TGF-β1 is known to inhibit muscle regeneration after muscle injury. However, it is unknown if high systemic levels of TGF-β can affect the muscle regeneration process. In the present study, we demonstrated the effect of a CCl4 intra-peritoneal injection and losartan (an angiotensin II type 1 receptor antagonist) on skeletal muscle (gastrocnemius muscle) injury and regeneration. Male C57BL/6 mice were grouped randomly as follows: control (n = 7), CCl4-treatment group (n = 7), and CCl4 + losartan treatment group (n = 7). After CCl4 treatment for a 16-week period, the animals were sacrificed and analyzed. The expression of dystrophin significantly decreased in the muscle tissues of the control group, as compared with that of the CCl4 + losartan group (p < 0.01). p(phospho)-Smad2/3 expression significantly increased in the muscles of the control group compared to that in the CCl4 + losartan group (p < 0.01). The expressions of Pax7, MyoD, and myogenin increased in skeletal muscles of the CCl4 + losartan group compared to the corresponding levels in the control group (p < 0.01). We hypothesize that systemically elevated TGF-β1 as a result of CCl4-induced liver injury causes skeletal muscle injury, while losartan promotes muscle repair from injury via blockade of TGF-β1 signaling. 相似文献
Corynebacterium glutamicum is widely used for amino acid production. In the present study, 543 genes showed a significant change in their mRNA expression levels in l-lysine-producing C. glutamicum ATCC21300 than that in the wild-type C. glutamicum ATCC13032. Among these 543 differentially expressed genes (DEGs), 28 genes were up- or downregulated. In addition, 454 DEGs were functionally enriched and categorized based on BLAST sequence homologies and gene ontology (GO) annotations using the Blast2GO software. Interestingly, NCgl0071 (bioB, encoding biotin synthase) was expressed at levels ~20-fold higher in the l-lysine-producing ATCC21300 strain than that in the wild-type ATCC13032 strain. Five other genes involved in biotin metabolism or transport—NCgl2515 (bioA, encoding adenosylmethionine-8-amino-7-oxononanoate aminotransferase), NCgl2516 (bioD, encoding dithiobiotin synthetase), NCgl1883, NCgl1884, and NCgl1885—were also expressed at significantly higher levels in the l-lysine-producing ATCC21300 strain than that in the wild-type ATCC13032 strain, which we determined using both next-generation RNA sequencing and quantitative real-time PCR analysis. When we disrupted the bioB gene in C. glutamicum ATCC21300, l-lysine production decreased by approximately 76%, and the three genes involved in biotin transport (NCgl1883, NCgl1884, and NCgl1885) were significantly downregulated. These results will be helpful to improve our understanding of C. glutamicum for industrial amino acid production. 相似文献
This paper describes a mixture of fatty acids that is available for temperature‐controlled release of drugs. The mixture consists of two fatty acids with different melting points. At a specific composition, the mixture represents a single melting point of 38–40 °C which is slightly above the normal human body temperature. To demonstrate its use in the temperature‐regulated release, this study fabricates fatty acid‐incorporated polymer fibers containing dye‐loaded polymer particles in their core. Below the melting point of the mixture, it will be in a solid state to restrict the passing of dye loaded in the core whereas the dye can be released instantly through the generated pores at a temperature slightly higher than the melting point. The release profiles of the dye can be further manipulated by varying the amount of the mixture contained in the fibers and the composition of the mixture.
Cable-driven parallel robots (CDPRs) have many advantages over conventional link-based robot manipulators in terms of acceleration due to their low inertia. This paper concerns about under-constrained CDPRs, which have a less number of cables than six, often used favorably due to their simpler structures. Since a smaller number of cables than 6 are employed, however, their payloads have extra degrees of motion freedom and exhibit swaying motions or oscillation. In this paper, a scheme to suppress unwanted oscillatory motions of the payload of a 4-cable-driven CDPR based on a Zero-vibration (ZV) input-shaping scheme is proposed. In this method, a motion in the 3-dimensional space is projected onto the independent motions on two vertical planes perpendicular to each other. On each of the vertical plane, the natural frequency of the CDPR is computed based on a 2-cable-driven planar CDPR model. The precise dynamic model of a planar CDPR is obtained in order to find the natural frequency, which depends on the payload position. The advantage of the proposed scheme is that it is possible to generate an oscillation-free trajectory based on a ZV input-shaping scheme despite the complexity in the dynamics of the CDPR and the difficulty in computing the natural frequencies of the CDPR, which is required in any ZV input-shaping scheme. To verify the effectiveness of the proposed method, a series of computer simulations and experiments were conducted for 3- dimensional motions with a 4-cable-driven CDPR. Their results showed that the motions of the CDPR with the proposed method exhibited a significant reduction in oscillations of the payload. However, when the payload moves near the edges of its workspace, the improvement in oscillation reduction diminished as expected due to the errors in model projection.
International Journal of Coal Science & Technology - Coal fly ash originated from coal combustion has high concentrations of metals. If suitable leaching techniques are identified, then coal... 相似文献
Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.
Journal of Mechanical Science and Technology - Regarding mine ventilation in a tunnel with one mining face, the turbulent flow structure and Mean age of air (MAA) of fresh air discharged from the... 相似文献
Electricity generation through fossil fuels has caused environmental pollution. Accordingly, research on new renewable energy (solar, wind, geothermal heat, etc.) to replace fossil fuels and solve this problem is in progress. These devices can consistently generate power. However, they have several drawbacks, such as high installation costs and limitations in possible set-up environments. Therefore, the piezoelectric harvesting technology, which is able to overcome the limitations of existing energy technologies, is actively being studied. The piezoelectric harvesting technology uses the piezoelectric effect, which occurs in crystals that generate voltage when stress is applied. Its advantages include a wider installation base and a lower technological cost. This study investigated a piezoelectric energy-harvesting device based on constant wave motion. This device can harvest power in a constant turbulent flow in the middle of the sea. The components of the device are circuitry, percussion bar, triple layer piezoelectric bender, bearing and rudder. A multiphysical analysis coupled with the structure and piezoelectric elements was also conducted to estimate the device performance. The analysis accuracy was improved by applying the impact energy to the bender calculated based on the shape of the wave in the East Sea. The proposed device’s performance was finally confirmed by experiments. 相似文献
The advent of smart factories has resulted in the frequent utilization of industrial robots within factories to increase production automation and efficiency. Due to the increase in the number of industrial robots, it has become more important to prevent any unexpected breakdowns of the factory. As a result, the lifespan prediction of machinery has become a crucial factor because such failures can be directly associated with factory productivity resulting in significant losses. Most of the failures occur within one of the core components of the robot arm, the servo motor, and thus we will focus on the analysis of the servo motor in this study. However, sensor attachment to such equipment is considered difficult due to the dynamic movement of the robot arm, meaning that internal instrumentation should be utilized during analysis. In addition, no definite measure to determine the degradation of the motor exists, and thus a new degradation index is proposed in this study. Therefore, in this study, the lifespan of the servo motor will be estimated through accelerated degradation testing methods based on a new system degradation assessment method, which estimates the fault of the system using observer-based residuals with encoder data obtained from internal instrumentation. 相似文献