Compact holographic storage demonstrator with rapid access

We discuss the design of a complete, compact holographic storage demonstrator based on a combination of spatial and angular multiplexing and using acousto-optic deflectors for rapid nonmechanical access. We also describe the implementation of this design and preliminary results of both the analog storage and the retrieval of 20,000 holograms in twenty 1-mm-thick layers of a lithium niobate crystal and of the digital storage and error-free retrieval of color images by using error-correcting techniques.     

Infrared temperature measurement in the ear canal with the DIATEK 9000 Instatemp and the DIATEK 9000 Thermoguide. Comparison with methods of temperature measurement in other body parts

Temperature of the tympanic membrane is recommended as a "gold standard" of core-temperature recording. However, use of temperature probes in the auditory canal may lead to damage of tympanic membrane. Temperature measurement in the auditory canal with infrared thermometry does not pose this risk. Furthermore it is easy to perform and not very time-consuming. For this reason infrared thermometry of the auditory canal is becoming increasingly popular in clinical practice. We evaluated two infrared thermometers-the Diatek 9000 Thermoguide and the Diatek 9000 Instatemp-regarding factors influencing agreement with conventional tympanic temperature measurement and other core-temperature recording sites. In addition, we systematically evaluated user dependent factors that influence the agreement with the tympanic temperature. MATERIALS AND METHODS: In 20 volunteers we evaluated the influence of three factors: duration of the devices in the auditory canal before taking temperature (0 or 5 s), interval between two following recordings (30, 60, 90, 120, 180 s) and positioning of the grip relative to the auditory-canal axis (0, 60, 180 and 270 degrees). Agreement with tympanic contact probes (Mon-a-therm tympanic) in the contralateral ear was investigated in 100 postoperative patients. Comparative readings with rectal (YSI series 400) and esophageal (Mon-a-therm esophageal stethoscope with temperature sensor) probes were done in 100 patients in the ICU. The method of Bland and Altman was taken for comparison. RESULTS: Shortening of the interval between two consecutive readings led to increasing differences between the two measurements with the second reading decreasing. A similar effect was seen when positioning the infrared thermometers in the auditory canal before taking temperatures: after 5 s the recorded temperatures were significantly lower than temperature recordings taken immediately. Rotation of the devices out of the telephone handle position led to increasing lack of agreement between infrared thermometry and contact probes. Mean differences between infrared thermometry (Instatemp and Thermoguide, CAL-Mode) and tympanic probes were -0.41 +/- 0.67 degree C (2 SD) and -0.43 +/- 0.70 degree C, respectively. Mean differences between the Thermoquide (Rectal-Mode) and rectal probe were -0.19 +/- 0.72 degree C, and between the Thermoguide (Core Mode) and esophageal probe -0.13 +/- 0.74 degree C. DISCUSSION: Although easy to use, infrared thermometry requires careful handling. To obtain optimal recordings, the time between two consecutive readings should not be less than two min. Recordings should be taken immediately after positioning the devices in the auditory canal. Best results are obtained in the 60 degrees position with the grip of the devices following the ramus mandibulae (telephone handle position). The lower readings of infrared thermometry compared with tympanic contact probes indicate that the readings obtained represent the temperature of the auditory canal rather than of the tympanic membrane itself. To compensate for underestimation of core temperature by infrared thermometry, the results obtained are corrected and transferred into core-equivalent temperatures. This data correction reduces mean differences between infrared recordings and traditional core-temperature monitoring, but leaves limits of agreement between the two methods uninfluenced.     

Supporting rapid design and evaluation of pervasive applications: challenges and solutions

Along with the improvement of the key technologies for pervasive computing, the design of applications itself has emerged as a notable research area. A design should decide which features go into the application of supporting its context-awareness and ascertaining how well those features add value for users with an acceptable user experience. This paper initially identifies the challenges in designing and evaluating pervasive applications. It then presents a condensed survey of prototyping techniques and existing toolkits with the aim of understanding how the design issues have been addressed by research prototypes. At the end, we describe various open issues with suggestions of possible ways to extend the capabilities of current prototyping toolkits.     

On regular temporal logics with past

The IEEE standardized Property Specification Language, PSL for short, extends the well-known linear-time temporal logic LTL with so-called semi-extended regular expressions. PSL and the closely related SystemVerilog Assertions, SVA for short, are increasingly used in many phases of the hardware design cycle, from specification to verification. In this article, we extend the common core of these specification languages with past operators. We name this extension PPSL. Although all ω-regular properties are expressible in PSL, SVA, and PPSL, past operators often allow one to specify properties more naturally and concisely. In fact, we show that PPSL is exponentially more succinct than the cores of PSL and SVA. On the star-free properties, PPSL is double exponentially more succinct than LTL. Furthermore, we present a translation of PPSL into language-equivalent nondeterministic Büchi automata, which is based on novel constructions for 2-way alternating automata. The upper bound on the size of the resulting nondeterministic Büchi automata obtained by our translation is almost the same as the upper bound for the nondeterministic Büchi automata obtained from existing translations for PSL and SVA. Consequently, the satisfiability problem and the model-checking problem for PPSL fall into the same complexity classes as the corresponding problems for PSL and SVA.     

Soil moisture estimation over vegetated terrains using multitemporal remote sensing data

A new method for retrieving soil moisture content over vegetated fields, employing multitemporal radar and optical images, is presented. It is based on the integration of the temporal series of radar data within an inversion scheme and on the correction of the vegetation effects. The retrieval algorithm uses the Bayesian maximum posterior probability and assumes the existence of a relation among the soil conditions at the different times of the series. The correction of the vegetation effects models the variation, with respect to the initial time of the series, of the component of the backscattering coefficient due to the soil characteristics as function of the variations of the measured backscattering coefficient and of the biomass. The method is tested on the data acquired throughout the SMEX02 experiment. The results show that measured and estimated soil moistures are fairly well correlated and that the performances of multitemporal retrieval algorithm are better than those obtained by employing one radar acquisition, especially in terms of capability to detect soil moisture changes. Although the approach to correct the vegetation effects on radar observations needs to be further assessed on different sets of data, this finding demonstrates that the proposed method has a potential to improve the quality of the soil moisture retrievals.     

Tight analysis of the (1+1)-EA for the single source shortest path problem

We conduct a rigorous analysis of the (1+1) evolutionary algorithm for the single source shortest path problem proposed by Scharnow, Tinnefeld, and Wegener (The analyses of evolutionary algorithms on sorting and shortest paths problems, 2004, Journal of Mathematical Modelling and Algorithms, 3(4):349-366). We prove that with high probability, the optimization time is O(n2 max{?, log(n)}), where ? is the smallest integer such that any vertex can be reached from the source via a shortest path having at most ? edges. This bound is tight. For all values of n and ? we provide a graph with edge weights such that, with high probability, the optimization time is of order Ω(n2 max{?, log(n)}). To obtain such sharp bounds, we develop a new technique that overcomes the coupon collector behavior of previously used arguments. Also, we exhibit a simple Chernoff type inequality for sums of independent geometrically distributed random variables, and one for sequences of random variables that are not independent, but show a desired behavior independent of the outcomes of the previous random variables. We are optimistic that these tools find further applications in the analysis of evolutionary algorithms.     

GPU-based real-time approximation of the ablation zone for radiofrequency ablation

Percutaneous radiofrequency ablation (RFA) is becoming a standard minimally invasive clinical procedure for the treatment of liver tumors. However, planning the applicator placement such that the malignant tissue is completely destroyed, is a demanding task that requires considerable experience. In this work, we present a fast GPU-based real-time approximation of the ablation zone incorporating the cooling effect of liver vessels. Weighted distance fields of varying RF applicator types are derived from complex numerical simulations to allow a fast estimation of the ablation zone. Furthermore, the heat-sink effect of the cooling blood flow close to the applicator's electrode is estimated by means of a preprocessed thermal equilibrium representation of the liver parenchyma and blood vessels. Utilizing the graphics card, the weighted distance field incorporating the cooling blood flow is calculated using a modular shader framework, which facilitates the real-time visualization of the ablation zone in projected slice views and in volume rendering. The proposed methods are integrated in our software assistant prototype for planning RFA therapy. The software allows the physician to interactively place virtual RF applicator models. The real-time visualization of the corresponding approximated ablation zone facilitates interactive evaluation of the tumor coverage in order to optimize the applicator's placement such that all cancer cells are destroyed by the ablation.     

Distance visualization for interactive 3D implant planning

An instant and quantitative assessment of spatial distances between two objects plays an important role in interactive applications such as virtual model assembly, medical operation planning, or computational steering. While some research has been done on the development of distance-based measures between two objects, only very few attempts have been reported to visualize such measures in interactive scenarios. In this paper we present two different approaches for this purpose, and we investigate the effectiveness of these approaches for intuitive 3D implant positioning in a medical operation planning system. The first approach uses cylindrical glyphs to depict distances, which smoothly adapt their shape and color to changing distances when the objects are moved. This approach computes distances directly on the polygonal object representations by means of ray/triangle mesh intersection. The second approach introduces a set of slices as additional geometric structures, and uses color coding on surfaces to indicate distances. This approach obtains distances from a precomputed distance field of each object. The major findings of the performed user study indicate that a visualization that can facilitate an instant and quantitative analysis of distances between two objects in interactive 3D scenarios is demanding, yet can be achieved by including additional monocular cues into the visualization.