Does Helicobacter pylori-induced gastritis enhance food-stimulated insulin release?

The fact that H. pylori gastritis results in an increased secretion of basal and meal-stimulated gastrin, which is also a physiologic amplifier of insulin release directed us to investigate whether H. pylori gastritis may lead to an enhancement of nutrient-stimulated insulin secretion. For this purpose, we have investigated the insulin responses to both oral glucose and a mixed meal in 15 patients with H. pylori gastritis before and one month after the eradication therapy and also in 15 H. pylori-negative control subjects. The areas under the curve (AUC) for serum insulin following both oral glucose and a mixed meal in the patients with H. pylori gastritis before the eradication were significantly (P < 0.05) higher than those in the H. pylori-negative controls. After the eradication of H. pylori, the AUC for serum insulin following oral glucose and mixed meal decreased by 9.4% and 13.1%, respectively (P < 0.001 in both), and serum basal and meal-stimulated gastrin levels decreased significantly (P < 0.001). These results suggest that H. pylori gastritis enhances glucose and meal-stimulated insulin release probably by increasing gastrin secretion.     

Self-standing piezoelectric nanogenerator fabrics from ZnO-doped PVDF nanofiber yarns

Today a wide variety of wearable electronics are in our daily lives and their uses are increasing. The development of portable, flexible, lightweight, cost-effective, and stable devices that produce sustainable energy with renewable approaches in the field of wearable electronics, as in every field, is one of the important issues of today. According to their volume and weight, the use of nanofibers with high surface area in energy-generating devices may bring them advantages such as lightness and higher energy density. Therefore, in recent years, researchers have focused on the development of nanofiber-based nanogenerators that produce energy using mechanical energy in a sustainable and renewable way. In this paper, self-standing piezoelectric nanogenerator (PENG) fabrics were obtained by developing flexible composite poly(vinylidene fluoride) (PVDF) nanofiber yarns doped with zinc oxide (ZnO) nanoparticles at different rates to provide higher power output. It has been characterized from electromechanical, structural, and morphological aspects. The most successful self-standing PENG fabric obtained (at 5% ZnO loading) doubled the energy output of the fabric made from pure PVDF nanofiber yarn and provided a peak total power of 81 μW and a power density of 30 μW/cm². The present results open up the field for the development of PVDF/ZnO-based nanomats and their use in sensors and actuators in the healthcare and engineering industries.     

Examining combustion and emission characteristics of cotton methyl ester to which manganese additive material was added

Journal of Mechanical Science and Technology - Important researches is being conducted in order to decrease the emissions and fuel consumption. Emissions and fuel consumption has been dramatically...     

Development of flame retardancy properties of new halogen‐free phosphorous doped SiO2 thin films on fabrics

In this study, flame retardancy properties of fabrics treated with phosphorous (P) doped and undoped SiO₂ thin films were developed by sol–gel technique. As to this aim, P‐doped and undoped SiO₂ film were coated on cotton fabric from the solutions prepared from P, Si‐based precursors, solvent, and chelating agent at low temperature in air using sol–gel technique. To determine solution characteristics, which affect thin film structure, turbidity, pH values, and rheological properties of the prepared solutions were measured using a turbidimeter, a pH meter, and a rheometer machines before coating process. The thermal, structural, and microstructural characterization of the coating were done using differential thermal analysis/thermograviometry, fourier transform infrared spectroscopy, X‐ray diffractometry, and scanning electron microscopy. In addition, tensile strength, wash fastness, flame retandancy, and lightness properties of the coated fabrics were determined. To compensate the slight loss of tensile strength of samples, which occurred at the treated fabrics with P‐doped Si‐based solutions, the cotton fabrics were coated with polyurethane films during second step. In conclusion, the flame retardant cotton fabric with durability of washing as halogen‐free without requiring after treatment with formaldehyde was fabricated using sol–gel processing for the first time. Moreover the cotton fabrics, which were treated with P‐doped Si‐based solutions and then coated with polyurethane at second step, still has got nonflammable property. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Comparison of the Effectiveness of Bonding Composite to Zirconia as a Repair Method

Chipping of the veneering porcelain is often reported in the literature. Intraoral repair of chipped veneering porcelain provides an option when the restoration cannot be removed and replaced. This in vitro study investigated the bond strength of two porcelain repair methods to the zirconia ceramic after different aging conditions. A total of 120 (Vita InCeram YZ) samples were divided into two main groups according to the different repair methods (n = 60). The first method was using a porcelain repair kit (Bisco), and the second method was repairing with a universal adhesive (Single Bond Universal Adhesive) and a composite resin (Z100). Each group was divided into two subgroups (n = 30) according to surface modification (with or without airborne particle abrasion). Each group was then divided into three subgroups (n = 10) depending on aging conditions. Shear bond strength tests were performed to measure the adhesion strength between composite and zirconia surfaces. Statistical analysis was performed with 3‐way ANOVA, followed by Tukey HSD test (α = 0.05). Surface conditioning by airborne particle abrasion affected the strength values in the repair kit group compared with conventionally repaired group. Conventionally repaired group showed statistically significant higher bond strength values than repair kit group.     

Regulation of Molecular Targets in Osteosarcoma Treatment

The most prevalent malignant bone tumor, osteosarcoma, affects the growth plates of long bones in adolescents and young adults. Standard chemotherapeutic methods showed poor response rates in patients with recurrent and metastatic phases. Therefore, it is critical to develop novel and efficient targeted therapies to address relapse cases. In this regard, RNA interference technologies are encouraging options in cancer treatment, in which small interfering RNAs regulate the gene expression following RNA interference pathways. The determination of target tissue is as important as the selection of tissue-specific promoters. Moreover, small interfering RNAs should be delivered effectively into the cytoplasm. Lentiviral vectors could encapsulate and deliver the desired gene into the cell and integrate it into the genome, providing long-term regulation of targeted genes. Silencing overexpressed genes promote the tumor cells to lose invasiveness, prevents their proliferation, and triggers their apoptosis. The uniqueness of cancer cells among patients requires novel therapeutic methods that treat patients based on their unique mutations. Several studies showed the effectiveness of different approaches such as microRNA, drug- or chemotherapy-related methods in treating the disease; however, identifying various targets was challenging to understanding disease progression. In this regard, the patient-specific abnormal gene might be targeted using genomics and molecular advancements such as RNA interference approaches. Here, we review potential therapeutic targets for the RNA interference approach, which is applicable as a therapeutic option for osteosarcoma patients, and we point out how the small interfering RNA method becomes a promising approach for the unmet challenge.     

A study on swelling behavior of poly(p‐chloro styrene) networks in some aromatic hydrocarbons and linear poly(p‐chloro styrene) solutions

Crosslinked networks (NPPCS) and linear polymers (LPPCS) of poly (p‐chloro styrene) were synthesized by free‐radical polymerization of p‐chloro styrene. NPPCS networks were swollen in four different molecular weights of LPPCS solutions in toluene at three different concentrations. The equilibrium swelling results were evaluated by means of Flory‐Rehner theory to obtain network–linear polymer interaction parameter, χ′₂₃ between NPPCS and LPPCS. It was concluded that the parameter χ′₂₃ decreased with molecular weight but increased with concentration of LPPCS in outer solution. The solvent independent interaction parameter between NPPCS and PPCS was estimated as 0.7 by extrapolation of the values of χ′₂₃ to zero value of the fraction ratio of solvent to linear polymer, ν₁/ν₃ inside the network. As well as, the binary interaction parameters, χ₁₂ of NPPCS with benzene, ethyl benzene, n‐propyl benzene and isopropyl benzene were obtained by means of Flory‐Rehner theory at temperatures between 25 and 55°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Enhancement of Heat Transfer in Partially Heated Vertical Channel Under Mixed Convection by Using Al2O3 Nanoparticles

Laminar mixed convection in a two-dimensional symmetrically and partially heated vertical channel is investigated. The heaters are located on both walls and uniform temperature is applied on the heated sections. The number of heaters is considered as 1, 4, 8, and 10. Aluminum oxide/water nanofluid is considered as working fluid and the inlet velocity is uniform. The continuity, momentum and energy equations with appropriate boundary conditions are solved in dimensionless form, numerically. The study is performed for Richardson number of 0.01 and 10, Reynolds number of 100 and 500, and nanofluid volume fraction of 0% and 5%. Based on the obtained velocity and temperature distributions, the local and mean Nusselt number is calculated and plotted for different cases. The variation of the mean Nusselt number with the number of the heated portions is also discussed. It is found that the addition of nanoparticles into the base fluid increases mean Nusselt number but the rate of increase depends on Reynolds, Richardson numbers and number of heated portions. It is possible to increase mean Nusselt number 138% by increasing Reynolds number from 100 to 500, Richardson number from 0.01 to 10 and number of heated portions from 1 to 10 when volume fraction value is 5%.