A semiautomated procedure for the determination of phosphorus in water, waste waters and particulates

Improved procedures for the determination of total dissolved phosphorus (TDP), particulate phosphorus (PP) and dissolved inorganic orthophosphate (DP) are described. Organic particulate material is solubilized in 5 n NaOH, and phosphorus compounds are oxidized and mineralized to orthophosphate by persulfate digestion. DP is determined by an improved automated molybdenum blue procedure that does not require sample pH adjustment or a correction for silicate interference in the 0–50 mg Si 1^?1 range. The use of 36-position digestion racks allows 32 TDP or PP samples to be digested in ca. 1 and 4 h respectively. Detection limits in μg of phosphorus 1^?1 are DP, 2; TDP, 5; and PP. 1. Waste water samples were analyzed for TDP and PP by the nitric acid-sulfuric acid procedure and by the proposed method. There was no significant difference between the two sets of data (P > 0.45).     

A digital wind gust recorder

The instrument was a byproduct of an undergraduate final year project on wind power which was carried out by the Department of Mechanical Engineering of the University of Liverpool.The windmill test site was on an exposed, rocky island where there was no history of weather recording but a long tradition of violent winds.Field experience during the winter months suggested that corrosion fatigue arising from wind buffeting and salt spray would rank equally with maximum wind pressure as criteria of failure and if modern materials, so convenient for forming aerodynamic surfaces, were to be used then limited life concepts would need to be considered. This called for more knowledge of wind variations at the test site. A complete wind spectrum taken on chart recording instruments would have been ideal but since such such refined devices were not available the instrument to be described was designed.The only wind measuring instrument which was available was a rotating cup anemometer. This supplied an alternating voltage proportional to its rotational speed. It also operated a gear driven microswitch which could give an integrated “miles of wind” reading on an electromagnetic counter.Briefly the e.m.f. generated by the anemometer (Fig. 1) was matched against a pre-set voltage corresponding to the required gust velocity. When this was exceeded an appropriate counter was operated. Only the rising e.m.f. was significant. The subsequent fall was ignored. Initially three stages were incorporated which reported the gusts rising through forty, fifty and sixty knots, respectively. These recorded on separate counters. All basic settings were based on pitot-static speed determinations in a wind tunnel.     

Trace-metal concentrations in normal human liver: methods to cope with marked variability

Concentrations of trace elements in human tissues characteristically vary widely, and the distributions of most concentrations are skewed to the right. Examination of some of the factors which contribute to the marked variability and skewness of the concentrations revealed that: (1) distributions of concentrations are satisfactorily normal (Gaussian) after logarithmic transformation, (2) ash weight is the best frame of reference in which to report results, (3) the distributions of metal concentrations are not further normalized by adjustments which assume that tissue lipid or collagen contains a fixed fraction of the metal found in the parenchyma, and (4) the choice of sample site within the liver is of minimal significance.     

Seismic methods for study of soil building properties

Bulletin of Engineering Geology and the Environment - Information about distribution of elastic wave propagation velocities Vp, Vs in the subsurface zone of a soil mass can be obtained rapidly and...     

Combined nitrification/denitrification in a membrane reactor

An ever stricter legislation regulating wastewater leads to an increasing demand for biological treatment plants which are able to selectively eliminate nitrogen from wastewaters with a high influent concentration, even when operating in partial influent mode. A membrane-tube-module (MSM) reactor (Membran-Schlauch-Modul-Reaktor) was constructed and realized in the IUV at the University of Bremen. The present approach makes use of all the various layers of the whole biofilm, enabling nitrification and denitrification processes to run simultaneously in one and the same biofilm under optimized conditions. The biological degradation capacity of the system was first successfully tested with synthetic wastewater, and subsequently in a real application with effluents from a recycling of animal carcasses plant and from a coke-oven plant. A mathematical model was devised which describes this biofilm system. The resulting equations were solved by means of the simulation software AQUASIM.     

Monitoring and kinetic study of ammonia oxidation using dissolved oxygen electrode and NAD(P) H fluorometer

The ammonia oxidation of a mixed culture enriched from a wastewater treatment plant sludge was monitored by a DO probe and a nicotinamide adenine dinucleotide (phosphate) (NAD(P)H) fluorometer. Under fixed aeration, DO reflected ammonia oxidation effectively. According to the DO profiles and the total ammonia concentrations analyzed experimentally, the ammonia oxidation kinetics of the enriched culture was determined. The ammonia oxidation rate was found sensitive to pH, especially at low total ammonia concentrations. At high concentrations of total ammonia, the maximum ammonia oxidation rate occurred at pH 7.6+/-0.1. At low concentrations, the pH sensitivity intensified significantly and the apparent optimal pH shifted higher with decreasing total ammonia concentrations, because NH3 molecules were the true substrate for ammonia oxidation and more NH4+ ions were converted to NH3 molecules at higher pH. The ammonia oxidation kinetics was therefore developed according to the concentration of NH3 molecules, instead of the commonly used total ammonia concentration. The kinetics followed Michaelis-Menten behavior for both DO and NH3 concentration: the maximum rate was 16.7+/-0.7 mg NH3-N/(g TSS-h) and the Michaelis constants for DO and NH3 were (14+/-2)% air saturation and (4.4+/-0.4) x 10(-2) (mg NH3-N/L), respectively. It was also concluded from the study that with or without exogenous organic substances, the NAD(P)H fluorescence of the enriched nitrifying culture was undetectable. The fluorescence did not respond to addition or depletion of substrate (ammonia, glucose, or acetate), change between aerobic and anaerobic conditions, or even KCN addition to kill the culture.     

Buckling of tube-stiffened prolate domes under external water pressure

The paper describes experimental tests carried out on three tube-stiffened prolate hemi-ellipsoidal domes under external water pressure.The tubes were stuck to the internal surfaces of these three domes, in their flanks, and the experimental tests showed that the tubes increased the buckling pressures of these domes, especially in one case, when the tube was subjected to an initial internal pressure.All three domes failed by lobar buckling, in their flanks, and showed buckling resistances much larger than similar unstiffened domes.     

Prediction of the effectiveness of rolling dynamic compaction using artificial neural networks and cone penetration test data

Rolling Dynamic Compaction(RDC),which is a ground improvement technique involving non-circular modules drawn behind a tractor,has provided the construction industry with an improved ground compaction capability,especially with respect to a greater influence depth and a higher speed of compaction,resulting in increased productivity. However,to date,there is no reliable method to predict the effectiveness of RDC in a range of ground conditions. This paper presents a new and unique predictive tool developed by means of artificial neural networks(ANNs) that permits a priori prediction of density improvement resulting from a range of ground improvement projects that employed 4-sided RDC modules;commercially known as"impact rollers". The strong coefficient of correlation(i.e. R0.86) and the parametric behavior achieved in this study indicate that the model is successful in providing reliable predictions of the effectiveness of RDC in various ground conditions.     

Smoke development at different energy flux levels in an NBS smoke density chamber

An automatically controlled high-energy flux heater has been developed and utilized in an NBS Smoke Density Chamber.     

Reliability of corrosion-damaged steel structures using interval probability theory

Engineering decisions concerning the performance of existing structures must be made in the presence of uncertainties. The remaining capacity of corroded steel structures provides a good example of different aspects of uncertainty. These include: an unknown or partially known extent of damage; a variability in loading and an uncertain reserve of structural capacity depending on the mode of failure. The theory of structural reliability has been developed to provide a method of analysis for structural safety. In this paper, methods are proposed to compute the component reliability of corrosion-damaged steel members. The application of a recently developed theory called interval probability theory for system reliability is illustrated using the data obtained from actual samples of corroded beams.