Variations of stress intensity factor of a semi-elliptical surface crack subjected to mixed mode loading

Maximum stress intensity factors of a surface crack usually appear at the deepest point of the crack, or a certain point along crack front near the free surface depending on the aspect ratio of the crack. However, generally it has been difficult to obtain smooth distributions of stress intensity factors along the crack front accurately due to the effect of corner point singularity. It is known that the stress singularity at a corner point where the front of 3 D cracks intersect free surface is depend on Poisson's ratio and different from the one of ordinary crack. In this paper, a singular integral equation method is applied to calculate the stress intensity factor along crack front of a 3-D semi-elliptical surface crack in a semi-infinite body under mixed mode loading. The body force method is used to formulate the problem as a system of singular integral equations with singularities of the form r ⁻³ using the stress field induced by a force doublet in a semi-infinite body as fundamental solution. In the numerical calculation, unknown body force densities are approximated by using fundamental density functions and polynomials. The results show that the present method yields smooth variations of mixed modes stress intensity factors along the crack front accurately. Distributions of stress intensity factors are indicated in tables and figures with varying the elliptical shape and Poisson's ratio.     

Analgesic Effect of Tranilast in an Animal Model of Neuropathic Pain and Its Role in the Regulation of Tetrahydrobiopterin Synthesis

Trigeminal neuralgia is unilateral, lancinating, episodic pain that can be provoked by routine activities. Anticonvulsants, such as carbamazepine, are the drugs of choice; however, these possess side-effects. Microvascular decompression is the most effective surgical technique with a higher success rate, although occasionally causes adverse effects. The potential treatment for this type of pain remains unmet. Increased tetrahydrobiopterin (BH4) levels have been reported in association with axonal injury. This study aimed to evaluate the effect of tranilast on relieving neuropathic pain in animal models and analyze the changes in BH4 synthesis. Neuropathic pain was induced via infraorbital nerve constriction. Tranilast, carbamazepine, or saline was injected intraperitoneally to assess the rat’s post-intervention pain response. In the von Frey’s test, the tranilast and carbamazepine groups showed significant changes in the head withdrawal threshold in the ipsilateral whisker pad area. The motor coordination test showed no changes in the tranilast group, whereas the carbamazepine group showed decreased performance, indicating impaired motor coordination. Trigeminal ganglion tissues were used for the PCR array analysis of genes that regulate the BH4 pathway. Downregulation of the sepiapterin reductase (Spr) and aldoketo reductase (Akr) genes after tranilast injection was observed compared to the pain model. These findings suggest that tranilast effectively treats neuropathic pain.     

乙酸丁酯反应精馏过程模拟设计

反应精馏偶合了反应和精馏两种单元操作,通过精馏促进反应,可以提高反应转化率和收率,为可逆反应的化工过程生产提供了新的设计途径。基于严格热力学分析计算,利用计算机模拟和优化手段。提出了乙酸丁酯反应精馏、分离纯化的生产流程。采用UNIQUAC方程表征乙酸-正丁醇-乙酸丁酯-水四元非理想体系的汽液平衡,首先,根据实验数据回归了热力学模型中的交互作用参数,并预测了体系中5个共沸物组成,模型的计算结果与实际数据吻合。基于平衡级模型,提出了由平衡反应器、反应精馏塔、倾析器和纯化塔构成的可行流程,对提出的设计流程进行了模拟、优化,得到了操作工艺参数。模拟结果对工业过程的设计和改造具有一定的指导意义。     

Deoxidation of Ti Melt by Newly Developed Two-Step Plasma Arc Melting Process Using Hydrogen

Metallurgical and Materials Transactions B - A two-step plasma arc melting process, comprising a first step under Ar-30 pct H2 gas flow and the second step under Ar gas flow, has been...     

Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

Effect of wall wettability condition on drift-flux parameters in lead–bismuth two-phase flow in circular and annular bubble columns

Lead–bismuth two-phase flow in a cylindrical vessel and annulus was experimentally investigated by varying the surface wettability of the vessel wall. The test section used in this study was a cylindrical stainless vessel with/without inner sleeve to change the hydraulic diameter. Volume-averaged void fraction was measured by varying the surface wettability of the test section, which was enhanced by using a soldering flux. Measured void fraction was compared with existing two-phase flow correlations and with one-dimensional theoretical simulations assuming one-dimensional drift-flux model. From experimental results, measured distribution parameters of the lead–bismuth two-phase flow are much larger than that of ordinary two-phase flow regardless of the surface wettability. In the present work, the one-dimensional analysis was carried out for the cylindrical vessel to reproduce the distribution parameter. From the simulation results, predicted value for the cylindrical vessel showed good agreement with experimental results. However, in annulus, the distribution parameters in annulus were underestimated by the present model. It was suggested that, in case of annulus, steeper void fraction profile might be formed near the inner surface for poor wettability condition.     

Characterization of electrode/electrolyte interface for lithium batteries using in situ synchrotron X-ray reflectometry—A new experimental technique for LiCoO2 model electrode

A new experimental technique was developed for detecting structure changes at electrode/electrolyte interface of lithium cell using X-ray reflectometry and two-dimensional model electrodes with a restricted lattice-plane. The electrodes were constructed with an epitaxial film of LiCoO₂ synthesized by pulsed laser deposition method. The orientation of the epitaxial film depends on the substrate plane; the 2D layer of LiCoO₂ is parallel to the SrTiO₃ (1 1 1) substrate (_(0 0 3)LiCoO₂//_(1 1 1)SrTiO₃)$({(003)}_{\text{LiCo}{\text{O}}_2}//{(111)}_{\text{SrTi}{\text{O}}_3})$, while the 2D layer is perpendicular to the SrTiO₃ (1 1 0) substrate (_(1 1 0)LiCoO₂//_(1 1 0)SrTiO₃)$({(110)}_{\text{LiCo}{\text{O}}_2}//{(110)}_{\text{SrTi}{\text{O}}_3})$. The anisotropic properties were confirmed by electrochemical measurements. Ex situ X-ray reflectivity measurements indicated that the impurity layer existed on the as-grown LiCoO₂ was dissolved and a new SEI layer with lower density was formed after soaking into the electrolyte. In situ X-ray reflectivity measurements indicated that the surface roughness of the intercalation (1 1 0) plane increased with applying voltages, while no significant changes in surface morphology were observed for the intercalation non-active (0 0 3) plane during the pristine stage of the charge–discharge process.     

All solid-state battery with sulfur electrode and thio-LISICON electrolyte

A high-capacity type of all solid-state battery was developed using sulfur electrode and the thio-LISICON electrolyte. New nano-composite of sulfur and acetylene black (AB) with an average particle size of 1–10 nm was fabricated by gas-phase mixing and showed a reversible capacity of 900 mAh g⁻¹ at a current density of 0.013 mA cm⁻².     

Equilibrium and kinetic studies of selective adsorption and separation for strontium using DtBuCH18C6 loaded resin

A crown ether loaded resin was prepared by successive impregnation and fixing the 4′,4′(5″)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) and its molecule modifier, 1-dodecanol, onto the porous silica/polymer composite support (SiO₂-P particles). The characterization of DtBuCH18C6 loaded resin was examined by thermal gravimetry and differential thermal analysis and electron probe microanalysis. The adsorption behavior of Sr(II), Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) was investigated by the batch method. Furthermore, the column test for Sr (II) was performed. The batch experiments were carried out by varying the shaking times, HNO₃ concentration, and initial concentration of metal ions. A relatively large K _d value above 182 cm³/g for Sr(II) was obtained in the presence of 3 M HNO₃. In contrast, the K _d values of Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) were considerably lower than 10 cm³/g. The adsorption of Sr(II) was found to be controlled by chemisorption mechanism, and followed a Langmuir-type adsorption equation. The breakthrough curve of Sr(II) had S-shaped profile, and the elution percentage was estimated to be 99.9% by using the eluent of H₂O.     

Multiresidue method for pesticides and veterinary drugs in bovine milk using GC/MS and LC/MS/MS

A simple, sensitive and selective method with gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS) has been developed to detect 342 pesticides and veterinary drugs contaminating bovine milk at the maximum residue limits (MRLs) defined in the "positive list system". Sample preparation was performed by extracting the analytes with acetonitrile, followed by salting-out with sodium chloride. For some pesticides, the extract was further cleaned up by n-hexane partitioning and PSA cartridge column chromatography. GC/MS-EI or -NCI was used to determine pesticide residues, while LC/MS/MS-ESI was applicable to the determination of pesticide and veterinary drug residues. The variation of the recoveries of these drugs at MRL was relatively wide; however the relative standard deviations of the recovery of each drug were within 28%, suggesting that the present method is good enough for use as a screening test for contaminants at the MRLs. These results show that this method is useful for multiresidue analysis of numerous pesticides and veterinary drugs in bovine milk.