Kinetic analysis of the crystallization of poly(p-phenylene sulphide)

Growth rates of spherulites were measured in poly(p-phenylene sulphide) crystallized from the melt and the quenched glass over the temperature range 100°C–280°C, possibly the most extensive overall range yet reported for any polymer and, as such, most propitious for study of régime III crystallization. For a medium M.wt. polymer, a régime II → III transition was obtained at 208°C using values of transport parameters common to many polymers ($\text{U1 = 1400}\text{cal mol}{}^{\mathrm{?1}}$, T_∞ ? T_g = 30°C) together with experimentally determined values of T⁰_m(315°C) and T_g(92°C). Under these conditions, the régime III/II slope ratio was found to be 2.07 (i.e. only 3.5% higher than predicted by régime theory), and reasonable estimates of surface free energies and of the work of chain folding were obtained. Other choices of the transport terms, including WLF and zero values, did not allow successful kinetic analyses. Although a régime I → II transition is predicted to occur at the high-temperature end of our growth-rate data, we found no experimental evidence for it. For a low M.wt. polymer, our analysis showed that régime III kinetics is obeyed at low temperatures, while at higher ones there is a continuous departure from that behaviour without, however, full attainment of régime II kinetics.     

Bioactivity of antifouling paints based on organotin toxicants

This paper discusses the bioactivity of antifouling paints based on organotin toxicants, such as tributyltin fluoride (TBTF) and triphenyltin fluoride (TPTF). These compounds were used alone or mixed as the main toxicant in formulations. The use of TPTF or mixtures of TPTF and TBTF, with vinyl binders, led to paints with satisfactory bioactivity during a 24 months immersion period. With the same binders, TBTF alone provided only 12 months of antifouling protection. The correlation coefficients calculated from the fouling attachment values and the rosin content in the binder showed that the bioactivity of the tested formulations depended on the solubility of the toxicant in sea water and on the composition and solubility of the binders.     

Gigahertz signal processing using reflex optoelectronic switching matrices

The application of reflex optoelectronic switching matrices (ROSM) to signal processing in the gigahertz region is analyzed. Various signal processing functions such as delay generation, loop filtering, word generation/detection, integration, and digital to analog conversion are identified and their respective realizations in a ROSM are presented. It is found that for dedicated signal processing functions, simpler submatrices instead of full matrices can be employed with significant reduction in complexity and cost. The performance of ROSM's using currently commercially available components confirms the feasibility of gigahertz signal processing with ROSM's.     

A method to study the history of a double oxide film defect in liquid aluminum alloys

Entrained double oxide films have been held responsible for reductions in mechanical properties in aluminum casting alloys. However, their behavior in the liquid metal, once formed, has not been studied directly. It has been proposed that the atmosphere entrapped in the double oxide film defect will continue to react with the liquid metal surrounding it, perhaps leading to its elimination as a significant defect. A silicon-nitride rod with a hole in one end was plunged into liquid aluminum to hold a known volume of air in contact with the liquid metal at a constant temperature. The change in the air volume with time was recorded by real-time X-ray radiography to determine the reaction rates of the trapped atmosphere with the liquid aluminum, creating a model for the behavior of an entrained double oxide film defect. The results from this experiment showed that first oxygen, and then nitrogen, was consumed by the aluminum alloy, to form aluminum oxide and aluminum nitride, respectively. The effect of adding different elements to the liquid aluminum and the effect of different hydrogen contents were also studied. This article is based on a presentation made in the John Campbell Symposium on Shape Casting, held during the TMS Annual Meeting, February 13–17, 2005, in San Francisco, CA.     

A Platform-Based Taxonomy for ESL Design

This article presents a taxonomy for ESL tools and methodologies that combines UC Berkeley's platform-based design terminologies with Dan Gajski's Y-chart work. This is timely and necessary because in the ESL world we seem to be building tools without first establishing an appropriate design flow or methodology, thereby creating a lot of confusion. This taxonomy can help stem the tide of confusion.     

Phosphorus Inputs to Lake Simcoe from 1990 to 2003: Declines in Tributary Loads and Observations on Lake Water Quality

Total phosphorus (TP) inputs to Lake Simcoe have led to hypolimnetic dissolved oxygen (DO) depletion and loss of cold water fish habitat. Since 1990, efforts have been made to reduce the total TP input to the lake below a defined target of 75 t/year, which was predicted to lead to reductions in spring TP concentration and improvements in end-of-summer hypolimnetic DO concentrations. The total TP load to the lake during the most recent period of record (1998/99-2003/04) ranged from 53 to 76 t/yr and averaged 67 t/yr, compared to an average of 114 t/yr estimated between 1990/91 and 1997/98 (range 85-157 t/yr). Reductions in TP loads from the catchment via tributary discharge (∼26 t) accounted for the majority of the decrease in total load between the two time periods. Total P concentrations decreased significantly in four out of six long-term monitored tributaries; however, concentrations in all six tributaries remain above the level recommended to avoid nuisance plant growth (30 μg/L). Although TP loads to the lake are currently below the target 75 t/yr, excessive growths of filamentous algae and macrophytes continue to be a problem in the nearshore zone. End-of-summer minimum hypolimnetic DO concentrations (average 4.3 mg/L, 1998/99-2003/04) remain substantially below the level (7 mg/L) that is considered protective of lake trout. Efforts to reduce TP loads to the lake therefore need to continue.     

Factors affecting the activity of anammox bacteria during start up in the continuous culture reactor.

Factors affecting cultivation of extremely slow-growing bacteria (anaerobic ammonium oxidiser, doubling time 11 days) were investigated by using upflow anaerobic sludge blanket (UASB) reactors which can maintain high solid retention time. The effects of concentrations of DO, free ammonia (FA), and nitrite on activation of anammox activity were tested during the start-up period. The reactor was inoculated with granular sludge collected from a full-scale UASB reactor used for treating brewery wastewater, and sludge from a piggery wastewater treatment plant and rotating biological contactor treating sewage. Results of continuous operation showed that concentrations of DO, free ammonia (FA) and nitrite in the reactors played a key role in stimulating the anammox activity during start-up period. It is crucial to keep DO below 0.2 ppm, FA below 2 mg/L and nitrite nitrogen below 35 mg/L to cultivate anammox cells in the continuous bioreactor. When the levels of DO, FA and nitrite in the influent were controlled at less than the inhibition levels, the anammox activity increased gradually in the anaerobic condition. Addition of hydrogen sulphide into the reactor enhanced anammox activity in the continuous culture. Through the SEM, TEM and FISH analysis, anammox bacteria were detected in the granular sludge after 3 months of continuous operation.     

Test of the KÉ-250-ShS machine for twisting acetate yarn

Conclusions An attempt has been made to use the KÉ-250-ShS machine for twisting acetate yarns.It has been found that in developing a new twisting machine it is advisable to use a checkerboard disposition of the spindles in its lower part with the objective of reducing the noise level, and also to use pedal braking to stop the spindles. This helps increase the productivity of twister labor, and mechanization and automation of operations associated with transfer in removing packages of weight not less than 3 kg.Translated from Khimicheskie Volokna, No. 6, pp. 40–41, November–December, 1985.     

Gigabit pulse position bistability in semiconductor lasers

The paper briefly reviews the major forms of optical bistability in active optical devices compatible for use in gigabit optical communication systems, and reports an entirely new optical bistability for the first time. Unlike previous devices, the two bistable states of the optical device are each a series of picosecond optical pulses at 1 GHz or greater repetition rates, and are distinguished by a half period temporal shift between their temporal positions in relation to a clock pulse. The bistable device is based on a gain switched semiconductor laser. Theoretical studies suggest 100-ps switching speeds might be achieved, and experimental results are reported indicating optically triggered switching times of 500 ps.