Study of stability of high‐temperature polyimides using TG/MS technique

The oxidative stability of the carbon fiber‐reinforced composite of polyimide was examined, in real time, using the evolved gas analysis techniques. Off‐gas degradation products suggested the onset temperature for chain scissions to be fairly low at about 190–220°C. Based on the off‐gas products present and the trend of their release, the composite degradation mechanism appeared to be similar between 190 and 371°C, thereby marking 371°C to be the highest accelerated aging temperature for its long‐term lifetime prediction. Beyond 371°C, different degradation mechanisms would apply. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1219–1227, 2002     

明胶中过氧化物的控制

在用药用明胶为主要原料生产药用空心胶囊的生产中,由于明胶中的过氧化物对胶囊中各种色素的颜色具有氧化褪色作用,胶囊产品放置时间过长,其颜色就会发生变化,加上药品自身安全性的要求等原因,故国内引进的外国胶囊生产线对明胶原料中的过氧化物含量的要求特别严格,要求明胶中不得检出过氧化物成分.尽管目前我国药典和轻工行业对药用明胶标准未作过氧化物含量的规定,相信很多生产药用空心胶囊的厂家对此项目都有内控标准,如本胶囊公司就规定,凡对购进的明胶均不得检出过氧化物成分,否则一律退货.笔者相信,不久的将业,药用明胶的标准修订肯定会增加过氧化物含量的规定.为此,明胶生产企业就必须在明胶生产中严格控制过氧化物的含量,使其达到客户的要求.     

淤浆法HDPE装置低聚物不能结片原因探析

分析了淤浆法HDPE装置低聚物不能结片的原因,并提出了相应的工艺处理措施。     

Surface photografting polymerization of vinyl acetate,maleic anhydride,and their charge‐transfer complex. VI. Charge‐transfer complex (2)

The photografting copolymerization of a low‐density polyethylene/vinyl acetate (VAC)–maleic anhydride (MAH) binary monomer system was studied from the perspective of dynamics. The total conversion percentage (CP) and grafting conversion percentage (CG) were measured by gravimetry. On the basis of plots of CP and CG as functions of the polymerization time, the total polymerization rate (RP) and grafting polymerization rate (RG) were calculated. In addition, the apparent activation energy (E_a) and the reaction orders of the photografting polymerization under different reaction conditions, such as the total monomer concentration and the concentration of benzophenone (BP), were determined also. The results showed that, in comparison with the photografting polymerization of the two single monomers (VAC and MAH), RP and RG noticeably increased for the VAC–MAH binary monomer system. When the total monomer concentration was kept at 4M, the apparent E_a's of the three photografting polymerization systems were as follows: for VAC ([MAH]/[VAC] = 0/4), E_a's for the total polymerization and grafting polymerization were 41.00 and 43.90 kJ/mol, respectively; for MAH ([MAH]/[VAC] = 4/0, E_a's were 39.65 and 43.23 kJ/mol, respectively; and for the VAC–MAH binary monomer system, E_a's were 34.35 and 40.32 kJ/mol, respectively. These results suggested that the polymerization of the binary system occurred more readily than the other two. The reaction orders of RP with respect to the total monomer concentration of the monomers and the concentration of BP were 1.34 and 0.81, respectively. According to these investigations, it could be inferred that in the binary monomer system, both the free monomers and charge‐transfer complex took part in the polymerization; to the termination of the propagating chains, two possible pathways, unimolecular termination and bimolecular termination, coexisted in this binary monomer system. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 910–915, 2005     

Al2O3／TiB2／SiCW陶瓷刀具加工镍基合金时的磨损机理研究

研究了Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ陶瓷刀具加工Ｉｎｃｏｎｅｌ７１８镍基合金时的切削性能和磨损机理。结果表明；在低速切削条件下，Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ和硬质合金刀具的抗后刀面磨损的能力相差不大；而在高速切削条件下，前者的抗后刀面磨能力远高于后者。     

关于“不受《容规》监察的受压容器”技术要求的讨论

本文首先分析了《容规》所监察的压力容器的介质范围和GB150等压力容器标准的适用介质,讨论了不同介质的“不受《容规》监察的受压容器”技术要求的处理办法,并列举了简单的设计实例。     

结晶性高聚物作为相变材料的应用

本文研究了结晶性高聚物聚乙烯及其共混物作为相变材料对模拟发热体铜片热量的吸收作用，由于相变的吸热，铜片的温度在一定时间范围内保持在一个定值。选择不同的相变材料，可使这种温度平台出现在不同的温度范围，不共晶的共混物可有两个以上的温度平台，提高了降温效果。     

Comprehensive Benefit Evaluation System for Low-Impact Development of Urban Stormwater Management Measures

In recent years, plenty of simulation research about the low impact development(LID) control effect has emerged, but studies on scheme comparison and evaluation are lacking. In this study, a comprehensive benefit evaluation system for LID, including environmental, economic, and social benefits, was established on the basis of Analytic Hierarchy Process(AHP) and urban storm water model. Above all, benefit identification, quantitative evaluation and scheme comparison of single LID measures were obtained according to site investigation, simulated calculation and theoretical analysis. Whereafter, LID combination plans were designed based on single LID measures with high comprehensive benefit values, and their comprehensive benefits were evaluated to obtain the optimal plan. Then, based on well-founded system combined with Storm Water Management Model (SWMM), the design and optimization of LID were conducted, with a case in Xi’an, China. It turned out that the preferential order of the LID single measures according to the comprehensive benefit was: bio-retention > rain barrels > low-elevation greenbelt > green roofs > permeable pavement. Five LID combination plans were designed based on bio-retention, rain barrels, low-elevation greenbelt, and green roofs. Evaluation results showed that plan I (bio-retention and green roofs) was the optimal LID combination plan.     

溶剂对维生素C单晶生长动力学的影响

引　言当过饱和溶液中产生晶核或加入晶种时 ,溶质分子在过饱和度的推动下使晶核或晶种长大的过程就是晶体生长 .晶体生长动力学决定了晶体产品的形态及其物理性质 ,是结晶过程设计、优化和操作的基础 ,在结晶过程研究中占有重要地位[1,2 ] .晶体生长的外部条件例如过饱和度、温度、溶剂等都直接影响到晶面吸附情况的变化、晶体比表面自由焓 ,从而影响晶面的生长速度[3,4 ] .单晶研究是借助于显微镜、照相机、衍射仪等观察手段测定单晶各方向的尺寸随时间的变化 ,确定晶体生长动力学的方法[5] .作者曾采用间歇动态法实验测试维生素C在水 乙…     

Distributed receding horizon control of large-scale nonlinear systems: Handling communication delays and disturbances

This paper studies the robust distributed receding horizon control (DRHC) problem for large-scale continuous-time nonlinear systems subject to communication delays and external disturbances. A dual-mode robust DRHC strategy is designed to deal with the communication delays and the external disturbances simultaneously. The feasibility of the proposed DRHC and the stability of the closed-loop system are analyzed, and the sufficient conditions for ensuring the feasibility and stability are developed, respectively. We show that: (1) the feasibility is affected by the bounds of external disturbances, the sampling period and the bound of communication delays; (2) the stability is related to the bounds of external disturbances, the sampling period, the bound of communication delays and the minimum eigenvalues of the cooperation matrices; (3) the closed-loop system is stabilized into a robust invariant set under the proposed conditions. A simulation study is conducted to verify the theoretical results.