0.29 tumors/animal) were also observed by the cumin powder and cumin extract groups, respectively. The cumin powder diet intervention dose- and time-dependently offset E2-related pituitary growth, and reduced the levels of circulating prolactin and the levels of PCNA in the mammary tissues. Mechanistically, the cumin powder diet resulted in a significant reversal of E2-associated modulation in ERα, CYP1A1 and CYP1B1. Further, the cumin powder diet reversed the expression levels of miRNAs (miR-182, miR-375, miR-127 and miR-206) that were highly modulated by E2 treatment. We analyzed the composition of the extract by GC/MS and established cymene and cuminaldehyde as major components, and further detected no signs of gross or systemic toxicity. Thus, cumin bioactives can significantly delay and prevent E2-mediated mammary tumorigenesis in a safe and effective manner, and warrant continued efforts to develop these clinically translatable spice bioactives as chemopreventives and therapeutics against BC.     

Thai Tea Seed Oil and Virgin Olive Oil Similarly Reduce Plasma Lipids: A Pilot Study within a Healthy Adult Male Population

The potential cardiovascular benefit of virgin olive oil (VOO) is widely recognized. However, the use of VOO at very high cooking temperatures makes these oils poorly suited for many Asian dishes. The use of tea seed oil (TSO) is increasing in Thailand, with TSO having a higher smoke point than VOO. The current study examines the effects of daily TSO intake in healthy adults. In a randomized, single-blind crossover design, 12 men consumed for 3 weeks 40 g day⁻¹ of food prepared with either TSO or VOO as a cooking oil. Plasma lipids, thiobarbituric acid reactive substances (TBARS), and oxidant defense enzyme activities are measured before and after each 3-week intervention period. Gas chromatography analysis of TSO and VOO demonstrates that both oils are equally high in monounsaturated fatty acid. The dietary incorporation of TSO and VOO for three weeks reduces low-density lipoprotein cholesterol (LDL-C) concentrations by 15% and 13%, respectively; with total cholesterol (TC) levels lowered by 10% in both groups. No significant changes in TBARS or antioxidant enzyme activity is observed. These results support the concept that Thai TSO can be utilized as a suitable and healthy alternative oil for high-temperature cooking in many Thai and Asian diets. Practical Applications: Tea seed oil from Camellia oleifera grown in Thailand has been recently reported to favorably lower lipid profiles in hamsters fed a high-fat diet in a manner similar to feeding refined olive oil or grapeseed oil. A pilot crossover trial is conducted to compare the effects of three weeks of daily intake of either TSO or VOO in healthy human adults. Consumption of both oils produced significant reductions in TC and LDL-C. Thai TSO leads to favorable lipid profiles and is a reasonable choice for many Thai and Asian food recipes.     

Segregation Neutralised Steels: Microstructural Banding Elimination from Dual-Phase Steel Through Alloy Design Accounting for Inherent Segregation

Metallurgical and Materials Transactions A - Banding in commercial dual-phase steels, such as banded ferrite and pearlite or ferrite and martensite microstructures, is inherited from segregation...     

The role of thermal shock in cyclic oxidation

The effect of thermal shock on the spalling of oxides from the surfaces of several commercial alloys was determined. The average cooling rate was varied from approximately 240°C/sec to less than 1.0°C/sec during cyclic oxidation tests in air. The tests consisted of 100 cycles of 1 hr at the maximimum temperature (1100 or 1200°C). The alloys were HOS-875, TD-Ni, TD-NiCrAl, In-601, In-702, and B-1900 plus Hf. All of these alloys exhibited partial spalling within the oxide rather than total oxide loss down to bare metal. Thermal shock resulted in deformation of the metal, which in turn resulted, in most cases, in change of the oxide failure mode from compressive to tensile. Tensile failures were characterized by cracking of the oxide and little loss, while compressive failures were characterized by explosive loss of platelets of oxide. This behavior was confirmed by examination of mechanically stressed oxide scales. The thermally shocked oxides spalled less than the slow-cooled samples with the exception of TD-NiCrAl. This material failed in a brittle manner rather than by plastic deformation. The HOS-875 and the TD-Ni did not spall during either type of cooling. Thus, the effect of thermal shock on spalling is determined, in large part, by the mechanical properties of the metal.     

The effect of pre-warming on performance during simulated firefighting exercise

This study examined the effect of active pre-warming on speed and quality of performance during simulated firefighting exercise. Twelve male firefighters performed two trials in counterbalanced order. They were either pre-warmed by 20-min cycling at 1.5 Watt kg⁻¹ body mass (WARM) or remained thermoneutral (CON) prior to a simulated firefighting activity. After the pre-warming, gastrointestinal temperature (P < 0.001), skin temperature (P = 0.002), and heart rate (P < 0.001) were higher in WARM than in CON. During the firefighting activity, rating of perceived exertion, thermal sensation and discomfort were higher for WARM than for CON. Finish time of the firefighting activity was similar, but the last task of the activity was completed slower in WARM than in CON (P = 0.04). In WARM, self-reported performance quality was lower than in CON (P = 0.04). It is concluded that pre-warming reduces the speed during the last part of simulated firefighting activity and reduces self-reported quality of performance.