CRITICAL FLUX DETERMINATION IN ULTRAFILTRATION OF WASTEWATER FROM A FOOD INDUSTRY BY OPTIMIZATION METHOD

Two ultrafiltration membranes with different geometries (spiral polymeric and tubular ceramic) but similar cutoffs were used to treat wastewater from a food industry. Hydrodynamic conditions were optimized by statistical methods as a strategy to get more accurate values of the critical parameters and then to produce higher water flux and minimization of membrane fouling. The validation of the optimization method was obtained by experimental critical flux determination at critical parameters. Membrane fluxes revealed significant differences during filtration. The polymeric membrane showed an optimal flux of 45.60 Lh^?1 m^?2 at 3.21 bar while operating at a stable time of 11.61 h, whereas optimal flux of the ceramic membrane was 32.43 Lh^?1 m^?2 at 3.98 bar for 16.03 h. Experimental critical flux values were only slightly lower than optimal fluxes for both membranes, showing the validity of the statistics models applied. Negligible osmotic pressure was found on the two membranes at critical flux parameters, indicating irreversible fouling for both cases. The polymeric membrane revealed strong fouling behavior and the ceramic membrane showed a weak form; the flux decline occurred first in the polymeric membrane, whereas the ceramic membrane exhibited high stability during the filtration operations. A high degree of purification of wastewater was obtained by this membrane at critical flux conditions.     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Assessment of production efficiency,physicochemical properties and storage stability of spray-dried propolis,a natural food additive,using gum Arabic and OSA starch-based carrier systems

The aim of this work was to obtain propolis in a powder, alcohol-free, water-dispersed and shelf-stable form. Propolis extract was spray-dried using gum Arabic and octenyl succinic anhydride (OSA) starch as carriers in two different weight ratios (1:4 and 1:6). Spray-dried propolis samples were evaluated for morphology, moisture, water activity, water dispersibility, hygroscopicity, particle size, particle distribution, entrapping efficiency, stability, isotherms and antioxidant properties. The spray-drying process produced round particles with sizes ranging from 15 to 24 μm. This process preserved the antioxidant activity of propolis and also allowed propolis to be obtained in a powder form, which was stable during storage at room temperature, had low hygroscopicity and was highly dispersible in cold water. The application of this technology could increase the use of propolis in various industrial applications, such as an antimicrobial and as an antioxidant in food.     

Extrusion deactivation of rice bran enzymes by pH modification

Rice bran is considered in Mexico as “waste”, useful only for feeds. As considerable amounts of oil are available in rice bran, it might be worthwhile to stabilize it and extract the edible oil before using it for feedstuffs. Precisely these oils are responsible for rice bran rapid deterioration, particularly in climatic conditions such as those prevalent in Mexico's tropical areas (high humidity and high temperature). This paper deals with the study of the effect of pH during extrusion of fresh rice bran in order to inactivate lipid‐breaking enzymes. Hydrochloric acid or calcium hydroxide, Ca(OH)₂, were added at 0, 1, 5, 10% (dry basis), and moisture content of the bran samples was varied (20, 30, 40%, dry basis) in a 3² factorial design to corroborate its effect at acid and alkaline pH range. Free fatty acids (FFA) increase was the control variable. Extruded samples were stored at room temperature (between 20 and 28 °C) using a non‐extruded sample as control to assess the shelf life effects. Results indicate that in acid‐extruded samples, the increase in FFA concentration after 98 days was much less than in the unmodified‐pH or alkaline samples. The lowest FFA increase after 3 months of storage time was <10 mg FFA/g rice bran using extrusion with no water or chemicals added or using extrusion adding HCl, irrespective of the moisture content of rice bran.     

Stability of the lipid fraction of milk‐based infant formulas during storage

A study is made of the effects of storage (time and temperature) on the lipid fraction of four milk‐based adapted infant formulas with basically the same composition, though differing in the iron salt added (lactate or sulfate) and/or the vitamin E source (α‐tocopherol or α‐tocopherol acetate). Peroxide value, hydroperoxide C₁₈ percentage and thiobarbituric acid‐reactive substance (TBARS) content were used as indicators of lipid peroxidation. Fat contents remained stable throughout storage. Peroxide values increased from the first storage month and were affected by storage time, although they exhibited irregular behavior. Storage time and temperature affected hydroperoxide percentage, which was seen to be the earliest indicator of lipid oxidation, being measurable in newly manufactured formulas. TBARS values were only affected by storage time. No statistically significant differences were found among the four infant formulas for any of the lipid oxidation indicators.     

Control of Polymer Composition in Pd‐Catalyzed CO/Olefin Terpolymerization Reactions

The CO/tert‐butylstyrene/ethylene terpolymerization catalyzed by Pd‐(N‐N′) complexes was studied. The results evidence that the olefin preferentially inserted in the terpolymer chain is strictly related to the nature of the nitrogen ligand, mainly to its steric constraints, and not to the kind of ligand. Indeed, slight variations in the backbone of the nitrogen ligands coordinated to palladium allow for the synthesis of terpolymers with a controlled composition.     

Novel Therapeutic Opportunities in Neoadjuvant Setting in Urothelial Cancers: A New Horizon Opened by Molecular Classification and Immune Checkpoint Inhibitors

Muscle invasive bladder cancer (MIBC) is a widespread malignancy with a worse prognosis often related to a late diagnosis. For early-stage MIBC pts, a multidisciplinary approach is mandatory to evaluate the timing of neoadjuvant chemotherapy (NAC) and surgery. The current standard therapy is platinum-based NAC (MVAC-methotrexate, vinblastine, doxorubicin, and cisplatin or Platinum–Gemcitabine regimens) followed by radical cystectomy (RC) with lymphadenectomy. However, preliminary data from Vesper trial highlighted that dose-dense NAC MVAC is endowed with a good pathological response but shows low tolerability. In the last few years, translational-based research approaches have identified several candidate biomarkers of NAC esponsiveness, such as ERCC2, ERBB2, or DNA damage response (DDR) gene alterations. Moreover, the recent consensus MIBC molecular classification identified six molecular subtypes, characterized by different sensitivity to chemo- or targeted or immunotherapy, that could open a novel procedure for patient selection and also for neoadjuvant therapies. The Italian PURE-01 phase II Trial extended data on efficacy and resistance to Immune Checkpoint Inhibitors (ICIs) in this setting. In this review, we summarize the most relevant literature data supporting NAC use in MIBC, focusing on novel therapeutic strategies such as immunotherapy, considering the better patient stratification and selection emerging from novel molecular classification.     

The Exception That Proves the Rule: How Sodium Chelation Can Alter the Charge-Cell Binding Correlation of Fluorescein-Based Multimodal Imaging Agents

In the present study we describe and explain an aberrant behavior in terms of receptor binding profile of a fluorescein-based multimodal imaging agent for gastrin releasing peptide receptor (GRPR) visualization by elucidating a chelating mechanism on sodium ions of its fluorescent dye moiety. This hypothesis is supported by both biological results and spectroscopic analyses of different fluorescein-carrying conjugates and an equally charged set of analogous tartrazine-based GRPR-binding imaging agents. Fluorescein interacts with sodium which reduces the overall negative charge of the dye molecule by one. This reduction in apparent total net charge explains the exceptional behavior found for the fluorescein-based multimodal bioconjugate in the context of the charge-cell binding correlation hypothesis.     

Spider Silk-CBD-Cellulose Nanocrystal Composites: Mechanism of Assembly

The fabrication of cellulose-spider silk bio-nanocomposites comprised of cellulose nanocrystals (CNCs) and recombinant spider silk protein fused to a cellulose binding domain (CBD) is described. Silk-CBD successfully binds cellulose, and unlike recombinant silk alone, silk-CBD self-assembles into microfibrils even in the absence of CNCs. Silk-CBD-CNC composite sponges and films show changes in internal structure and CNC alignment related to the addition of silk-CBD. The silk-CBD sponges exhibit improved thermal and structural characteristics in comparison to control recombinant spider silk sponges. The glass transition temperature (Tg) of the silk-CBD sponge was higher than the control silk sponge and similar to native dragline spider silk fibers. Gel filtration analysis, dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and cryo-transmission electron microscopy (TEM) indicated that silk-CBD, but not the recombinant silk control, formed a nematic liquid crystalline phase similar to that observed in native spider silk during the silk spinning process. Silk-CBD microfibrils spontaneously formed in solution upon ultrasonication. We suggest a model for silk-CBD assembly that implicates CBD in the central role of driving the dimerization of spider silk monomers, a process essential to the molecular assembly of spider-silk nanofibers and silk-CNC composites.     

On the Acetylation of Phenanthrene and 9-chlorophenanthrene

Friedel-Crafts acetylation of phenanthrene ( 1a ) in sym-tetrachloroethane yields mixtures of 2-, 3- and 9-acetylphenanthrenes ( 2a, 3a, 4 ). The distribution of isomers is found to depend strongly upon the method of mixing the reagents. Acetylation of 9-chlorophenanthrene ( 1b ), performed by a variety of methods and solvents, led mainly to 3-acetyl-9-chlorophenanthrene ( 3b ) (≥85%). Previously unreported 2-acetyl-9-chlorophenanthrene ( 2b ) was found to form up to a maximum 11% in nitrobenzene.