Automatic dimensional reduction and meshing of stiffened thin-wall structures

The creation of idealised, dimensionally reduced meshes for preliminary design and optimisation remains a time-consuming, manual task. A dimensionally reduced model is ideal for assessing design changes through modification of element properties without the need to create a new geometry or mesh. In this paper, a novel approach for automating the creation of mixed dimensional meshes is presented. The input to the process is a solid model which has been decomposed into a non-manifold assembly of smaller volumes with different meshing significance. Associativity between the original solid model and the dimensionally reduced equivalent is maintained. The approach is validated by means of a free-free modal analysis on an output mesh of a gas turbine engine component of industrial complexity. Extensions and enhancements to this work are also discussed.     

INTEGRATING ALBEMARLE RESOLVE DESULFURIZATION TECHNOLOGY WITH NOVEL PETRO-CANADA PROCESS CONCEPTS IN COMMERCIAL FCCU OPERATIONS

The gasoline and distillate sulfur regulations promulgated throughout the world to reduce tail-pipe emissions are now strongly impacting refinery operations and investments. FCC gasoline is recognized as the principal contributor of sulfur to the gasoline pool and has become the focus for meeting the new specifications. The difficulty in removing sterically hindered sulfur species in the fluid catalytic cracking unit (FCCU) cycle oil drives up the hydrogen and investment costs for treating the distillates. Although installation of pre- and post-treatment facilities is planned by many refiners, other non-capital approaches such as undercutting are being evaluated to meet interim and future sulfur levels. Even when expensive treatment facilities are installed, operating costs can be lowered and the flexibility of the facility increased with improvements in the ability to remove sulfur in the FCCU. In this article, we detail Petro-Canada's experience in integrating Albemarle's RESOLVE sulfur reduction technology with a combination of innovative process ideas. These concepts include heavy naphtha recycle, coprocessing of hydrogen donor feeds, and recycle of light cycle oil (LCO) to a specially designed stripper reactor. Special attention is paid to the interaction of deep FCC feed hydrodesulfurization with the FCC performance. The results demonstrate that very low FCC gasoline sulfur levels can be achieved without significant capital investment through novel approaches to recycle, creative integration of cat feed hydrotreating unit (CFHTU)-FCCU designs and operations, and application of state-of-the-art sulfur reduction additive technology. An added benefit of the RESOLVE 950 sulfur reduction technology is the substantial elimination of sulfur oxides in the FCC flue gas. This has been observed in Petro-Canada operations and numerous other RESOLVE 950 applications around the world.     

Combinatorial chemistry methods for coating development: VI. Correlation of high throughput screening methods with conventional measurement techniques

Combinatorial chemistry has proven to be a valuable tool for the development of new compounds. In the pharmaceutical industry, where combinatorial chemistry began, the approach has been instrumental in the high-speed development of new drugs. Due to the overwhelming success of the combinatorial methodology in the pharmaceutical industry, it has been recently applied to materials development. We have recently developed a combinatorial factory capable of preparing and evaluating on the order of 100 organic clear coatings in a day.

One of the most challenging aspects of the creation of the combinatorial factory was the development of the high throughput screening (HTS) methods for the primary coating properties of interest such as optical clarity, abrasion resistance, adhesion, and weatherability. For each property, an entirely new method was developed that allowed for rapid measurement of these properties on very small samples. This paper describes various aspects of the development of these novel measurement systems including the correlation of the HTS methods with conventional, industry standard measurement methods.     

Platinum-group metal cyclodextrin complexes and their use as command-cure catalysts in silicones

The Command-Cure concept is defined for a curable formulation as one with long work-like at ambient temperature and rapid cure time at elevated temperature. This concept is explored for a curable silicone system, cured via hydrosilylation. CODMCl₂ complexes (COD=1.5-cyclo-octadiene:M=Pt. Pd) are reacted with beta-cyclodextrin (-CD) to make 11 inclusion compounds,M=Pd.2;M=Pt.4. Compounds2 and4 were analyzed by¹H NMR and X-ray powder diffraction. Their catalytic ability was evaluated in a model system as well as a polymeric system that gels upon cure. Surprisingly, the Pd analog2 was a good command-cure catalyst whereas the guest compound CODPdCl₂,1, was not active in the hydrosilylation reaction. The Pt analog,4, was an effective command-cure catalyst while the corresponding guest. CODPtCl₂,3, was too active at low temperature in the hydrosilylation reaction. Additional Pt compounds and one Rh inclusion compound were evaluated as command cure catalysts. These inclusion compounds were: 11 -CD:[CODRhCl]₂,5: 11 -CD:CpPtMe₃,6 (Cp=cyclopentadienyl): 12 -CD:MeCpPtMe₃,7; 12 -CO:CODPtMe₂,8. The effectiveness of4 8 was evaluated in a number of silicone systems.     

Identification of leek-moth and diamondback-moth frass volatiles that stimulate parasitoid,Diadromus pulchellus

Acrolepiopsis assectella andPlutella xylostella frass volatiles, trapped on Tenax GC, were examined by capillary gas chromatography. In both moths, the same three disulfides, dimethyl, dipropyl, and methyl propyl, were the most abundant substances, but in different proportions. The synthetic disulfides elicited the same behavioral response by the parasitoid,Diadromus pulchellus as frass. The plant origin of these substances is discussed.     

Flow distribution in spiral mandrel dies

An analysis of flow of a power law fluid in a spiral mandrel die is presented. The analysis is applied to study the effect of various die design parameters on the flow distribution at the end of the spiral mandrel section. Three variables that have a very strong effect on the flow distribution are the number of grooves, the initial clearance, and the groove helix angle. The distribution is improved by increasing the number of grooves, by using a non-zero initial clearance, and a relatively small helix angle. Two more variables that have a significant effect on the flow distribution are the taper angle and the initial groove depth. The optimum taper angle was found to be between 1 and 3 degrees. The distribution uniformity improves with the initial groove depth, while the pressure drop reduces at the same time.     

Récupération sélective du vanadium dans l'effluent d'un procédé de fabrication du blanc de titane

The selective recovery of vanadium from an effluent of a manufacturing process for titanium white (oxide) has been made. The process retained is based on the partial neutralization of the effluent by means of calcium carbonate and on the separation of metal hydroxides from calcium sulfate and the solution. The hydroxides are thereafter calcined in the presence of a sodium salt, so that sodium vanadate may then be extracted by washing with water. Vanadium is finally precipitated by the addition of ammonium chloride or pH adjustment. The experimental results obtained in the laboratory study of the effluent neutralization, the calcination and leaching of the hydroxides and the vanadium precipitation are presented and discussed. The yields obtained in the various stages and their interdependance are also discussed.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

DYNAMIC TENSIONS IN FINITE OIL DROPLETS

In reacting systems, dynamic interfacial tension (IFT) values above 10-20 mN/m are often encountered. For such high tension values, infinitely long oil droplets will not be realised in spinning drop tensiometry. Hence, Vonnegut's solution will not be strictly valid. The experimentalist is then compelled to use one of the several alternative solution schemes proposed in the literature. We have obtained dynamic IFT data for 0.3125 mM oleic acid in hexadecane contacted with various NaOH solutions by the use of a novel experimental scheme called photo-micropendography. These tension values were then compared with spinning drop tensiometer data calculated by using three alternative solution schemes, namely, Vonnegut's method, the formula of Slattery and Chen and the analysis of Princen el al. The comparison showed that when the droplet's length/width ratio was below 2.5, Vonnegut's formula was severely in error. The solution scheme proposed by Slattery and Chen gave tension values close to those found by photo-micropendography over the entire range of IFT values exhibited by the oleic acid/caustic systems. However, the most consistent and reasonably accurate tension values resulted from the use of Table I in the paper by Princen, Zia and Mason. A simplified computer algorithm has been proposed for calculating dynamic interfacial tensions using the formulas and tables proposed by the latter authors. However, at length/width ratios above 2.5, the agreement between interfacial tensions determined by micropendography and spinning drop data calculated by the use of Vonnegut's solution was quite good.