Smoke gas analysis by Fourier transform infrared spectroscopy – summary of the SAFIR project results

The determination of toxic components from fire gases is difficult because the environment is hot, reactions are often temperature dependent, and a lot of soot may be produced. Due to the different properties of the gas components, a different time‐consuming procedure for each species has traditionally been used. The use of FTIR (Fourier transform infrared) spectrometers as a continuous monitoring technique overcomes many of the problems in smoke gas analyses. FTIR offers an opportunity to set up a calibration and prediction method for each gas showing a characteristic spectral band in the infrared region of the spectrum. The objective of the SAFIR project was to further develop the FTIR gas analysis of smoke gases to be an applicable and reliable method for the determination of toxic components in combustion gases related to fire test conditions. The optimum probe design, filter parameters and the most suitable sampling lines in terms of flow rate, diameter, construction material and operating temperature have been specified. In the large scale, special concern was given to the probe design and the effects of the probe location as well as practical considerations of the sampling line length. Quantitative calibration and prediction methods have been constructed for different components present in smoke gases. Recommendations on how to deal with interferents, non‐linearities and outliers have been provided and a verification method for the spectrometer for unexpected variations and for the different models have been described. FTIR measurement procedures in different fire test scenarios have been studied using the recommendations of this project for measurement techniques and analysis and an interlaboratory trial of the FTIR technique in smoke gas analysis was carried out to define the repeatability and reproducibility of the method in connection with a small scale fire test method, the cone calorimeter. Copyright © 2000 John Wiley & Sons Ltd.     

On the observation of inductive high-frequency impedance behaviour during the electrodeposition of Au—Sn alloys

Inductive high-frequency impedance behaviour is often observed in metal electrodeposition systems. This behaviour is typically attributed to equipment limitations or non-idealities in the cell set-up and electrical connections. Such instrumental artefacts would nevertheless be relevant to a frequency range which is expected to be well above that in which inductive behaviour is in fact observed (down to a few tens of Hz). In this paper some results on an acidic Au—Sn electrodeposition system are reported. Electrochemical impedance and potentiostatic transients were measured. These results suggest that the high-frequency inductive behaviour may be related to metal nucleation processes. A correlation is proposed between the pseudo-inductive potentiostatic nucleation transients and the pseudo-inductive behaviour of the impedance spectra.     

Chain conformations of syndiotactic poly(m-methylstyrene) in the crystalline state

A conformational energy analysis of the isolated chain of syndiotactic poly(m-methylstyrene) under the constraint of a crystalline field is reported. Two different minimum energy conformations having similar energy have been found; the trans-planar conformation with tcm symmetry and the two-fold helical conformation with s(2/1)2 symmetry, according with the observed polymorphic behavior of this polymer. The calculated chain axes are in agreement with the experimental axes of 5.1 and 7.9 Å found for the different polymorphic forms of syndiotactic poly(m-methylstyrene). However, only a metastable disordered modification (form III) having chains in trans-planar conformation has been described. This indicates that, even though the trans-planar conformation is, in the isolated chain as stable as the helical conformation, the packing of the chains in helical conformation is probably more efficient than that of the trans-planar chains.     

Interlaboratory study on lipid oxidation during accelerated storage trials with rapeseed and sunflower oil analyzed by conjugated dienes as primary oxidation products

Accelerated storage tests are frequently used to assess the oxidative stability of foods and related systems due to its reproducibility. Various methods and experimental conditions are used to measure lipid oxidation. Differences between laboratories make it necessary to determine the repeatability and reproducibility of oxidation tests performed under the same conditions. The objective of the present interlaboratory study was to evaluate the outcome of a storage test for two different bulk oils, sunflower oil (SFO) and rapeseed oil (RSO), during a period of 9 weeks at 20°C, 30°C, 40°C, and 60°C. Sixteen laboratories were provided with bottled oils and conducted the storage tests according to a detailed protocol. Lipid oxidation was monitored by the formation of conjugated dienes (CD) and the activation energy (E_a) was determined for comparative purposes and statistically evaluated. An increase in CD formation was observed for both oils when the storage temperature was increased in all laboratories. The E_a,1 ranged from 47.9 to 73.3 kJ mol⁻¹ in RSO and from 27.8 to 62.6 kJ mol⁻¹ in SFO, with average values of 58.2 and 46.8 kJ mol⁻¹, respectively. The reproducibility coefficients were 10.9% and 18.2% for RSO and SFO, respectively. Practical applications: In order to compare results on oxidative stability of foods derived from different studies, the reproducibility of storage tests and methods employed to evaluate the oxidation level should be considered. This study provides fundamental data on the reproducibility of lipid oxidation under accelerated storage conditions and defines important parameters to be considered for the conduction of experiments.     

CORRELATION AND PREDICTION OF VLE OF WATER + CONGENER MIXTURES FOUND IN ALCOHOLIC BEVERAGES USING AN ARTIFICIAL NEURAL NETWORK

Artificial neural networks have been used for the correlation and prediction of vapor-liquid equilibrium data of binary water mixtures found in alcoholic beverage production. The main interest of the study is the accurate modeling of the bubble pressure and concentration of congeners in the vapor phase (substances different from ethanol and water), considered to be an important enological parameter in the alcoholic industry. Nine binary water + congener mixtures were considered for analysis. Vapor-liquid equilibrium data of these systems were taken from the literature (333 data points for training and 111 data points for testing), the artificial neural network results were compared with available literature data, and the accuracy of the modeling is discussed. The study shows that the neural network model is a good alternative method for the estimation of phase equilibrium properties for this type of mixture.

Supplemental materials are available for this article. Go to the publisher's online edition of Chemical Engineering Communications to view the free supplemental file. http://www.informaworld.com/smpp/title~db=all~content=t713454788     

Synthesis and Characterizations of Melamine-Based Epoxy Resins

A new, easy and cost-effective synthetic procedure for the preparation of thermosetting melamine-based epoxy resins is reported. By this innovative synthetic method, different kinds of resins can be obtained just by mixing the reagents in the presence of a catalyst without solvent and with mild curing conditions. Two types of resins were synthesized using melamine and a glycidyl derivative (resins I) or by adding a silane derivative (resin II). The resins were characterized by means of chemical-physical and thermal techniques. Experimental results show that all the prepared resins have a good thermal stability, but differ for their mechanical properties: resin I exhibits remarkable stiffness with a storage modulus value up to 830 MPa at room temperature, while lower storage moduli were found for resin II, indicating that the presence of silane groups could enhance the flexibility of these materials. The resins show a pot life higher than 30 min, which makes these resins good candidates for practical applications. The functionalization with silane terminations can be exploited in the formulation of hybrid organic-inorganic composite materials.