A numerical method for natural convection and heat conduction around and in a horizontal circular pipe

Natural convection around a horizontal circular pipe coupled with heat conduction in the solid structure is numerically investigated using a preconditioning method for solving incompressible and compressible Navier–Stokes equations. In this method, fundamental equations are completely reduced to an equation of heat conduction when the flow field is static (zero velocity). Therefore, not only compressible flows but also very slow flows such as natural convection in a flow field and heat conduction in a static field can be simultaneously calculated using the same computational algorithm. In this study, we first calculated the compressible flow around a NACA0012 airfoil with conduction in the airfoil and then simulated natural convections around a horizontal circular pipe with a different heat conductivity. Finally, we numerically investigated the effect of heat conductivity of the pipe on natural convection.     

Feasibility study on 1.6 μm continuous-wave modulation laser absorption spectrometer system for measurement of global CO2 concentration from a satellite

A feasibility study is carried out on a 1.6 μm continuous-wave modulation laser absorption spectrometer system for measurement of global CO(2)concentration from a satellite. The studies are performed for wavelength selection and both systematic and random error analyses. The systematic error in the differential absorption optical depth (DAOD) is mainly caused by the temperature estimation error, surface pressure estimation error, altitude estimation error, and ON wavelength instability. The systematic errors caused by unwanted backscattering from background aerosols and dust aerosols can be reduced to less than 0.26% by using a modulation frequency of around 200 kHz, when backscatter coefficients of these unwanted backscattering have a simple profile on altitude. The influence of backscattering from cirrus clouds is much larger than that of dust aerosols. The transmission power required to reduce the random error in the DAOD to 0.26% is determined by the signal-to-noise ratio and the carrier-to-noise ratio calculations. For a satellite altitude of 400 km and receiving aperture diameter of 1 m, the required transmission power is approximately 18 W and 70 W when albedo is 0.31 and 0.08, respectively; the total measurement time in this case is 4 s, which corresponds to a horizontal resolution of 28 km.     

Fabrication of dense β-calcium orthophosphate with submicrometer-sized grains and its high-temperature superplastic deformation

High-density β-calcium orthophosphate (β-Ca₃(PO₄)₂, also called β-tricalcium phosphate: β-TCP) ceramics with submicrometer-sized grains were fabricated using a pulse-current pressure firing route. The maximum relative density of the β-TCP compacts was 98.7% at 1050 °C and this was accompanied by a translucent appearance. The mean grain size of the β-TCP compacts increased slightly with temperature to reach 0.78 μm at 1000 °C. However, upon further increasing the firing temperature to 1050 °C the mean grain size increased significantly to 1.6 μm. The extent of plastic deformation during tensile testing was examined at temperatures between 900 and 1100 °C using a strain rate in the range 9.26 × 10⁻⁵ to 4.44 × 10⁻⁴ s⁻¹. The maximum tensile strain achieved was 145% for a test temperature of 1000 °C and strain rate of 1.48 × 10⁻⁴ s⁻¹ and this was attributed to the relatively high density and small grain size.     

Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion

The structural changes in mechanically mixed metals of immiscible combinations of elements caused by bulk mechanical alloying (MA) through the use of high pressure torsion (HPT) were investigated in Ag–Ni and Nb–Zr systems. There was no alloying between Ag and Ni on atomic scale even after 100 rotations of HPT. On the other hand, the β-Zr phase started to appear after HPT 2 rotations in the Nb–Zr system, even though β-Zr is a high temperature phase. Further, Nb and Zr were completely mixed to form a bcc structured single phase after HPT 100 rotations. The sequence of alloying in the Nb–Zr system during HPT was discussed. These results clearly suggest that non-equilibrium phases can form in the Nb–Zr system by bulk MA by the use of HPT.     

Thin reduced graphene oxide interlayer with a conjugated block copolymer for high performance non-volatile ferroelectric polymer memory

Polymer ferroelectric-gate field effect transistors (Fe-FETs) employing ferroelectric polymer thin films as gate insulators are highly attractive as a next-generation non-volatile memory. For minimizing gate leakage current of a device which arises from electrically defective ferroelectric polymer layer in particular at low operation voltage, the materials design of interlayers between the ferroelectric insulator and gate electrode is essential. Here, we introduce a new solution-processed interlayer of conductive reduced graphene oxides (rGOs) modified with a conjugated block copolymer, poly(styrene-block-paraphenylene) (PS-b-PPP). A FeFET with a solution-processed p-type oligomeric semiconducting channel and ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) insulator exhibited characteristic source–drain current hysteresis arising from ferroelectric polarization switching of a PVDF-TrFE insulator. Our PS-b-PPP modified rGOs (PMrGOs) with conductive moieties embedded in insulating polymer matrix not only significantly reduced the gate leakage current but also efficiently lowered operation voltage of the device. In consequence, the device showed large memory gate voltage window and high ON/OFF source–drain current ratio with excellent data retention and read/write cycle endurance. Furthermore, our PMrGOs interlayers were successfully employed to FeFETs fabricated on mechanically flexible substrates with promising non-volatile memory performance under repetitive bending deformation.     

Nano Molecular‐Platform: A Protocol to Write Energy Transmission Program Inside a Molecule for Bio‐Inspired Supramolecular Engineering

In a coded self‐assembly, a simple code is written in the molecule, which self‐assembles the molecules into a fractal like structure, which acts as a seed for the next step. As the molecule turns into a complex seed, the code transforms into another form and several seeds self‐assemble into another structure, which acts as a seed for the next step. Until now, this technology was considered as a prerogative of nature. Here, a dendritic network is used to write a basic code by synthetically attaching 32 molecular rotors and doping two controller molecules in its cavity. The code live, which is an energy transmission path in the molecule, is imaged. When the energy transmission path or code is triggered, a series of products generate one after another spontaneously. Two examples are: i) dendritic seed (5–6 nm)→paired nanowire (≈12 nm)→nanowire (≈200 nm)→microwire (500 nm)→wire like rod (1–2 μm)→jelly→rectangular sheet (5 μm). ii) dendritic seed→nano‐sphere (20 nm)→micro‐sphere (500 nm)→large balls(1 μm)→oval shape rod (5–10 μm)→Y, L or T shaped rod assembly. The energy level interactions are tracked using spectroscopy how exactly a directed energy transfer code generates multi‐step synthesis from nano to the visible scale.     

A Dietary Oxysterol, 7-Ketocholesterol,Exacerbates Imiquimod-Induced Psoriasis-like Dermatitis in Steatohepatitic Mice

Patients with psoriasis are at a higher risk of developing nonalcoholic fatty liver disease. We previously identified an oxidized derivative of cholesterol, 7-ketocholesterol (7KC), in diet-induced steatohepatitic mice. Here, we investigated whether 7KC exacerbates psoriasis-like dermatitis by accelerating steatohepatitis in mice. A high-fat/high-cholesterol/high-sucrose/bile salt diet (nonalcoholic steatohepatitis (NASH) diet) with or without 0.0125% 7KC was fed to C57BL/6 mice (7KC or control group) for three weeks to induce steatohepatitis. A 5% imiquimod cream was then applied to the ears and dorsal skin for four days to induce psoriasis-like dermatitis. Hepatic lipid accumulation and inflammatory cell infiltration were exacerbated in the 7KC group compared with the control group after three weeks. Serum tumor necrosis factor-α (TNF-α) levels were also elevated in the 7KC group (108.5 ± 9.8 vs. 83.1 ± 13.1 pg/mL, p < 0.005). Imiquimod cream increased the psoriasis area severity index (PASI) score in mice in the 7KC group (9.14 ± 0.75 vs. 5.17 ± 1.17, p < 0.0001). Additionally, Tnfa, Il23a, Il17a, and Il22 mRNA levels in the dorsal lesion were significantly upregulated. Finally, Th17 cell differentiation and the TNF signaling pathway were enhanced in the dorsal lesions and liver of mice in the 7KC group. These data suggest that steatohepatitis and psoriasis are linked by a potent, diet-related factor.     

Visualizing Intramolecular Dynamics of Membrane Proteins

Membrane proteins play important roles in biological functions, with accompanying allosteric structure changes. Understanding intramolecular dynamics helps elucidate catalytic mechanisms and develop new drugs. In contrast to the various technologies for structural analysis, methods for analyzing intramolecular dynamics are limited. Single-molecule measurements using optical microscopy have been widely used for kinetic analysis. Recently, improvements in detectors and image analysis technology have made it possible to use single-molecule determination methods using X-rays and electron beams, such as diffracted X-ray tracking (DXT), X-ray free electron laser (XFEL) imaging, and cryo-electron microscopy (cryo-EM). High-speed atomic force microscopy (HS-AFM) is a scanning probe microscope that can capture the structural dynamics of biomolecules in real time at the single-molecule level. Time-resolved techniques also facilitate an understanding of real-time intramolecular processes during chemical reactions. In this review, recent advances in membrane protein dynamics visualization techniques were presented.     

Effect of Hypoxia on Pulmonary Endothelial Cells from Bleomycin-Induced Pulmonary Fibrosis Model Mice

Pulmonary fibrosis is a progressive and fatal disorder characterized by dysregulated repair after recurrent injury. Destruction of the lung architecture with excess extracellular matrix deposition induces respiratory failure with hypoxia and progressive dyspnea. The impact of hypoxia on pulmonary endothelial cells during pulmonary fibrogenesis is unclear. Using a magnetic-activated cell sorting system, pulmonary endothelial cells were isolated from a mouse model of pulmonary fibrosis induced by intratracheally administered bleomycin. When endothelial cells were exposed to hypoxic conditions, a hypoxia-inducible factor (HIF)-2α protein was detected in CD31- and α-smooth muscle actin (SMA)-positive cells. Levels of plasminogen activator inhibitor 1, von Willebrand factor, and matrix metalloproteinase 12 were increased in endothelial cells isolated from bleomycin-treated mice exposed to hypoxic conditions. When endothelial cells were cultured under hypoxic conditions, levels of fibrotic mediators, transforming growth factor-β and connective tissue growth factor, were elevated only in endothelial cells from bleomycin-treated and not from saline-treated lungs. The increased expression of α-SMA and mesenchymal markers and collagen production in bleomycin- or hypoxia-stimulated endothelial cells were further elevated in endothelial cells from bleomycin-treated mouse lungs cultured under hypoxic conditions. Exposure to hypoxia damaged endothelial cells and enhanced fibrogenesis-related damage in bleomycin-treated pulmonary endothelial cells.