Unified Analysis of Single Machine Equivalent and Trajectory Sensitivity to Formulate a Novel Transient Stability-constrained Optimal Power Flow Approach

Abstract—This article proposes a new transient stability constraint that permits quantifying the degree of instability of a power system from the active power dispatched by generators. Based on this constraint, which is derived from both single machine equivalent and trajectory sensitivity methods, a new transient stability-constrained optimal power flow is formulated in the Euclidian space to preventively control the transient stability in realistic power systems. The validity and the effectiveness of the proposed method are numerically demonstrated in the WSCC 3-machine, 9-bus and Mexican 46-machine, 190-bus systems.     

Correlation of animal diet and fatty acid content in young goat meat by gas chromatography and chemometrics

The meat fatty acids (FA) profiles of caprines submitted to different dietary treatments were determined by gas chromatography. The data were treated by Chemometrics to consider all variables together. The contents of saturated FA (SFA), monounsaturated FA (MUFA), polyunsaturated FA (PUFA), omega-3 (n-3) FA, and omega-6 (n-6) FA in 32 samples were analyzed. PUFA:SFA and n-6:n-3 ratios were also considered. The multivariate methods of hierarchical cluster analysis (HCA) and principal component analysis (PCA) were used to analyze the experimental results. HCA can group samples according to their basic composition, and PCA can explain the relationship among the dietary treatments according to the meat fatty acid composition. Treatment 1 presented the highest n-6 FA concentration, PUFA:SFA, and n-6:n-3 ratios, and the lowest MUFA and n-3 concentrations. Opposite results were observed for treatment 4. Treatments 2 and 3 were highly similar with differences mainly in SFA and MUFA concentrations.     

Piecewise linear second moment statistical simulation of ICs affected by non‐linear statistical effects

This paper presents a methodology for statistical simulation of non‐linear integrated circuits affected by device mismatch. This simulation technique is aimed at helping designers maximize yield, since it can be orders of magnitude faster than other readily available methods, e.g. Monte Carlo. Statistical analysis is performed by modeling the electrical effects of tolerances by means of stochastic current or voltage sources, which depend on both device geometry and position across the die. They alter the behavior of both linear and non‐linear components according to stochastic device models, which reflect the statistical properties of circuit devices up to the second order (i.e. covariance functions). DC, AC, and transient analyses are performed by means of the stochastic modified nodal analysis, using a piecewise linear stochastic technique with respect to the stochastic sources, around a few automatically selected points. Several experimental results on significant circuits, encompassing both the analog and the digital domains, prove the effectiveness of the proposed method. Copyright © 2009 John Wiley & Sons, Ltd.     

Multi-parameter trajectory sensitivity approach for location of series-connected controllers to enhance power system transient stability

Determining suitable locations of series-connected controllers is a practical problem when it is necessary to install them in modern power systems. The aim of this paper is to find the best location of series controllers in order to reduce the proximity to instability of a current operating point of a power system, from a transient stability viewpoint. In order to achieve this goal, a general approach has been developed based on an index of proximity to instability and trajectory sensitivity analysis. An efficient way to carry out multi-parameter sensitivities is formulated analytically and solved simultaneously with the set of differential-algebraic equations representing power system's dynamics within a single-frame of reference. Simulations are performed on 9-bus and 39-bus benchmark power systems for illustration purposes. Results show that the proposed approach provides the most effective location of series-connected controllers to improve the power system's transient behavior.     

Fate of surfactants in membrane bioreactors and conventional activated sludge plants

Two membrane bioreactors (MBRs) were operated at high sludge retention time (SRT) (between 30 and 75 d) in parallel to a conventional activated sludge plant (CASP) conducted at SRT = 10 d. The fate of linear alkylbenzene sulfonate (LAS), nonylphenol ethoxylates (NP(n)EO, n = 1-15), nonylphenoxy carboxylates (NP(n)EC, n = 1-2), and nonylphenol (NP) in these systems was investigated. All systems were very efficient in the removal of LAS (around 99%). The analysis of variance showed that the difference in the removal efficiency of LAS in the CASP and the MBR operated at SRT = 65-75 d (respectively 99.0 ± 0.43 and 99.8 ± 0.11) were significant (p < 0.05), confirming the importance of SRT in the removal of LAS. Comparison between the CASP and the MBRs in the removal efficiency of nonylphenolic compounds were conducted considering NP(3-15)EO, the sum of NP(1-15)EO, NP(1-2)EC, and nonylphenol (NP). In all cases MBRs were more efficient than the CASP. In the case of NP the removal was about 76 ± 7.5% for the CASP and 90% ± 12.1 and 82 ± 8.7% for the MBRs. Better performance of MBRs in the removal of nonylphenolic compounds can be attributed to a better degradation. For example, if the sum of NP(1-15)EO and NP(1-2)EC is considered, estimated biodegradation was about 48% for the CASP and 72% for MBRs.     

Use of microfungi in the treatment of oak chips: possible effects on wine

BACKGROUND: Oak barrels are commonly used in the aging of wines and spirits because of their positive effects on the product. In recent years the addition of oak chips has been used to introduce desirable wood aromas and flavours into wines. In this study, oak chips in saline solution or laboratory medium were inoculated with Penicillium purpurogenum, Aureobasidium pullulans, Phialemonium obovatum, Phanerochaete chrysosporium and a combination of Ph. chrysosporium and A. pullulans. After 12 weeks of incubation, oak chips (2 g L^?1) were macerated in a red wine for 17 days. Gas chromatography/mass spectrometry and high‐performance liquid chromatography were used to evaluate 14 compounds, namely furfural, furfuryl alcohol, guaiacol, syringol, cis‐β‐methyl‐γ‐octalactone, 2‐phenylethanol, 4‐vinylguaiacol, benzyl alcohol, 2,3‐butanediol, γ‐butyrolactone, benzaldehyde, 4‐ethylguaiacol, gallic acid and ellagic acid. RESULTS: The microfungal treatments increased the concentration of some components. In particular, P. purpurogenum resulted in a significant improvement in the levels of guaiacol, furfural, syringol, furfuryl alcohol and 2‐phenylethanol. CONCLUSION: Penicillium purpurogenum and Ph. chrysosporium showed a constant trend (enrichment of furfural and benzaldehyde) independent to some extent of the medium used for chip treatment. Copyright © 2010 Society of Chemical Industry     

Confined electrodeposition using a template-assisted procedure based on the selective desorption of a short chain thiol from a binary self-assembled monolayer formed on Ag(1 1 1)

The synthesis of nanostructures is an emerging area in nanoscience and technology with the possibility of numerous applications in micro and nanodevices. Confined electrodeposition can be achieved through the use of suitable templates, by which the electrodeposition occurs in natural or artificial holes of an insulating layer on a conducting substrate. Here, we present a procedure based on the selective desorption of 3-mercaptopropionic acid (MPA) from a mixture with 1-dodecanethiols (DDT) that forms a compact SAM on Ag(1 1 1). The compound grown is CdS, whose experimental growth conditions are simple and reproducible and make it a good “electrodeposition probe”.     

A case study of real-world tailpipe emissions for school buses using a 20% biodiesel blend

Numerous laboratory studies report carbon monoxide, hydrocarbon, and particulate matter emission reductions with a slight nitrogen oxides emission increase from engines operating with biodiesel and biodiesel blends as compared to using petroleum diesel. We conducted a field study on a fleet of school buses to evaluate the effects of biodiesel use on gaseous and particulate matter fuel-based emission factors under real-world conditions. The field experiment was carried out in two phases during winter 2004. In January (phase I), emissions from approximately 200 school buses operating on petroleum diesel were measured. Immediately after the end of the first phase measurement period, the buses were switched to a 20% biodiesel blend. Emission factors were measured again in March 2004 (phase II) and compared with the January emission factors. To measure gaseous emission factors we used a commercial gaseous remote sensor. Particulate matter emission factors were determined with a combination of the gaseous remote sensor, a Lidar (light detection and ranging), and transmissometer system developed at the Desert Research Institute of Reno, NV, U.S.A. Particulate matter emissions from school buses significantly increased (up to a factor of 1.8) after the switch from petroleum diesel to a 20% biodiesel blend. The fuel used during this campaign was provided by a local distributor and was independently analyzed at the end of the on-road experiment. The analysis found high concentrations of free glycerin and reduced flash points in the B 100 parent fuel. Both measures indicate improper separation and processing of the biodiesel product during production. The biodiesel fuels used in the school buses were not in compliance with the U.S.A. ASTM D6751 biodiesel standard that was finalized in December of 2001. The U.S.A. National Biodiesel Board has formed a voluntary National Biodiesel Accreditation Program for producers and marketers of biodiesel to ensure product quality and compliance with the ASTM standard. The results of our study underline the importance of the program since potential emission benefits from biodiesel may be reduced or even reversed without appropriate fuel quality control on real-world fuels.