A method for quantification of nuclear reactor seismic risk due to design and construction errors based on deficiencies identified in the past

This paper proposes a plausible methodology for quantification of risk due to seismic related design and construction errors in nuclear power plants. This is based on information available on errors discovered in the past, as reported in construction deficiency reports pursuant to US NRC regulations. Deficiencies found during construction whose recurrence is considered possible are included. The possibility of deficiencies not being discovered is evaluated by comparison of data between operating plants and those under construction. Error consequences are also evaluated from construction deficiency reports; in particular, the impact of errors on the seismic capacity of the plants is quantified by an extension of seismic probabilistic risk assessment (PRA) methods.The application of the method is illustrated based on a limited review of data, showing its capabilities and limitations. Some tentative results are presented, but these by no means represent a formal assessment.     

An integrated architecture for the ITER RH control system

The ITER remote handling (RH) system has been divided into 7 major equipment system procurements that deliver complete systems (operator interfaces, equipment controllers, and equipment) according to task oriented functional specifications. Each equipment system itself is an assembly of transporters, power manipulators, telemanipulators, vehicular systems, cameras, and tooling with a need for controllers and operator interfaces.From an operational perspective, the ITER RH systems are bound together by common control rooms, operations team, and maintenance team; and will need to achieve, to a varying degree, synchronization of operations, co-operation on tasks, hand-over of components, and sharing of data and resources. The separately procured RH systems must, therefore, be integrated to form a unified RH system for operation from the RH control rooms.The RH system will contain a heterogeneous mix of specially developed RH systems and off-the-shelf RH equipment and parts. The ITER Organization approach is to define a control system architecture that supports interoperable heterogeneous modules, and to specify a standard set of modules for each system to implement within this architecture. Compatibility with standard parts for selected modules is required to limit the complexity for operations and maintenance. A key requirement for integrating the control system modules is interoperability, and no module should have dependencies on the implementation details of other modules.The RH system is one of the ITER Plant systems that are integrated and coordinated through the hierarchical structure of the ITER CODAC system. It is distinguished from other Plant systems by the man-in-the-loop nature of RH operations and the need for control rooms at a level below the main control room. The RH control system architecture has been designed to also support the central monitoring and coordination of the RH activities.     

Statistical approach and benchmarking for modeling of multi-dimensional behavior in TRISO-coated fuel particles

The fundamental design for a gas-cooled reactor relies on the behavior of the coated particle fuel. The coating layers, termed the TRISO coating, act as a mini-pressure vessel that retains fission products. Results of US irradiation experiments show that many more fuel particles have failed than can be attributed to one-dimensional pressure vessel failures alone. Post-irradiation examinations indicate that multi-dimensional effects, such as the presence of irradiation-induced shrinkage cracks in the inner pyrolytic carbon layer, contribute to these failures. To address these effects, the methods of prior one-dimensional models are expanded to capture the stress intensification associated with multi-dimensional behavior. An approximation of the stress levels enables the treatment of statistical variations in numerous design parameters and Monte Carlo sampling over a large number of particles. The approach is shown to make reasonable predictions when used to calculate failure probabilities for irradiation experiments of the New Production - Modular High Temperature Gas Cooled Reactor Program.     

Improving the energy production of roof-top solar PV systems through roof design

Building Simulation - Australia is receiving an average of 58 million PJ of solar radiation per year, which is about 1000 times larger than its total energy generation. Roof-top solar photovoltaic...     

The optimization of electrolyte flow management to increase the performance of Zn–air fuel cells

Zinc (Zn)–air fuel cells (ZAFCs) are one of the potential alternatives to fossil fuels. Because a flowing electrolyte can directly affect cell performance, we focused on the electrolyte management of a ZAFC. The ZAFC galvanostatic discharge was examined to determine its performance. The electrolyte concentration, temperature, and circulation rate were used as the operating parameters for discharge tests, and the relationship between electrolyte and cell performance was discussed based on the experimental results. To elucidate the effect of electrolyte-flow, the computation fluid dynamic simulations have been first performed. The results revealed that the cell performance associating the remnant oxygen in the electrolyte channel     

Radon and moisture impacts from interventions integrated with housing energy retrofits

Energy retrofits can reduce air exchange, raising the concern of whether indoor radon and moisture levels could increase. This pre/post-intervention study explored whether simple radon interventions implemented in conjunction with energy retrofits can prevent increases in radon and moisture levels. Treatment homes (n = 98) were matched with control (no energy retrofits or radon intervention) homes (n = 12). Control homes were matched by geographic location and foundation type. t-tests were used to determine whether post-energy retrofit radon and moisture level changes in treatment homes significantly differed from those in control homes. The radon interventions succeeded in preventing statistically significant increases in first floor radon using arithmetic (p = 0.749) and geometric means (p = 0.120). In basements, arithmetic (p = 0.060) and geometric (p = 0.092) mean radon levels statistically significantly increased, consistent with previous studies which found that basement radon levels may increase even if first floor levels remain unchanged. Changes in infiltration were related to changes in radon (p = 0.057 in basements; p = 0.066 on first floors). Only 58% of the change in infiltration was due to air sealing, with the rest due to weather changes. There was no statistically significant association between air sealing itself and radon levels on the first floor (p = 0.664). Moisture levels also did not significantly increase.     

The Role of Cholesterol on Triterpenoid Saponin-Induced Endolysosomal Escape of a Saporin-Based Immunotoxin

Cholesterol seems to play a central role in the augmentation of saporin-based immunotoxin (IT) cytotoxicity by triterpenoid saponins. Endolysosomal escape has been proposed as one mechanism for the saponin-mediated enhancement of targeted toxins. We investigated the effects of lipid depletion followed by repletion on Saponinum album (SA)-induced endolysosomal escape of Alexa Fluor labelled saporin and the saporin-based immunotoxin OKT10-SAP, directed against CD38, in Daudi lymphoma cells. Lipid deprived cells showed reduced SA-induced endolysosomal escape at two concentrations of SA, as determined by a flow cytometric method. The repletion of membrane cholesterol by low density lipoprotein (LDL) restored SA-induced endolysosomal escape at a concentration of 5 µg/mL SA but not at 1 µg/mL SA. When LDL was used to restore the cholesterol levels in lipid deprived cells, the SA augmentation of OKT10-SAP cytotoxicity was partially restored at 1 µg/mL SA and fully restored at 5 µg/mL SA. These results suggest that different mechanisms of action might be involved for the two different concentrations of SA and that endosomal escape may not be the main mechanism for the augmentation of saporin IT cytotoxicity by SA at the sub-lytic concentration of 1 µg/mL SA.     

Prebiotic Origin of Pre-RNA Building Blocks in a Urea “Warm Little Pond” Scenario

Urea appears to be a key intermediate of important prebiotic synthetic pathways. Concentrated pools of urea likely existed on the surface of the early Earth, as urea is synthesized in significant quantities from hydrogen cyanide or cyanamide (widely accepted prebiotic molecules), it has extremely high water solubility, and it can concentrate to form eutectics from aqueous solutions. We propose a model for the origin of a variety of canonical and non-canonical nucleobases, including some known to form supramolecular assemblies that contain Watson-Crick-like base pairs.The dual nucleophilic-electrophilic character of urea makes it an ideal precursor for the formation of nitrogenous heterocycles. We propose a model for the origin of a variety of canonical and noncanonical nucleobases, including some known to form supramolecular assemblies that contain Watson-Crick-like base pairs. These reactions involve urea condensation with other prebiotic molecules (e. g., malonic acid) that could be driven by environmental cycles (e. g., freezing/thawing, drying/wetting). The resulting heterocycle assemblies are compatible with the formation of nucleosides and, possibly, the chemical evolution of molecular precursors to RNA. We show that urea eutectics at moderate temperature represent a robust prebiotic source of nitrogenous heterocycles. The simplicity of these pathways, and their independence from specific or rare geological events, support the idea of urea being of fundamental importance to the prebiotic chemistry that gave rise to life on Earth.