有源电光调制式高功率瞬态电场传感器的研制

瞬态电场防护及应用技术的研究离不开瞬态电场测试系统;文中基于有源电光调制法,研制了一种高功率瞬态电场传感器;通过建立该传感器的等效电路模型,并借助CST仿真建模,分别从频域和时域角度分析了传感器的接收特性,并得到了一致的结果;最后利用脉冲噪声模拟器和吉赫兹横电磁波小室对研制的传感器性能进行了测试;结果表明:接收天线为单极子天线,天线负载采用高阻时响应电压与被测电场场强成正比;研制的传感器带宽为10kHz～314MHz,可用于纳秒级高功率瞬态电场的时域测试。     

A novel adaptive cooperative location algorithm for wireless sensor networks

To overcome the disadvantages of the location algorithm based on received signal strength indication(RSSI) in the existing wireless sensor networks(WSNs),a novel adaptive cooperative location algorithm is proposed.To tolerate some minor errors in the information of node position,a reference anchor node is employed.On the other hand,Dixon method is used to remove the outliers of RSSI,the standard deviation threshold of RSSI and the learning model are put forward to reduce the ranging error of RSSI and improve the positioning precision effectively.Simulations are run to evaluate the performance of the algorithm.The results show that the proposed algorithm offers more precise location and better stability and robustness.     

一种制做三维牙——颌骨光弹性模型的新方法

本文提出一种用“整体浇注法”制做三维牙——颌骨光弹性模型的新方法,即用价格便宜的石膏做阴模,先制出与真实牙几何相似的牙光弹性模型和模拟牙周膜的乳胶套,将它们粘接好,然后将其放入颌骨石膏阴模的适当位置,浇入环氧树脂混合液,用“二次固化法”进行固化,即可制成三维牙——颌骨整体光弹性模型。此法能保证模型与实物的严格几何相似和牙周的边界条件相似,使实验精度大大提高且工艺简单、成本低。     

基于IPv6技术的网络家电控制电路设计

随着信息技术的发展,计算机网络越来越深入平时的生产生活中,家用电器网络化已经成为一种发展趋势。本文实现一种基于IPv6技术的家电网络控制电路的硬件设计。应用该方法设计的家电系统在智能化及网络化具有较好性能。     

企业无线网络架设与安全

通过对当前企业无线网络的需求分析,阐述了无线技术和无线网络的发展历史和过程,结合无线网络在家庭用户和企业间架设的不同特点,提出了针对企业用户的无线网络架设的解决方案,同时也阐明了安全问题的重要性。最后结合某公司无线网络架设实例,论述解决方案的设计、实现过程。     

The Effects of Insulin-Like Growth Factor I and BTP-2 on Acute Lung Injury

Acute lung injury (ALI) afflicts approximately 200,000 patients annually and has a 40% mortality rate. The COVID-19 pandemic has massively increased the rate of ALI incidence. The pathogenesis of ALI involves tissue damage from invading microbes and, in severe cases, the overexpression of inflammatory cytokines such as tumor necrosis factor-α (TNF-α) and interleukin-1β (IL-1β). This study aimed to develop a therapy to normalize the excess production of inflammatory cytokines and promote tissue repair in the lipopolysaccharide (LPS)-induced ALI. Based on our previous studies, we tested the insulin-like growth factor I (IGF-I) and BTP-2 therapies. IGF-I was selected, because we and others have shown that elevated inflammatory cytokines suppress the expression of growth hormone receptors in the liver, leading to a decrease in the circulating IGF-I. IGF-I is a growth factor that increases vascular protection, enhances tissue repair, and decreases pro-inflammatory cytokines. It is also required to produce anti-inflammatory 1,25-dihydroxyvitamin D. BTP-2, an inhibitor of cytosolic calcium, was used to suppress the LPS-induced increase in cytosolic calcium, which otherwise leads to an increase in proinflammatory cytokines. We showed that LPS increased the expression of the primary inflammatory mediators such as toll like receptor-4 (TLR-4), IL-1β, interleukin-17 (IL-17), TNF-α, and interferon-γ (IFN-γ), which were normalized by the IGF-I + BTP-2 dual therapy in the lungs, along with improved vascular gene expression markers. The histologic lung injury score was markedly elevated by LPS and reduced to normal by the combination therapy. In conclusion, the LPS-induced increases in inflammatory cytokines, vascular injuries, and lung injuries were all improved by IGF-I + BTP-2 combination therapy.     

Adsorption Mechanism and Electrochemical Properties of Methyl Blue onto Magnetic CoxCu(1–x)Fe2O4 Nanoparticles Prepared via an Alcohol Solution of Nitrate Combustion and Calcination Process

Journal of Inorganic and Organometallic Polymers and Materials - Magnetic CoxCu(1–x)Fe2O4 nanoparticles were prepared via an alcohol solution of nitrate combustion and calcination process....     

原位反应自发渗透法TiC／AZ91D镁基复合材料及AZ91D镁合金的拉伸变形与断裂行为

利用原位反应自发渗透技术合成了47．5％碳化钛TiC（体积分数，下同）增强AZ91D镁基复合材料，对比研究了该复合材料与铸态镁合金AZ91D基体的室温与高温拉伸变形行为，观察了拉伸断口微观组织形貌，并分析了这两种材料的断裂特征。结果表明，TiC／Mg复合材料具有良好的高温力学性能，在拉伸变形速率为0．001s^-1以及温度为723K，时其拉伸强度可达91．1MPa，而此时相同变形条件下的铸态AZ91D镁合金拉伸断裂强度只有41．1MPa，增幅达120％。而在室温下，镁基复合材料的拉伸断裂强度仅高出基体铸态镁合金23．4％。镁基复合材料的断裂应变较低，高低温时均表现为脆性断裂；而镁合金则由室温下的脆性断裂向高温下的韧性断裂过渡。     

钛合金冷坩埚电磁约束铸造工艺研究

针对液态下化学性质相对活泼的钛合金,采用冷坩埚技术对电磁约束铸造工艺过程进行了试验研究,考察了工艺条件对成形坯件表面质量和内部组织的影响.结果表明:试样抽拉速度变化对表面质量和宏观组织的影响明显,加热功率虽然对组织变化影响不大,但对表面质量影响较为显著.通过优化工艺,可以获得既有较光滑铸造表面又具有一次定向凝固组织的钛合金铸件.讨论了铸造过程裂纹和组织缺陷的形成机理,获得到了表面光滑无裂纹,宏观组织为柱状晶的钛合金大尺寸圆坯.     

锻压机械打击力测量误差的加速度补偿

提出了锻压机械打击力测量中存在的问题，介绍了常用的补偿法，并通过实验验证了加速度补偿法是消除锻压机械打击力测量误差的有效途径。