Features of a control blade degradation observed in situ during severe accident conditions in boiling water reactors

In the present paper, new results using in situ video are presented regarding boiling water reactor (BWR) control blade degradation up to 1750 K at the beginning of a nuclear severe accident. Energy-dispersive X-ray spectrometry (EDS) mapping indicated stratification of the absorber blade melt with formation of a chromium and boride-enriched layer. High-content-B- and C-containing material with increased melting temperature acted like a shielding and was found to prevent further relocation of control blade claddings. The interacted layers around the B₄C-granules prevented direct steam attack of residual B₄C. The results provide new insights for understanding of the absorber blade degradation mechanism under reducing conditions specific to Fukushima Dai-Ichi Unit 2 resulting from prolonged steam starvation.     

高密度磁记录技术研究综述

大数据时代对大容量磁盘的需求日益增长,而在对现有的磁盘不进行较大改动的前提下,叠瓦式磁记录技术SMR是提高磁盘存储容量的最佳选择.近年来,兴起了一种新的磁记录技术——交错式磁记录技术IMR,它可以获得比SMR更高的存储密度和随机写性能.首先介绍了SMR磁盘的内部叠瓦式结构以及由此带来的数据写放大问题,并对缓解数据写放大问题的数据管理方式、性能特性评测以及基于SMR的上层应用系统方面的研究进展进行了概述;然后对新兴的IMR磁盘内部结构及其数据写放大问题进行了介绍,并对其将来的研究方向做了一定的分析和展望;最后对SMR磁盘和IMR磁盘在存储密度、数据写性能等方面进行了比较分析.当前有很多基于SMR磁盘的上层应用系统,这表明SMR磁盘可以高效地替代传统磁盘来构建大型的存储系统,而IMR磁盘的优势也将使其未来的发展前景可期.     

Influence of Metal Salts Addition on Physical and Electrochemical Properties of Ethyl and Propylammonium Nitrate

In this work, we deepen in the characterization of two protic ionic liquids (PILs), ethylammonium nitrate (EAN) and propylammonium nitrate (PAN). With this aim, we determined the influence of inorganic nitrate salts addition on their physical properties and their electrochemical potential window (EPW). Thus, experimental measurements of electrical conductivity, density, viscosity, refractive index and surface tension of mixtures of {EAN or PAN + LiNO₃, Ca(NO₃)₂, Mg(NO₃)₂ or Al(NO₃)₃} at a temperature range between 5 and 95 °C are presented first, except for the last two properties which were measured at 25 °C. In the second part, the corresponding EPWs were determined at 25 °C by linear sweep voltammetry using three different electrochemical cells. Effect of the salt addition was associated mainly with the metal cation characteristics, so, generally, LiNO₃ showed the lower influence, followed by Ca(NO₃)₂, Mg(NO₃)₂ or Al(NO₃)₃. The results obtained for the EAN + LiNO₃ mixtures, along with those from a previous work, allowed us to develop novel predictive equations for most of the presented physical properties as functions of the lithium salt concentration, the temperature and the water content. Electrochemical results showed that a general order of EPW can be established for both PILs, although exceptions related to measurement conditions and the properties of the mixtures were found.     

The processing of fiber reinforced thermoplastics using co-rotating twin screw extruders

For short fiber reinforced thermoplastics the effect of fiber length and the fiber/matrix bond on the ultimate properties of the material are well understood. But, how the process conditions under which the composite is made affect the fiber length and the fiber matrix bond has not been so thoroughly reported in the literature. A study of this relationship has been made on a co-rotating twin screw extruder incorporating 30 percent by weight of glass fiber into nylon 66 to make the composite. Experimental results are presented to show how machine variables such as mixing configuration and screw speed affect the material properties and process efficiency. The properties of the composite were assessed by measurement of the fiber length distribution and tensile strength. From the results in the text it is possible to select machine variables to give desired production conditions. Although most of the work concerns the twin screw extruder, some of the consequences of subsequent injection molding are also shown.     

The performance of a distributed combat simulation with the time warp operating system

This paper analyzes the performance of a discrete-event combat simulation executed on a parallel processor under control of the Time Warp Operating System. Time Warp is in a class of distributed simulation methods called Optimistic methods which have proven to be useful over a wide range of simulations. The combat simulation used for this performance study, called STB88, is a division-corps model incorporating a number of different types of computations. The speed-up for three versions of this model on the Caltech/JPL Mark III Hypercube and the BBN Butterfly parallel processors was measured relative to an efficient sequential execution of the same model on the same hardware. The results indicate that STB88 version 1 achieves a speed-up of 28.6 on 60 Mark III processors, while STB88 version 2 achieves a speed-up of 36.8 on 100 Butterfly processors. Version 3 of STB88 achieved a speed-up of 38.5 on 128 Mark III processors. The versions differed only in their interface to Time Warp. On the Butterfly, the sequential execution completed in 2 hours, while the 100 processor execution completed in 3.2 minutes.     

An Objective Illustration of the Inadequacy of the Official EC “Ewers” Method for the Determination of Starch

The Ewers method for starch determination is currently the Official EEC method for measurement of starch purity. In this communication we demonstrate that the use of trifluroacetic acid for solubilisation of starch prior to polarimetric measurements is preferred over the use of mineral acids since the degree of hydrolytic degradation observed with this reagent was minimal compared to mineral acids, thereby giving improved starch purity values. Of particular concern we demonstrate that the Ewers method is non-specific in that the addition of an epichlorohydrin cross-linked dextran as an adulterant enhances the value of starch purity obtained. The Ewers method however was able to detect agarose and carboxymethyl cellulose added to starch as adulterants. It is concluded that the Ewers method is not an acceptably satisfactory method for starch purity measurement on which to base quality control or eligibility for rebate and refund schemes.     

The Association between Gut Microbiota and Osteoarthritis: Does the Disease Begin in the Gut?

Some say that all diseases begin in the gut. Interestingly, this concept is actually quite old, since it is attributed to the Ancient Greek physician Hippocrates, who proposed the hypothesis nearly 2500 years ago. The continuous breakthroughs in modern medicine have transformed our classic understanding of the gastrointestinal tract (GIT) and human health. Although the gut microbiota (GMB) has proven to be a core component of human health under standard metabolic conditions, there is now also a strong link connecting the composition and function of the GMB to the development of numerous diseases, especially the ones of musculoskeletal nature. The symbiotic microbes that reside in the gastrointestinal tract are very sensitive to biochemical stimuli and may respond in many different ways depending on the nature of these biological signals. Certain variables such as nutrition and physical modulation can either enhance or disrupt the equilibrium between the various species of gut microbes. In fact, fat-rich diets can cause dysbiosis, which decreases the number of protective bacteria and compromises the integrity of the epithelial barrier in the GIT. Overgrowth of pathogenic microbes then release higher quantities of toxic metabolites into the circulatory system, especially the pro-inflammatory cytokines detected in osteoarthritis (OA), thereby promoting inflammation and the initiation of many disease processes throughout the body. Although many studies link OA with GMB perturbations, further research is still needed.