Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Loss performance of tagged and normal ATM cells at a partiallyshared buffer

The loss performance of tagged and normal ATM cells at a first-in-first-out (FIFO) buffer is studied. The authors show that if a partial buffer sharing mechanism is adopted the loss probability of normal cells can be firmly guaranteed, regardless of the traffic intensity of tagged cells     

Comparison of Markov model and fault tree approach in determining initiating event frequency for systems with two train configurations

This study explores the use of Markov models in some areas of systems analysis in which time evolution of the system may be a significant factor in influencing the system reliability or availability. Comparisons are made between the Markov models and the time-averaged fault tree models for determining support system failure initiating event frequency in a nuclear power plant, for both power and shutdown conditions. Factors affecting consistency between the fault tree approach and the Markov model approach are studied for systems with common two train configurations. A correlation is developed to estimate the ratio between initiator frequencies through both approaches for a two parallel component system. Insights are developed as to when time averaged and simplified fault tree models support a good approximation to the more rigorous time-dependent Markov models.     

Rectilinear steiner tree heuristics and minimum spanning tree algorithms using geographic nearest neighbors

We study the application of the geographic nearest neighbor approach to two problems. The first problem is the construction of an approximately minimum length rectilinear Steiner tree for a set ofn points in the plane. For this problem, we introduce a variation of a subgraph of sizeO(n) used by YaO [31] for constructing minimum spanning trees. Using this subgraph, we improve the running times of the heuristics discussed by Bern [6] fromO(n ² log n) toO(n log² n). The second problem is the construction of a rectilinear minimum spanning tree for a set ofn noncrossing line segments in the plane. We present an optimalO(n logn) algorithm for this problem. The rectilinear minimum spanning tree for a set of points can thus be computed optimally without using the Voronoi diagram. This algorithm can also be extended to obtain a rectilinear minimum spanning tree for a set of nonintersecting simple polygons.The results in this paper are a part of Y. C. Yee's Ph.D. thesis done at SUNY at Albany. He was supported in part by NSF Grants IRI-8703430 and CCR-8805782. S. S. Ravi was supported in part by NSF Grants DCI-86-03318 and CCR-89-05296.     

Dual-Mode Microstrip Open-Loop Resonators and Filters

A miniature dual-mode microstrip open-loop resonator is proposed. Distinct characteristics of this new type of dual-mode resonator are investigated using full-wave electromagnetic simulations. It is shown that the two operating modes, i.e., the even and odd modes, within a single dual-mode resonator of this type do not couple. It is also found that there is a finite-frequency transmission zero inherently associated with the even mode. Two two-pole filters using this type of dual-mode resonator are demonstrated with opposite asymmetric responses, which result from different locations of the transmission zero. Higher order filters of this type are also investigated. Both simulated and measured results are presented.     

Effects of ternary additions on the thermoelastic martensitic transformation of NiAl

Nickel-rich β-NiAl alloys, which are potential materials for high-temperature shape-memory alloys, show a thermoelastic martensitic transformation, which produces their shape memory effect. However, the transformation to Ni₅Al₃ phase during heating of NiAl martensite can interrupt the reversible martensitic transformation; consequently, the shape memory effect in NiAl martensite might not appear after heating. The phase transformation process in binary Ni-(34 to 37)Al martensite was investigated by differential thermal analysis (DTA) method, and we found that the condition of reversible martensitic transformation was not the β → Ni₅Al₃ transformation, but rather the M → Ni₅Al₃ transformation occurring at 250 °C to 300 °C. Therefore, the transformation temperature of M → Ni₅Al₃ determined the highest operating temperature for the shape memory effect. For verifying the critical temperature, the phase transformation process was investigated for eight ternary Ni-33Al-X alloys (X=Cu, Co, Fe, Mn, Cr, Ti, Si, and Nb). Only Ti, Si, and Nb additions were found to be effective in dropping the M _s temperature, and they facilitated the shape memory effect in Ni-33Al-X alloys. In particular, the addition of Si and Nb raised the transformation temperature of M → Ni₅Al₃, a potentially beneficial effect for shape memory at higher temperatures. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

A compact LTCC branch-line coupler UsingModified-T equivalent-circuit modelfor transmission line

In this letter, a compact branch-line coupler is proposed by making good use of the three-dimensional layout capability of the low-temperature co-fired ceramic (LTCC) substrate. This branch-line coupler is accomplished by using lumped-inductors and lumped-capacitors to realize the modified-T equivalent-circuit model for the transmission line so that the circuit size may drastically be reduced. Specifically, a very compact LTCC branch-line coupler with a size of 0.079/spl lambda//spl times/0.0717/spl lambda/ is implemented and carefully examined, where /spl lambda/ is the wavelength of the multilayer structure at the operating frequency f/sub 0/.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.