Electrocoagulation technique in enhancing COD and suspended solids removal to improve wastewater quality.

This paper presents a preliminary study for the removal of COD and suspended solids in wastewater treatment by combining magnetic field and electrocoagulation (EC) technology. The experiments were carried out using batch apparatus and setup in the static method. Batch experiments with two monopolar iron (Fe) plate anodes and cathodes were employed as electrodes. Wastewater samples were prepared from milk powder with an initial COD of 1,140 mgL(-1) and suspended solids of 1,400 mgL(-1) and acidic conditions were employed (pH approximately 3). DC current was varied from 0.5-0.8 A and operating times were between 30 and 50 min. The results show that the effluent wastewater was very clear (turbidity approximately 9 NTU) and its quality exceeded the direct discharge standard. The suspended solids and COD removal efficiencies were as high as 30.6 and 75.5%, respectively. In addition, the experimental results also show that the electrocoagulation could neutralise the pH of wastewater.     

Butyltin Species and Inorganic Tin in Water and Sediment of the Detroit and St. Clair Rivers

Water and sediment samples from 29 locations in the Detroit and St. Clair rivers were analyzed for the highly toxic tri-n-butyltin (Bu₃Sn⁺) species and for the less toxic di-n-butyltin (Bu₂Sn²⁺) and n-butyltin (BuSn³⁺) species and inorganic tin. In general, locations sampled in the St. Clair River were less contaminated with butyltin species than those in the Detroit River. Inorganic tin and BuSn³⁺ were detected in over 90% of all subsurface water samples, while Bu₂Sn²⁺ and Bu₃Sn⁺ were detected in 45 and 28% of the same samples, respectively. The highest concentration ofBu₃Sn⁺ in subsurface water, 5.9 × 10^?10 mol Sn/L, was at the mouth of the Ecorse River, a tributary of the Detroit River. The three butyltin species and inorganic tin were also detected in 23–46% of all sediment samples. The highest concentrations of Bu₃Sn⁺ in sediment were found close to the mouths of the River Rouge, another tributary of the Detroit River, and the Ecorse River, and were 6.2 × I0^–7 and 1.7 × I0^–7 mol Sn/kg dry weight, respectively, for the top 2 cm of sediment.     

Description of the Inter-laboratory Comparison Programme in the New Zealand dairy industry

The Inter-laboratory Comparison Programme (ILCP) is a quality assurance system administered by the Dairy Division of the Ministry of Agriculture and Fisheries to monitor the performance of agency certified laboratories (ACLs). The programme works on a monthly basis during the milk producing season and is co-ordinated from the National Dairy Laboratory (NDL). Samples are despatched to Regional Dairy Labora-tories (RDL) and to the ACLs 2 weeks later. The RDL results are used to calculate an official mean. The ACL results are sent to the RDL where they are scrutinized immediately; hence, a rapid feedback on the ACL performance is possible. The NDL despatches a detailed statistical evaluation of results of ACLs and RDLs. The pro-gramme has increased from seven products in 1977 to eleven in 1984. Microbiological and chemical analyses are performed. A bacterial identification scheme to monitor E. coli and S. aureus was included in 1982. A scoring system (0 poor-10 good) which includes a weighting for specific tests and which is measured against an 'official' score has been introduced into a report which is distributed to all participants. The data generated by the programme are used by both ACLs and RDLs to check their analytical performance and quality control. Data are used by Dairy Division, as a national compilation of results issued by it which serves to highlight problem analyses, season trends and analytical limits.     

Characterization of indoor air pollution

This is a review paper addressing the current state-of-the-art. Concerns that motivate studies of the indoor environment are reviewed in the introduction. The source and typical diurnal variations of the concentration of several air contaminants are discussed in the section on characterization. A dynamic model is described in the section on indoor air quality modeling. Indoor air pollution control techniques are addressed in the last section.     

Vectored transmission for digital subscriber line systems

This paper describes the "vectored" transmission technique for digital subscriber line (DSL) systems, which utilizes user coordination at the central office or optical network unit. This method exploits the colocation of the downstream transmitters and of the upstream receivers, in order to achieve far-end crosstalk (FEXT) cancellation and perform multiuser transmission optimization. The performance improvements are particularly pronounced in environments with strong FEXT such as in very high-speed DSL. Discrete multitone is employed for each user with additional constraints on the cyclic prefix length and with the assumption of block-synchronized transmission and reception for downstream and upstream transmission correspondingly. Within each tone, upstream crosstalk is removed by multiple-input-multiple-output decision feedback at the receiving side, while downstream crosstalk is eliminated by analogous preprocessing at the transmitting side. Additionally, the issue of transmission energy allocation in frequency and among users is addressed. Assuming frequency-division duplexing, the corresponding optimization problem is formulated and solved via convex programming both for a fixed upstream-downstream band plan and for a dynamically programmable band plan. The case of power backoff as a means to reduce the impact of crosstalk on alien systems is also treated. Interestingly, the performance of the proposed methods is shown to be very close to known information theory bounds     

NEIGHBORHOOD APPROACHES TO URBAN CAPACITY BUILDING

The authors argue that the solution of urban problems requires resources and powers far beyond those available to most local governments. Only through partnerships of all relevant actors—public officials, businessmen and neighborhood residents—can such issues be dealt with. Yet, partnerships are neither simple nor inevitable. They require hard work and usually the development of the capacities of all involved. Such capacity building for partnerships is on three levels: the development of the individual capacity to play partnership roles; the creation of interactive partnerships operating as local problem solvers; and the fostering of inter-partnership networks. Neighborhoods are seen as the building blocks of cities, serving as a locality of scale upon which the citizen can base his concerns and actions and within which partnerships can operate effectively. Specific recommendations are made, utilizing this policy context to build capacity for partnerships at the neighborhood level, particularly with regard to the Intergovernmental Personnel Act.     

Long-term recovery of pressurized water reactors following a large break loss-of-coolant accident

The U.S. Nuclear Regulatory Commission recently identified a possible safety concern for pressurized water reactors. Following the reflood phase of a large break loss-of-coolant accident, long-term cooling of the reactor core may not be ensured. Specifically, the concern is that, for a pump discharge cold leg break, the loop seals in the reactor coolant pump suction piping will refill with liquid and the post-reflood steam production may depress the liquid levels in the downflow sides of the loop seals. A loop seal depression would cause a corresponding depression of the core liquid levels and possibly a fuel rod heatup in the upper core region. This paper is intended as an introduction of the safety issue that: (1) describes the important aspects of the problem, (2) provides an initial analysis of the consequences, and (3) discusses ongoing work in this area. Because the elevation of the loop seals is near the mid-core elevation in plants of Westinghouse design, the concern is greatest for those plants. There is less concern for most plants of Combustion Engineering design, and likely no concern for plants of Babcock and Wilcox design. This issue was addressed by employing both steady-state and transient systems analysis approaches. Two approaches were used because of uncertainties regarding actual reactor coolant system behavior during the post-reflood period. The steady-state approach involved the development and application of a simple computer program to investigate reactor coolant system behavior assuming quiescent post-reflood conditions. The transient systems approach involved investigating this behavior using the RELAP5/MOD2 computer code and a comprehensive RELAP5 model of a Westinghouse pressurized water reactor. The steady-state analysis indicated only a moderate fuel rod heatup is possible. The transient systems analysis indicated boiling and condensation-induced flow oscillations are sufficient to prevent fuel rod heatup. Analysis uncertainties are discussed.