Effect of high temperature annealing on texture and microstructure on an AISI-444 ferritic stainless steel

AISI 444 is a Mo-alloyed ferritic stainless steel which presents good naphthenic corrosion resistance, making it attractive for applications in petroleum refining plants; however, good formability is also important. To achieve good formability with this alloy the annealing process is crucial. The annealing temperature in ferritic stainless steel is usually around 850 °C, which falls in the range of sigma phase precipitation. A means to avoid this precipitation is to anneal at temperatures around 1000 °C followed by rapid cooling. Annealing at high temperatures can cause grain growth and carbide or nitride precipitation which can result in a reduction of room temperature toughness. In this paper, the rolling and recrystallization textures of AISI 444 steel were studied in samples cold rolled with different thickness reductions (30%, 60%, 80% and 90%) followed by annealing at 955, 980 and 1010 °C. Aspects of grain size and carbide precipitation after annealing were characterized using EBSD and AFM. The material drawability was analyzed through strain rate or Lankford (r) coefficients calculated from texture results.     

Brazilian articles in international journals on Limnology

Summary  We assessed the contribution of Brazilian limnologists (freshwater ecologists) in international journals in the period 1970-2004. Brazilian contribution was low and regular in the 1970's, but increased steeply after 1980 with no signs of stabilization until the present. Articles authored by Brazilians tend to be less cited than articles authored by non-Brazilians, although this difference is reduced in co-authored articles with international researchers.  Brazilian articles are not distributed homogenously among the sub-areas of Limnology, but present some biases that can be explained by intellectual legacy. Brazil has invested since the 1970's in establishing postgraduate courses in Brazil and in the last years has turned the focus to a better qualification of these courses. We believe these are the main reasons for the conspicuous development of Brazilian Limnology.     

800 kV叠装式瓷绝缘子大雨下的性能评估

An 800 kV electric power substation can have more than one hundred of porcelain multicone type insulators supporting busbar structures.Two or more sections in series,having middle and end fittings,compose these insulators.Ageing process can cause degradation of the cement used in this type of insulator and this fact can affect its dielectric performance under heavy rain.This paper presents results of an investigation based on power frequency high voltage tests performed on 800 kV porcelain multicone type insulators,removed from service after having operated for more than 20 years,as well a non-used one that had been stored on site for long time.The insulators were tested in different arrangements:each section at a time and the two sections assembled in series,as actually used insulator columns.The tests were carried out under artificial rain ranging from 1 mm/min to 5 mm/min.The results have confirmed a reduction of up to 30% in the insulator power frequency flashover voltage under 5 mm/min rain conditions and gave important information to the utility about radial cracks that were observed in many insulators and about the discharge mechanisms along the insulators under rain.     

Oligodendrogliomas. Part II: A new grading system based on morphological and imaging criteria

Myocardial perfusion scintigraphy is a noninvasive diagnostic method for the evaluation of patients with suspected or proven coronary artery disease (CAD). We utilized case-based reasoning (CBR) methods to develop the computer-based image interpretation system SCINA which automatically derives from a scintigraphic image data set an assessment concerning the presence of CAD. We compiled a case library of 100 patients who underwent both perfusion scintigraphy and coronary angiography to document or exclude the presence of CAD. The angiographic diagnosis of the retrieved nearest neighbor match of a scintigraphic input case was selected as the CBR diagnosis. We examined the effects of input data granularity, case indexing, similarity metric, and adaptation on the diagnostic accuracy of the CBR application SCINA. For the final prototype, sensitivity and specificity for detection of coronary heart disease were 98% and 70% suggesting that CBR systems may achieve a diagnostic accuracy that appears feasible for clinical use.     

Assessment of Renal Function in Head and Neck Cancer Patients Treated with Cisplatin: Different Biomarkers and Acute Kidney Injury Classifications

Cisplatin is associated with dose-limiting nephrotoxicity, and the timely detection of acute kidney injury (AKI) can affect morbimortality. Therefore, this study aimed to investigate the tools for monitoring renal function in AKI. This was a retrospective, cohort study. Cisplatin-treated patients with head and neck cancer were included. Nephrotoxicity was assessed using serum creatinine, estimated creatinine clearance, serum electrolytic alterations, and plasma kidney injury molecule-1 (KIM-1). The toxicity severity was classified according to Common Terminology Criteria for Adverse Events (CTCAE), and AKI was classified by Risk, Injury, Failure, Loss, and End-stage kidney disease (RIFLE) and Acute Kidney Injury Network (AKIN). A total of 81 participants were included, of whom only 32 did not have AKI. Almost 90% of participants had a decreased estimated glomerular filtration rate five (D5) days after chemotherapy. The AKI estimate differs between AKIN and RIFLE; more participants were diagnosed by the RIFLE at D5, 19.5% versus 2.4% by AKIN, and fifteen had a discordance between these classifications. All laboratory markers showed significant changes on D5. KIM-1 appeared a possible biomarker when considering CTCAE or AKIN classifications (p < 0.05 on D5), but not when RIFLE classification was used (p = 0.0780). Further studies may seek to understand the profiles of different biomarkers together.     

Methicillin‐Resistant Staphylococcus aureus in Raw Meats and Prepared Foods in Public Hospitals in Salvador,Bahia, Brazil

This study investigated the presence of methicillin‐resistant Staphylococcus aureus (MRSA) in raw meat and fish and foods prepared from them for patient consumption in public hospitals in Salvador, Bahia, in northeastern Brazil. A total of 114 samples of raw meat and fish (chicken, n = 30; beef, n = 30; pork, n = 24; and fish, n = 30) and 63 samples of prepared foods (made with chicken, n = 15; beef, n = 15; pork, n = 15; and fish, n = 18) were collected from the kitchens of 10 different hospitals. Of the 114 investigated raw meat and fish samples, 28.1% were positive for MRSA, which comprised 23.3% beef, 23.3% chicken, 37.5% pork, and 30% fish samples. Of the prepared foods, 9.5% were positive for MRSA, which comprised 5.6% chicken products, 6.7% pork products, and 22.2% fish products. MRSA contamination was not detected in prepared beef dishes. A statistical analysis showed no association between the presence of MRSA and the type of raw food (P > 0.05). The high prevalence of MRSA among the raw foods tested and the presence of the microorganism in prepared foods emphasizes the necessity of enforcing hygienic practices within hospital kitchens.     

Enzymatic de-glycosylation of rutin improves its antioxidant and antiproliferative activities

Bioavailability and biological properties of flavonoid glycosides can be improved after the enzymatic hydrolysis of specific glycosyl groups. In this study, we evaluate the antioxidant and antiproliferative potential of rutin after enzymatic hydrolysis performed by α-l-rhamnosidases (hesperidinase from Penicillium sp. and naringinase from Penicillium decumbens) previously heated at 70 °C for 30 min to inactivate the undesirable β-d-glucosidase activity. The highest in vitro antioxidant activity determined by DPPH radical scavenging was achieved with rutin hydrolyzed by hesperidinase. Rutin was predominantly bioconverted into quercetin-3-glucoside. There was no statistical difference between xanthine oxidase inhibition by rutin before and after hydrolysis. However, in vitro inhibitory activity against ten human tumor cell lines showed that hydrolyzed rutin exerted a more potent antiproliferative effect than quercetin and rutin on various cancer cell lines, specially glioma, and ovarian and breast adenocarcinomas. These results indicate that quercetin-3-glucoside could be a promising functional derivative obtained by rutin hydrolysis.     

A Guide to Polysaccharide-Based Hydrogel Bioinks for 3D Bioprinting Applications

Three-dimensional (3D) bioprinting is an innovative technology in the biomedical field, allowing the fabrication of living constructs through an approach of layer-by-layer deposition of cell-laden inks, the so-called bioinks. An ideal bioink should possess proper mechanical, rheological, chemical, and biological characteristics to ensure high cell viability and the production of tissue constructs with dimensional stability and shape fidelity. Among the several types of bioinks, hydrogels are extremely appealing as they have many similarities with the extracellular matrix, providing a highly hydrated environment for cell proliferation and tunability in terms of mechanical and rheological properties. Hydrogels derived from natural polymers, and polysaccharides, in particular, are an excellent platform to mimic the extracellular matrix, given their low cytotoxicity, high hydrophilicity, and diversity of structures. In fact, polysaccharide-based hydrogels are trendy materials for 3D bioprinting since they are abundant and combine adequate physicochemical and biomimetic features for the development of novel bioinks. Thus, this review portrays the most relevant advances in polysaccharide-based hydrogel bioinks for 3D bioprinting, focusing on the last five years, with emphasis on their properties, advantages, and limitations, considering polysaccharide families classified according to their source, namely from seaweed, higher plants, microbial, and animal (particularly crustaceans) origin.     

An unsupervised approach for fault diagnosis of power transformers

Electrical utilities apply condition monitoring on power transformers (PTs) to prevent unplanned outages and detect incipient faults. This monitoring is often done using dissolved gas analysis (DGA) coupled with engineering methods to interpret the data, however the obtained results lack accuracy and reproducibility. In order to improve accuracy, various advanced analytical methods have been proposed in the literature. Nonetheless, these methods are often hard to interpret by the decision-maker and require a substantial amount of failure records to be trained. In the context of the PTs, failure data quality is recurrently questionable, and failure records are scarce when compared to nonfailure records. This work tackles these challenges by proposing a novel unsupervised methodology for diagnosing PT condition. Differently from the supervised approaches in the literature, our method does not require the labeling of DGA records and incorporates a visual representation of the results in a 2D scatter plot to assist in interpretation. A modified clustering technique is used to classify the condition of different PTs using historical DGA data. Finally, well-known engineering methods are applied to interpret each of the obtained clusters. The approach was validated using data from two different real-world data sets provided by a generation company and a distribution system operator. The results highlight the advantages of the proposed approach and outperformed engineering methods (from IEC and IEEE standards) and companies legacy method. The approach was also validated on the public IEC TC10 database, showing the capability to achieve comparable accuracy with supervised learning methods from the literature. As a result of the methodology performance, both companies are currently using it in their daily DGA diagnosis.