Self-consistent calculation of the lasing eigenmode of thedielectrically apertured Fabry-Perot microcavity with idealized ordistributed Bragg reflectors

Optical confinement in the dielectrically apertured Fabry-Perot microcavity is investigated theoretically. The apertured region is first treated as embedded in an idealized planar waveguide to show that the confined eigenmode's resonant frequency can cut off parasitic waveguide modes existing outside the aperture, and lead to three-dimensional optical confinement. For more realistic cavities with nonunity mirror reflectivities, self-consistent calculations of the eigenmode characteristics are performed for the limit of an optically thin aperture to derive the lowest order confined eigenmode frequency, threshold susceptibility, and mode profile. The analysis is then extended to treat dielectric cavities based on Bragg reflectors     

高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

应用硫酸铵提高乌拉嗄金矿石浮选回收率试验研究

经试验发现应用一种化学肥料硫酸铵可以显著提高乌拉嘎金矿石的浮选回收率。闭路试验尾矿工艺矿物学鉴定证明，以硫酸铵作为调整剂的浮选过程中，微细粒单体金和金与石英边生体被有效回收。     

平面扇形可倾瓦气体推力轴承的优化设计

气体动压轴承在小型透平机械中有着诱人的应用前景．本文介绍了平面扇形可倾瓦气体推力轴承的工作特性计算及其参数优化的方法．利用自编的软件取得了瓦块最佳直径比和支承位置等参数的优化结果，并且在微机上实现了该种轴承的优化设计．     

高分辨率电阻率测井仪在薄层评价中的应用

传统的测井仪器无法克服纵向分辨率和径向探测深度这一矛盾，高分辨率电阻率测井仪（HDRT）测量精度好、探测深度大且垂向分辨率高，能够准确识别薄互层、评价薄油气层，准确记录油层厚度，可为精细描述油气田地下地质状态提供更多依据。     

皮革去污上光用乳化蜡的研制

采用石蜡、微晶蜡为主要原料 ,经实验选出了以水为稀释剂的乳化型皮革去污上光蜡。实验优化的配方为石蜡 12 .5 g ,微晶蜡 8.0 g ,硬脂酸 8.5g ,三乙醇胺 5 .5 g ,水量 70 (涂用 )或 130 g(喷用 )。反应条件为乳化时间 4 0min ,搅拌速度 5 0 0～ 70 0r/min ,乳化温度 90℃。制得上光剂产品的去污性能可与用去污剂单独处理的效果相当 ,亮度可达 6 6 .7。     

SAW滤波器简化衍射频响的计算方法

提出了由一个变迹ＩＤＴ叉指换能器和一个均匀ＩＤＴ组成的ＳＡＷ滤波器简化衍射频响的计算方法，即将均匀ＩＤＴ简化成单根指计算其衍射频响。该方法与未简化衍射频响的计算方法相比，计算量大为减小，前者约为后者的（Ｎ为均匀ＩＤＴ的指对数）。并给出了一个实例，用未简化与简化方法分别计算了其衍射频响，结果表明，两者符合得较好。     

压力对Fe－29wt％Ni合金超细微粒特性的影响

利用蒸发冷凝法，制备了不同平均粒径的Ｆｅ－２９ｗｔ％Ｎｉ合金超细微粒。在不同压强下，将超细微粒压制成片。随压强增大，马氏体体积分数和比饱和磁化强度σｓ明显增大，而矫顽力Ｈｃ呈线性下降。压力效应与平均粒径ｄ大小密切相关     

电容检测纱线传感器转换特性对纱线不匀率测试的影响

讨论了纱线测试中受电容检测纱线传感器转换特性的非线性影响，测得的条干不匀率值与纱线的实际条干不匀率值之间的差异，从理论上估计了纱线在不同的电容检测槽内测试时，由于其截面充满系数不同而引起的相对差异，并用试验数据加以验证。     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006