Effects of Microalloying on the Impact Toughness of Ultrahigh-Strength TRIP-Aided Martensitic Steels

The effects of the addition of Cr, Mo, and/or Ni on the Charpy impact toughness of a 0.2 pct C-1.5 pct Si-1.5 pct Mn-0.05 pct Nb transformation-induced plasticity (TRIP)-aided steel with a lath-martensite structure matrix (i.e., a TRIP-aided martensitic steel or TM steel) were investigated with the aim of using the steel in automotive applications. In addition, the relationship between the toughness of the various alloyed steels and their metallurgical characteristics was determined. When Cr, Cr-Mo, or Cr-Mo-Ni was added to the base steel, the TM steel exhibited a high upper-shelf Charpy impact absorbed value that ranged from 100 to 120 J/cm² and a low ductile–brittle fracture appearance transition temperature that ranged from 123 K to 143 K (?150 °C to ?130 °C), while also exhibiting a tensile strength of about 1.5 GPa. This impact toughness of the alloyed steels was far superior to that of conventional martensitic steel and was caused by the presence of (i) a softened wide lath-martensite matrix, which contained only a small amount of carbide and hence had a lower carbon concentration, (ii) a large amount of finely dispersed martensite-retained austenite complex phase, and (iii) a metastable retained austenite phase of 2 to 4 vol pct in the complex phase, which led to plastic relaxation via strain-induced transformation and played an important role in the suppression of the initiation and propagation of voids and/or cleavage cracks.     

Infection with hepatitis G virus and its strain variant, the GB agent (GBV-C), among blood donors in Japan

Much of the morbidity and mortality seen in cystic fibrosis (CF) is related to chronic infection of the respiratory tract with Pseudomonas aeruginosa. Some studies have attributed the strong relationship between CF and Pseudomonas colonization to the presence of increased numbers of specific cell-surface receptors, although other work suggests that this relates to the presence of mucus. Several groups are now assessing the use of gene transfer as a novel form of treatment for CF. We have examined whether P. aeruginosa binding to freshly obtained CF respiratory epithelial cells is increased, and have studied the effects of transfer of the CF transmembrane conductance regulator (CFTR) gene on this attachment. Binding of P. aeruginosa to noncultured nasal epithelial cells from both CF patients (n = 31) and healthy controls (n = 15) was studied with scanning electron microscopy. Binding was also assessed for CF cells following transfection with CFTR/liposome complexes. Epifluorescence microscopy was used to assess the effects of gene transfer on chloride fluxes. Adherence of P. aeruginosa directly to the cell surface of CF airway epithelium was significantly (P < 0.001) increased over that in non-CF controls. Liposome-mediated CFTR gene transfer resulted in a significant (P < 0.01) reduction in the numbers of bacteria bound to ciliated epithelial cells. Fluorescence microscopy confirmed correction of the basic chloride defect. Thus, in CF, the absence of normal CFTR results in increased binding of P. aeruginosa to respiratory epithelial cells. This abnormality can be corrected in vitro by restoration of CFTR function. This has important implications both for the pathogenesis of CF and for the future application and assessment of gene therapy for this disease.     

Green emitting β$ubeta$-SiAlON:Eu2+ phosphors derived from chemically modified perhydropolysilazanes

We report the first synthesis of β-SiAlON:Eu²⁺ phosphors from single-source precursors, perhydropolysilazane (PHPS), chemically modified with Al(OCH(CH₃)₂)₃, and EuCl₂. The reactions occurring during the precursor synthesis and the subsequent thermal conversion of polymeric precursors into β-SiAlON:Eu²⁺ phosphors have been studied by a complementary set of analytical techniques, including infrared spectroscopy, gas chromatography–mass spectrometry, thermogravimetry–mass spectrometry, X-ray diffraction (XRD), photoluminescence spectroscopy, and scanning electron microscopy. It has been clearly established that Al(OCH(CH₃)₂)₃ immediately reacted with PHPS to afford N–Al bonds at room temperature, whereas N–Eu bond formation was suggested to proceed above 600°C accompanied by the elimination of HCl up to 1000°C in flowing N₂. The subsequent 1800°C-heat treatment for 1 h under an N₂ gas pressure at 980 kPa allowed converting the single-source precursors into fine-grained β-SiAlON:Eu²⁺ phosphors. XRD analysis revealed that the Al/Si of .09 was the critical atomic ratio in the precursor synthesis to afford single-phase β-SiAlON (z = .55). Moreover, Eu²⁺-doping was found to efficiently reduce the carbon impurity in the host β-SiAlON. The polymer-derived β-SiAlON:Eu²⁺ phosphors exhibited green emission under excitation at 460 nm and achieved the highest green emission intensity at the critical dopant Eu²⁺ concentration at 1.48 at%.     

Simulation of dynamic behavior of surfactants on a hydrophobic surface using periodic-shell boundary molecular dynamics

The adsorption and aggregation behaviors of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) on a hydrophobic graphite surface were examined using a novel molecular dynamics (MD) simulation with the periodic-shell boundary condition (PSBC). Differences in the adsorption behavior of SDS and CTAB molecules were clearly shown on the hydrophobic surface. Unexpectedly, the SDS molecules approached the graphite surface with their hydrophilic head groups. This unexpected approach mode was thought to be due to the aqueous layer on the graphite surface. The hydrophobic moiety of SDS molecules repeatedly adsorbed and desorbed on the graphite surface. In addition, SDS molecules kept moving on the graphite surface; thus, they did not form a stable adsorption layer. In contrast to SDS, the hydrophobic moiety of CTAB molecules approached the graphite surface at the primary step of adsorption. The hydrophobic moieties of CTAB molecules came close to each other, whereas the hydrophilic groups separated from one another. This result suggests that the CTAB molecules form molecular assemblies with a curved structure. The simulation results were consistent with the experimental observations. A clear difference between the adsorption behavior of SDS and CTAB molecules was revealed by MD simulations with PSBC.     

Methanol oxidation on carbon-supported Pt-Ru and TiO2 (Pt-Ru/TiO2/C) electrocatalyst prepared using polygonal barrel-sputtering method

Methanol oxidation performance of a carbon-supported Pt-Ru alloy catalyst used at the direct methanol fuel cell (DMFC) anode is improved by adding TiO₂. However, the methanol oxidation performance of the electrocatalyst described above must be enhanced further to realize practical application in DMFCs. In this study, we used our original surface-modifying technique termed the “polygonal barrel-sputtering method” to prepare a carbon-supported Pt-Ru and TiO₂ (Pt-Ru/TiO₂/C) electrocatalyst offering higher methanol oxidation performance. The obtained results show that the methanol oxidation performance of the prepared Pt-Ru/TiO₂/C is superior to that using wet process as the TiO₂ deposition method. Furthermore, for our sputtering method, the peak current of methanol oxidation on the Pt-Ru/TiO₂/C is enhanced by increasing the TiO₂ deposited amount up to 2.8 wt.%. These results suggest that a Pt-Ru/TiO₂ interface area is increased using the polygonal barrel-sputtering method, providing the high methanol oxidation performance of Pt-Ru/TiO₂/C.     

Optogenetic Therapy for Visual Restoration

Optogenetics is a recent breakthrough in neuroscience, and one of the most promising applications is the treatment of retinal degenerative diseases. Multiple clinical trials are currently ongoing, less than a decade after the first attempt at visual restoration using optogenetics. Optogenetic therapy has great value in providing hope for visual restoration in late-stage retinal degeneration, regardless of the genotype. This alternative gene therapy consists of multiple elements including the choice of target retinal cells, optogenetic tools, and gene delivery systems. Currently, there are various options for each element, all of which have been developed as a product of technological success. In particular, the performance of optogenetic tools in terms of light and wavelength sensitivity have been improved by engineering microbial opsins and applying human opsins. To provide better post-treatment vision, the optimal choice of optogenetic tools and effective gene delivery to retinal cells is necessary. In this review, we provide an overview of the advancements in optogenetic therapy for visual restoration, focusing on available options for optogenetic tools and gene delivery methods.     

Flow range enhancement by secondary flow effect in low solidity circular cascade diffusers

High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating the efficiency at design flow rate. A numerical simulation is very effective in design procedure, however, cost of the numerical simulation is generally high during the practical design process, and it is difficult to confirm the optimal design which is combined with many parameters. A multi-objective optimization technique is the idea that has been proposed for solving the problem in practical design process. In this study, a Low Solidity circular cascade Diffuser (LSD) in a centrifugal blower is successfully designed by means of multi-objective optimization technique. An optimization code with a meta-model assisted evolutionary algorithm is used with a commercial CFD code ANSYS-CFX. The optimization is aiming at improving the static pressure coefficient at design point and at low flow rate condition while constraining the slope of the lift coefficient curve. Moreover, a small tip clearance of the LSD blade was applied in order to activate and to stabilize the secondary flow effect at small flow rate condition. The optimized LSD blade has an extended operating range of 114 % towards smaller flow rate as compared to the baseline design without deteriorating the diffuser pressure recovery at design point. The diffuser pressure rise and operating flow range of the optimized LSD blade are experimentally verified by overall performance test. The detailed flow in the diffuser is also confirmed by means of a Particle Image Velocimeter. Secondary flow is clearly captured by PIV and it spreads to the whole area of LSD blade pitch. It is found that the optimized LSD blade shows good improvement of the blade loading in the whole operating range, while at small flow rate the flow separation on the LSD blade has been successfully suppressed by the secondary flow effect.     

Inter-laboratory study for validation of a Japanese official analytical method for determination of patulin in apple juice

To validate a modified version of AOAC official method of analysis 995.10 as an official standard in Japan for determination of patulin in apple juice, an inter-laboratory study was performed in 11 laboratories using a non-contaminated sample, 2 naturally contaminated samples and 2 spiked samples of apple juice. For naturally contaminated apple juices, the relative standard deviations for repeatability and reproducibility were 3.2, 7.1% and 10.0, 21.7%, respectively. HORRAT values were 0.4, 0.9. The average recovery of patulin from spiked sample was 83.7%. The limit of quantification was calculated as 10 microg/kg. From these results, the method was thought to be suitable as an official standard for determination of patulin in apple juice in Japan.