Biomedical Visual Computing: Case Studies and Challenges

Advances in computational geometric modeling, imaging, and simulation let researchers build and test models of increasing complexity, generating unprecedented amounts of data. As recent research in biomedical applications illustrates, visualization will be critical in making this vast amount of data usable; it's also fundamental to understanding models of complex phenomena.     

Microstructure Evolution and Tensile Properties of a Selectively Laser Melted CoNi-Base Superalloy

Metallurgical and Materials Transactions A - A high $$\gamma ^{\prime }$$ volume fraction CoNi-base superalloy with roughly equal amounts of cobalt and nickel was successfully processed through...     

Effects of a single dose of N-Acetyl-5-methoxytryptamine (Melatonin) and resistance exercise on the growth hormone/IGF-1 axis in young males and females

Melatonin and resistance exercise alone have been shown to increase the levels of growth hormone (GH). The purpose of this study was to determine the effects of ingestion of a single dose of melatonin and heavy resistance exercise on serum GH, somatostatin (SST), and other hormones of the GH/insulin-like growth factor 1 (IGF-1) axis. Physically active males (n = 30) and females (n = 30) were randomly assigned to ingest either a melatonin supplement at 0.5 mg or 5.0 mg, or 1.0 mg of dextrose placebo. After a baseline blood sample, participants ingested the supplement and underwent blood sampling every 15 min for 60 min, at which point they underwent a single bout of resistance exercise with the leg press for 7 sets of 7 reps at 85% 1-RM. After exercise, participants provided additional blood samples every 15 min for a total of 120 min. Serum free GH, SST, IGF-1, IGFBP-1, and IGFBP-3 were determined with ELISA. Data were evaluated as the peak pre- and post-exercise values subtracted from baseline and the delta values analyzed with separate three-way ANOVA (p < 0.05). In males, when compared to placebo, 5.0 mg melatonin caused GH to increase (p = 0.017) and SST to decrease prior to exercise (p = 0.031), whereas both 0.5 and 5.0 mg melatonin were greater than placebo after exercise (p = 0.045) and less than placebo for SST. No significant differences occurred for IGF-1; however, males were shown to have higher levels of IGFBP-1 independent of supplementation (p = 0.004). The 5.0 mg melatonin dose resulted in higher IGFBP-3 in males (p = 0.017). In conclusion, for males 5.0 mg melatonin appears to increase serum GH while concomitantly lowering SST levels; however, when combined with resistance exercise both melatonin doses positively impacts GH levels in a manner not entirely dependent on SST.     

INTEGRATING ALBEMARLE RESOLVE DESULFURIZATION TECHNOLOGY WITH NOVEL PETRO-CANADA PROCESS CONCEPTS IN COMMERCIAL FCCU OPERATIONS

The gasoline and distillate sulfur regulations promulgated throughout the world to reduce tail-pipe emissions are now strongly impacting refinery operations and investments. FCC gasoline is recognized as the principal contributor of sulfur to the gasoline pool and has become the focus for meeting the new specifications. The difficulty in removing sterically hindered sulfur species in the fluid catalytic cracking unit (FCCU) cycle oil drives up the hydrogen and investment costs for treating the distillates. Although installation of pre- and post-treatment facilities is planned by many refiners, other non-capital approaches such as undercutting are being evaluated to meet interim and future sulfur levels. Even when expensive treatment facilities are installed, operating costs can be lowered and the flexibility of the facility increased with improvements in the ability to remove sulfur in the FCCU. In this article, we detail Petro-Canada's experience in integrating Albemarle's RESOLVE sulfur reduction technology with a combination of innovative process ideas. These concepts include heavy naphtha recycle, coprocessing of hydrogen donor feeds, and recycle of light cycle oil (LCO) to a specially designed stripper reactor. Special attention is paid to the interaction of deep FCC feed hydrodesulfurization with the FCC performance. The results demonstrate that very low FCC gasoline sulfur levels can be achieved without significant capital investment through novel approaches to recycle, creative integration of cat feed hydrotreating unit (CFHTU)-FCCU designs and operations, and application of state-of-the-art sulfur reduction additive technology. An added benefit of the RESOLVE 950 sulfur reduction technology is the substantial elimination of sulfur oxides in the FCC flue gas. This has been observed in Petro-Canada operations and numerous other RESOLVE 950 applications around the world.     

Arylidene polymers. XVIII. Synthesis and thermal behavior of organometallic arylidene polyesters containing ferrocene derivatives in the main chain

A new interesting category of organometallic polyesters based on diarylidenecycloalkanones containing ferrocene derivatives in the polymer main chain has been prepared by interfacial polycondensation of 1,1′-dichlorocarbonyl ferrocene or 1,1′-dichlorocarbonyl-4,4′-diiodoferrocene with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzylidene)cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene) cycloheptanone. The resulting polyesters were characterized by elemental analyses, infrared spectroscopy, solubility, and viscometry measurements. The thermal behavior of the synthesized polymers was evaluated by thermal gravimetric analysis and correlated with their structures. The crystallinity of all polymers were examined by x-ray diffraction analysis. Moreover, the electrical conductivity of a selected example of polymer was investigated above the temperature range (300–500 K) and showed that it followed an Arrhenius-type equation with activation energy 2.09 eV. © 1993 John Wiley & Sons, Inc.     

Combinatorial chemistry methods for coating development: VI. Correlation of high throughput screening methods with conventional measurement techniques

Combinatorial chemistry has proven to be a valuable tool for the development of new compounds. In the pharmaceutical industry, where combinatorial chemistry began, the approach has been instrumental in the high-speed development of new drugs. Due to the overwhelming success of the combinatorial methodology in the pharmaceutical industry, it has been recently applied to materials development. We have recently developed a combinatorial factory capable of preparing and evaluating on the order of 100 organic clear coatings in a day.

One of the most challenging aspects of the creation of the combinatorial factory was the development of the high throughput screening (HTS) methods for the primary coating properties of interest such as optical clarity, abrasion resistance, adhesion, and weatherability. For each property, an entirely new method was developed that allowed for rapid measurement of these properties on very small samples. This paper describes various aspects of the development of these novel measurement systems including the correlation of the HTS methods with conventional, industry standard measurement methods.     

Platinum-group metal cyclodextrin complexes and their use as command-cure catalysts in silicones

The Command-Cure concept is defined for a curable formulation as one with long work-like at ambient temperature and rapid cure time at elevated temperature. This concept is explored for a curable silicone system, cured via hydrosilylation. CODMCl₂ complexes (COD=1.5-cyclo-octadiene:M=Pt. Pd) are reacted with beta-cyclodextrin (-CD) to make 11 inclusion compounds,M=Pd.2;M=Pt.4. Compounds2 and4 were analyzed by¹H NMR and X-ray powder diffraction. Their catalytic ability was evaluated in a model system as well as a polymeric system that gels upon cure. Surprisingly, the Pd analog2 was a good command-cure catalyst whereas the guest compound CODPdCl₂,1, was not active in the hydrosilylation reaction. The Pt analog,4, was an effective command-cure catalyst while the corresponding guest. CODPtCl₂,3, was too active at low temperature in the hydrosilylation reaction. Additional Pt compounds and one Rh inclusion compound were evaluated as command cure catalysts. These inclusion compounds were: 11 -CD:[CODRhCl]₂,5: 11 -CD:CpPtMe₃,6 (Cp=cyclopentadienyl): 12 -CD:MeCpPtMe₃,7; 12 -CO:CODPtMe₂,8. The effectiveness of4 8 was evaluated in a number of silicone systems.     

Flow distribution in spiral mandrel dies

An analysis of flow of a power law fluid in a spiral mandrel die is presented. The analysis is applied to study the effect of various die design parameters on the flow distribution at the end of the spiral mandrel section. Three variables that have a very strong effect on the flow distribution are the number of grooves, the initial clearance, and the groove helix angle. The distribution is improved by increasing the number of grooves, by using a non-zero initial clearance, and a relatively small helix angle. Two more variables that have a significant effect on the flow distribution are the taper angle and the initial groove depth. The optimum taper angle was found to be between 1 and 3 degrees. The distribution uniformity improves with the initial groove depth, while the pressure drop reduces at the same time.     

Assessing the reliability of ordered categorical scales using kappa-type statistics

Methods for the analysis of reliability of ordered categorical scales are discussed, focussing on the limitation of the single summary-weighted kappa coefficients. A symmetric matrix of kappa-type coefficients is suggested as an alternative. The method is proposed as being suitable for ordinal scale where there is no underlying continuum. Their application is illustrated using two data sets from reliability studies. If, instead, distances between categories can be specified, a weighted mean of the matrix terms can be used as a summary measure. This is equal to a weighted kappa coefficient with squared weights, provided distances between adjacent categories are equal. When a study design corresponds to a one-way random effects model, estimates of precision of kappa-type coefficient, including the coefficients described here, can be obtained using the delta-method, bootstrap resampling by subjects or jack-knifing by subjects. In the case of interobserver reliability studies, where there may be systematic differences between observers, the investigator may wish to generalise to a population of observers and subjects. In this case, jack-knifing by observer and subject is suggested. Empirical comparisons are made between standard error estimates based on the delta-method, on jack-knifing by subjects and a two-way jack-knife by subjects and observers. The results suggest that standard errors based on the delta-method or jack-knifing by subject alone may be overly precise.