2.4GHz0.18um CMOS功率放大器设计

文章介绍了采用TSMC 0.18um CMOS工艺设计的2.4GHz WLAN(无线局域网)功率放大器,放大器采用并联拓扑结构设计,改善了功率附加效率(PAE).在3.3V工作电压下,其压缩点输出功率为21dBm,最大输出功率22.3dBm,最大功率附加效率PAE高于38％,可应用于无线局域网802.11b标准的系统.     

Tuning the band gap of the CIGS solar buffer layer Cd1-xZnxS (x=0—1) to achieve high efficiency

To evaluate the impact of zinc sulfate (ZnSO4) concentration on the structural properties of the films, Cd1-xZnxS thin films were formed on glass substrates using chemical bath deposition (CBD) in this study. The effect of ZnSO4 precursor concentration on the surface morphology, optical properties, and morphological structure of the Cd1-xZnxS films was investigated. To study the impact of zinc doping content on the performance metrics of Cu(In1-xGax)Se2 (CIGS) cells in the experimental group and to improve the buffer layer thickness, simulations were run using one-dimensional solar cell capacitance simulator (SCAPS-1D) software.     

基于海量数据分析的煤矿生产辅助决策支持系统的设计

以某煤矿自动化系统的建设为例,提出了一种基于海量数据分析的煤矿生产辅助决策支持系统的设计方案。该系统通过融合全矿井各传感器采集的数据,进行分系统的汇聚统计分析以及全系统的集成统计分析,可对煤矿生产过程中各机电设备的健康状况、故障、运行能耗作出判断,从而实现对煤矿生产的辅助决策支持。实际应用表明,该系统运行良好,提高了煤矿生产效率和管理水平。     

操作系统原理实验教学改革

操作系统原理课程包含广泛的专业基础知识和较强的专业内涵,抽象概念多,内容更新快,因此该课程的实验教学需要不断更新实验教学内容,改革实验教学方法。本文结合本校实际教学特点,从这门课程的实验教学方法、实验教学手段、实验设计、课程设计等方面探讨了操作系统原理的实验教学改革情况。     

高校单片机课程教改研究

本文通过分析高校单片机课程教学存在的问题、结合教学实践提出改进措施,并具体介绍采用系统可编程单片机的编程思想、自制实验装置、自行设计实验项目等教学方法,以期为同行提供参考,推进高校单片机教学的发展。     

无线传感器网络在桥梁健康监测中的应用研究

针对无线传感器网络技术在桥梁结构健康监测中的应用,研究并开发了基于无线传感器网络的桥梁结构健康监测系统.采用能量均衡分簇路由算法、时间同步算法和能量管理算法,组建了低功耗、节点能量消耗均衡、具有多跳路由结构的无线传感器网络.同时,应用加速度传感器检测桥梁振动的加速度数据,通过FFT变换由加速度数据得到桥梁的固有频率,并根据固有频率分析桥梁的健康状况.系统在公路高架桥中进行了应用试验,试验结果表明,系统便携性好,监测数据可靠.     

AutoProc: An automatic proactive replication scheme for P2P storage

Due to the prevalence of peer departures, P2P storage systems need to constantly generate replicas for high durability. However, few existing systems are able to select the right replication rate that balances replication cost and durability, e.g., minimizing replication cost without threatening the durability target. In this paper, we propose a method called AutoProc to automate the replication process in P2P storage systems. AutoProc employs two key techniques to enable cost-effective replication: correct...     

Implementation and evaluation of parallel FFT on Engineering and Scientific Computation Accelerator (ESCA) architecture

The fast Fourier transform (FFT) is a fundamental kernel of many computation-intensive scientific applications.This paper deals with an implementation of the FFT on the accelerator system,a heterogeneous multi-core architecture to accelerate computation-intensive parallel computing in scientific and engineering applications.The Engineering and Scientific Computation Accelerator (ESCA) consists of a control unit and a single instruction multiple data (SIMD) processing element (PE) array,in which PEs communicate with each other via a hierarchical two-level network-on-chip (NoC) with high bandwidth and low latency.We exploit the architecture features of ESCA to implement a parallel FFT algorithm efficiently.Experimental results show that both the proposed parallel FFT algorithm and the ESCA architecture are scalable.The 16-bit fixed-point parallel FFT performance of ESCA is compared with a published work to prove the superiority of the mapping algorithm and the hardware architecture.The floating-point parallel FFT performances of ESCA are evaluated and compared with those of the IBM Cell processor and GPU to demonstrate the computing power of the ESCA system for high performance applications.     

小型多自由度机器人舵机群控制系统设计

针对小型多自由度机器人关节控制的需求,提出一种高精度多路PPM信号生成方法。具体介绍了系统的硬件电路和软件实现方法。对多路PPM信号的生成方法和数据排序算法等系统的关键部分进行了详细的阐述。测试结果表明,系统生成的24路PPM信号时间精度可达2us,精度误差小于0.2us。     

基于LabVIEW的MGCplus通信方法研究

基于LabVIEW开发环境,研究了MGCplus数据采集系统通信方法。根据液压泵-马达测试系统需求,运用Catman自带的ActiveX以及LabVIEW分析包,开发了LabVIEW环境下MGCplus数据采集系统的以太网通信软件。测试表明,通信系统运行稳定,满足测试系统的各项要求,具有较强的实用价值。