Synthesis,Chiral Separation,Absolute Configuration Assignment,and Biological Activity of Enantiomers of Retro‐1 as Potent Inhibitors of Shiga Toxin

The Shiga toxin (Stx) family is composed of related protein toxins produced by the bacteria Shigella dysenteriae and certain pathogenic strains of E. coli. No effective therapies for Stx intoxication have been developed yet. However, inhibitors that act on the intracellular trafficking of these toxins may provide new options for the development of therapeutic strategies. This study reports the synthesis, chromatographic separation, and pharmacological evaluation of the two enantiomers of Retro‐1, a compound active against Stx and other such protein toxins. Retro‐1 works by inhibiting retrograde transport of these toxins inside cells. In vitro experiments proved that the configuration of the stereocenter at position 5 is not crucial for the activity of this compound. X‐ray diffraction data revealed (S)‐Retro‐1 to be slightly more active than (R)‐Retro‐1.     

Structural Insight into the Complex of Ferredoxin and [FeFe] Hydrogenase from Chlamydomonas reinhardtii

The transfer of photosynthetic electrons by the ferredoxin PetF to the [FeFe] hydrogenase HydA1 in the microalga Chlamydomonas reinhardtii is a key step in hydrogen production. Electron delivery requires a specific interaction between PetF and HydA1. However, because of the transient nature of the electron‐transfer complex, a crystal structure remains elusive. Therefore, we performed protein–protein docking based on new experimental data from a solution NMR spectroscopy investigation of native and gallium‐substituted PetF. This provides valuable information about residues crucial for complex formation and electron transfer. The derived complex model might help to pinpoint residue substitution targets for improved hydrogen production.     

Copper‐Catalyzed Asymmetric Conjugate Addition of Dimethylzinc to Acyl‐N‐methylimidazole Michael Acceptors: Scope,Limitations and Iterative Reactions

An efficient copper‐catalyzed enantioselective conjugate addition of dimethylzinc to unsaturated 2‐acyl‐N‐methylimidazoles has been achieved using a chiral bidentate hydroxyalkyl‐NHC ligand. The reactions proceed with excellent regioselectivity (1,4 vs. 1,6 and 1,8) in extended conjugated systems to afford the 1,4‐adducts in high enantioselectivities. This regioselectivity could be ascertained by DFT studies highlighting the crucial role of the imidazole ring. Thanks to the development of efficient protocols to regenerate the unsaturated 2‐acyl‐N‐methylimidazole moiety, an iterative process has been developed ultimately leading to 3,5,7 all‐syn or anti‐anti polydeoxypropionate stereodiads.

     

Metal‐Free Synthesis of Chlorinated β‐Amino Ketones via an Unexpected Reaction of Imines with Arylacetylenes in 1,1,1,3,3,3‐Hexafluoro‐2‐propanol

The metal‐free reaction of terminal arylacetylenes with α,α‐dichloroaldimines in 1,1,1,3,3,3‐hexafluoro‐2‐propanol as the sole solvent results in the rapid and selective formation of γ,γ‐dichloro‐β‐amino ketones. In this solvent the expected dichlorinated propargylamines and/or allylic amines are not formed. The dichloromethylene moiety of the aldimine acts as an activating group and is essential to accomplish this transformation. Electron‐rich acetylenes lead to the best results and work well with all imines (with or without α′‐H at the nitrogen substituent), while electron‐deficient acetylenes only reacted with N‐tert‐butylaldimines (no α′‐H). The mechanistic pathway showed 1,1,1,3,3,3‐hexafluoro‐2‐propanol to protonate the aldimine, which in the rate‐determining step will react with the arylacetylene to form a resonance‐stabilized allene cation, which is trapped by a HFIP molecule giving rise to an enol ether, which promptly hydrolyzes to furnish exclusively the β‐amino ketones. Using DFT techniques we found that the first C C bond forming step is the rate‐determining step and is associated with a barrier of about 21 kcal mol⁻¹.

     

Project management deployment: The role of cultural factors

This paper investigates the role of cultural factors as possible partial explanation of the disparity in terms of project management deployment observed between various studied countries. The topic of culture has received increasing attention in the management literature in general during the last decades and in the project management literature in particular during the last few years. The globalization of businesses and worldwide Governmental/International organizations collaborations drives this interest in the national culture to increase more and more. Based on Hofstede national culture framework, the study hypothesizes and tests the impact of the culture and development of the country on the PM deployment. Seventy-four countries are selected to conduct a correlation and regression analysis between Hofstede’s national culture dimensions and the used PM deployment indicator. The results show the relations between various national culture dimensions and development indicator (GDP/Capita) on the project management deployment levels of the considered countries.     

Hydrodynamic characteristics of gas–solid fluidization at high temperature

Effect of temperature on the hydrodynamics of bubbling gas–solid fluidized beds was investigated in this work. Experiments were carried out at different temperatures ranged of 25–600°C and different superficial gas velocities in the range of 0.17–0.78 m/s with sand particles. The time‐position trajectory of particles was obtained by the radioactive particle tracking technique at elevated temperature. These data were used for determination of some hydrodynamic parameters (mean velocity of upward and downward‐moving particles, jump frequency, cycle frequency, and axial/radial diffusivities) which are representative to solids mixing through the bed. It was shown that solids mixing and diffusivity of particles increases by increasing temperature up to around 300°C. However, these parameters decrease by further increasing the temperature to higher than 300°C. This could be attributed to the properties of bubble and emulsion phases. Results of this study indicated that the bubbles grow up to a maximum diameter by increasing the temperature up to 300°C, after which the bubbles become smaller. The results showed that due to the wall effect, there is no significant change in the mean velocity of downward‐moving clusters. In order to explain these trends, surface tension of emulsion between the rising bubble and the emulsion phase was introduced and evaluated in the bubbling fluidized bed. The results showed that surface tension between bubble and emulsion is increased by increasing temperature up to 300°C, however, after that it acts in oppositely.     

Lead isotopic composition of fly ash and flue gas residues from municipal solid waste combustors in France: implications for atmospheric lead source tracing

Fly ash and flue gas residues from eight municipal solid waste combustors (MSWC) in France (1992--93 and 1998/ 2002) were analyzed for their Pb isotopic composition. Fly ashes are more representative of solid residual particles, whereas flue gas residues reflect mostly the composition of gas phases. Both sample types contain hundreds to thousands of micrograms of metals per gram. Leaching experiments showed that metals are present in condensed phases, probably as sulfates and chlorides, and suggest that Cd, Pb, and Zn are highly fractionated from one another during volatilization/condensation processes occurring during combustion. Although all the samples analyzed define a fairly restricted range in Pb isotopic compositions (206Pb/207Pb = 1.148-1.158 and 208Pb/206Pb = 2.101-2.114) compared to other environmental samples, some MSWC produce materials having distinct isotopic compositions, whereas others display very similar ones. Isotopic heterogeneity is also measured between samples from a single MSWC. This is interpreted as resulting from the heterogeneity of the waste source materials. The range of Pb isotopic composition of incinerator materials form a well-defined linear array in the 208Pb/206Pb versus 206Pb/207Pb diagram. This array is compatible with the previously reported European standard pollution (ESP) line and most probably represent the average lead isotopic composition of industrial atmospheric emissions in France, with the following ratios: 206Pb/207Pb = 1.154+/-0.003 and 208Pb/206Pb = 2.107+/-0.003 (1sigma).     

Structure and Technofunctional Properties of Protein-Polysaccharide Complexes: A Review

Food proteins and polysaccharides are the two key structural entities in food materials. Generally, interactions between proteins and polysaccharides in aqueous media can lead to one- or two-phase systems, the latter being generally observed. In some cases of protein-polysaccharide net attraction, mainly mediated through electrostatic interactions, complex coac-ervation or associative phase separation occurs, giving rise to the formation of protein-polysac-charide complexes. Physicochemical factors such as pH, ionic strength, ratio of protein to polysaccharide, polysaccharide and protein charge, and molecular weight affect the formation and stability of such complexes. Additionally, the temperature and mechanical factors (pressure, shearing rate, and time) have an influence on phase separation and time stability of the system. The protein-polysacchaide complexes exhibit better functional properties than that of the proteins and polysaccharides alone. This improvement could be attributed to the simultaneous presence of the two biopolymers, as well as the structure of the complexes. Consequently, the interesting hydration (solubility, viscosity), structuration (aggregation, gelation) and surface (foaming, emulsifying) properties of these complexes can be used in a number of domains. Among others, these could be macromolecular purification, microencapsulation, food formulation (fat replacers, texturing agents), and synthesis of biomaterials (edible films, artificial grafts).     

Cover Image,Volume 98, Issue 11

The cover image, by Ciara Duffy et al., is based on the Research Article In vitro evaluation of chitosan copper chelate gels as a multimicronutrient feed additive for cattle, DOI: 10.1002/jsfa.8939 .

     

A constitutive model for granular materials considering grain breakage

A particle breakage has a significant impact on the mechanical behavior of granular materials. In this paper, we present an elasto-plastic model with two yield surfaces to which the influence of particle breakage has been introduced. The main feature of this model is to incorporate the change in the critical state line (CSL) consequent to the grain breakage induced by isotropic and deviatoric stresses during loading. For this purpose we propose a breakage function which connects the evolution of the CSL to ...