Early age strength enhancement of blended cement systems by CaCl2 and diethanol-isopropanolamine

The enhancement of the 1 day strength of cementitious systems by a combination of calcium chloride (CaCl₂) and diethanol-isopropanolamine (DEIPA) was studied, particularly in blended cement systems. A combination of quantitative X-ray diffraction with Rietveld refinement (QXRD), scanning electron microscopy (SEM)/backscattered electron image analysis, thermogravimetric analysis (TGA), and isothermal calorimetry were used to investigate the mechanism of strength enhancement by the additives. The additives were found to increase the early age mortar strength by enhancing the cement hydration, with the DEIPA enhancing primarily the aluminate hydration. DEIPA also affected the morphology of portlandite which was formed as thin plates. In parallel, the calcium-to-silica ratio of the C-S-H was found to increase with the use of DEIPA, possibly because of the inclusion of microcrystalline portlandite. After 48 h DEIPA was found to directly enhance the rate of reaction of granulated blast-furnace slag and fly ash.     

Use of Volatiles as Indicators of Lipid Oxidation in Muscle Foods

Lipid oxidation has long been recognized as a leading cause of quality deterioration in muscle foods and is often the decisive factor in determining food product storage life. Lipid oxidation generates a number of products, including volatile compounds, which are the major contributors to the development of rancid off‐flavors and odors. Over the years, methodologies have been developed to quantify lipid oxidation products in muscle foods. This article reviews the analytical methods that have been used to quantify volatile compounds as indicators of lipid oxidation in muscle foods. The sampling methodologies of distillation/solvent extraction and headspace analysis, and isolation methods associated with gas chromatographic (GC) and high‐performance liquid chromatography (HPLC) analyses are discussed. Within gas chromatographic methodologies, headspace (HS) sampling (static HS, dynamic purge‐and‐trap HS techniques, and solid‐phase microextraction [SPME]) are addressed.     

COMPARISON OF DETOXIFICATION ENZYME mRNAS IN WOODRATS (Neotomalepida) AND LABORATORY RATS

To understand how mammalian herbivores process plant secondary compounds, we examined differences in expression of biotransformation enzyme mRNAs among populations of wild woodrats (Neotoma lepida) and laboratory rats. We compared expression of mRNAs for 10 biotransforming enzymes in five families (CYP, mEH, QOR, GST, and UGT) by using Northern blot analysis. We found significant differences in eight of 10 mRNAs tested. We suggest that the differences in mRNA expression among populations of woodrats and laboratory rats may be due to differences in the secondary compound composition of their diets. Our results provide background for future studies of detoxification strategies in mammalian herbivores that combine pharmacological techniques with an ecological perspective.     

Detoxification in Relation to Toxin Tolerance in Desert Woodrats Eating Creosote Bush

We studied the relationship between the use of three detoxification pathways and urine pH and the tolerance of desert woodrats from two populations to a mixture of naturally occurring plant secondary metabolites (mostly phenolics) in resin from creosote bush (Larrea tridentata). The two populations of desert woodrats came from the Mojave desert (Mojave woodrats), where woodrats consume creosote bush, and from the Great Basin desert (Great Basin woodrats), where the plant species is absent. We fed woodrats alfalfa pellets containing increasing levels of the phenolic resin and measured three detoxification pathways and urine pH that are related to detoxification of allelochemicals. We found that the excretion rate of two phase II detoxification conjugates, glucuronides and sulfides, increased with increasing resin intake, whereas excretion of hippuric acid was independent of resin intake, although it differed between populations. Urine pH declined with increasing resin ingestion. The molar proportion of glucuronides in urine was three times that of the other conjugates combined. Based on an evaluation of variation in the three detoxification pathways and urine pH in relation to resin intake, we rejected the hypotheses that woodrats' tolerance to resin intake is related to capacity for amination, sulfation, or pH regulation. However, Mojave woodrats had higher maximum glucuronide excretion rates, and we accepted the hypothesis that within and between populations woodrats tolerate more resin because they have a greater capacity for glucuronide excretion.     

Performance of anaerobic bioreactor treating fish-processing plant wastewater pre-hydrolyzed with a solid enzyme pool

The effect of a lipase-rich enzyme preparation produced by the fungus Penicillium simplicissimum on solid-state fermentation was evaluated in a 4.9 L up-flow anaerobic sludge blanket bioreactor (UASB) treating fish-processing plant wastewater containing 1500 mg oil and grease (O&G)/L. The oil and grease hydrolysis step was carried out with 0.5% or 0.2% (w/v) of the solid enzyme preparation (SEP) at 30 °C for 8 h. The bioreactor operated at 30 °C with a hydraulic retention time of 10 h for a period of over 100 days, showed high total COD removal efficiencies (85.3% for 0.5% SEP and 90.9% for 0.2% SEP), when fed with pre-hydrolyzed wastewater, compared to a Control bioreactor fed with raw wastewater (79.9%). The Control bioreactor also showed high oil and grease accumulation in the biomass throughout the operational period (the O&G content reached 1.7 times that found in the inoculum of the UASB bioreactor), intensive scum formation, and several episodes of cessation of treatment to clean the three-phase separator. Thus it can be concluded that the enzyme pre-hydrolysis step together with anaerobic treatment of the fish-processing plant wastewater improved the quality of the treated effluent and reduced operational problems.     

Esters from castor oil functionalized with aromatic amines as a potential lubricant

Vegetable oils are very promising alternatives to fossil lubricants due to their abundance, low cost, excellent performance, and environmental friendliness. Due to its multifunctional structure, castor oil is an excellent precursor in the synthesis of new biolubricants. However, it showed poor thermal-oxidative stability and a higher pour point. This study used castor oil fatty acids prepared by transesterification (EHRO), epoxidation (TEPO), and oxirane ring opening with the aromatic amines aniline (ANIL) and p-anisidine (ANIS). The chemical structure of these oils was verified by ¹H and ¹³C NMR analysis, and mass spectrometry. Measurements show that the presence of an aromatic amine increases the viscosity resulting in 172 (ANIL) and 199 (ANIS) cSt at 40°C, but reduces viscosity index to 16 and 1, respectively. In addition, the amine groups can scavenge radicals increasing their thermal and oxidative stability. These products do not oxidize copper, and tribological analysis reveals that ANIS has the lowest torque with wear equivalent to commercial mineral lubricant NH-140.     

Assessing and building municipal open data capability

Information Systems and e-Business Management - In the past decade, cities around the world have published their open data as a new service. Some have used this service innovatively, as a vehicle...     

Superior Thermoelectric Performance of SiGe Nanowires Epitaxially Integrated into Thermal Micro-Harvesters

Semiconductor nanowires have demonstrated fascinating properties with applications in a wide range of fields, including energy and information technologies. Particularly, increasing attention has focused on SiGe nanowires for applications in a thermoelectric generation. In this work, a bottom-up vapour-liquid-solid chemical vapour Deposition methodology is employed to integrate heavily boron-doped SiGe nanowires on thermoelectric generators. Thermoelectrical properties –, i.e., electrical and thermal conductivities and Seebeck coefficient – of grown nanowires are fully characterized at temperatures ranging from 300 to 600 K, allowing the complete determination of the Figure-of-merit, zT, with obtained values of 0.4 at 600 K for optimally doped nanowires. A correlation between doping level, thermoelectric performance, and elemental distribution is established employing advanced elemental mapping (synchrotron-based nano-X-ray fluorescence). Moreover, the operation of p-doped SiGe NWs integrated into silicon micromachined thermoelectrical generators is shown over standalone and series- and parallel-connected arrays. Maximum open circuit voltage of 13.8 mV and power output as high as 15.6 µW cm⁻² are reached in series and parallel configurations, respectively, operating upon thermal gradients generated with hot sources at 200 °C and air flows of 1.5 m s⁻¹. These results pave the way for direct application of SiGe nanowire-based micro-thermoelectric generators in the field of the Internet of Things.     

Influence of Austempering Temperature on Microstructure and Mechanical Properties of High-Silicon Carbide-Free Bainitic Steel

The microstructural evolution of a novel high-silicon carbide-free bainitic steel at different austempering temperatures is investigated. The microstructure is evaluated by means of optical and electron microscopy, X-ray diffraction, microhardness, and nanohardness. Results show a variation in the amount of stabilized retained austenite changing the temperature of the isothermal treatment. In particular, it is observed an increase in the retained austenite volume fraction increasing the temperature up to 350 °C, while further increase leads to a reduction. Moreover, increasing the isothermal holding temperature from 250 °C, through 300, 350, and 370 °C, a progressive bainite coarsening and an increase in the amount of stabilized carbon-enriched retained austenite are observed. Tensile tests reveal an excellent combination of mechanical properties: mechanical strength in the range 1276–1988 MPa and total elongation 0.18–0.44.     

Femtosecond Ti: Sa ultra short-pulse laser irradiation effects on the properties and morphology of the zirconia surface after ageing

Femtosecond pulses from a Ti:Sapphire laser were used to irradiate specimens of yttria-stabilised (35% mol) tetragonal zirconia (Y-TZP) with the purpose of studying the effects of the irradiations on their surface properties and morphology after ageing. Zirconia disks were divided into eight groups (n = 32) according to their surface treatment and subsequent ageing: Control: no treatment; sandblasting: Al₂O₃ sandblasting 50 μm; and ultrashort laser pulses irradiation with 25 μJ pulses, considering two different scanning steps based on the width between two grooves. These groups were duplicated and submitted to ageing. The surfaces were analysed using scanning electron microscopy (SEM), and X-ray diffraction. A finite element analysis, a biaxial flexure test, as well as fractographic and Weibull analyses, were performed. The strengths of the disks were statistically different for the treatment factor, and the principal stresses seemed to be concentrated at the centre of the specimens, as predicted by the computer simulations. Ageing decreased the strengths for all groups and increased the Weibull modulus for the laser group with the 40 μm-width between two grooves. The sandblasting group presented the highest monoclinic phase peak. Although the most significant strength was found within the sandblasting group, the phase transformation was favourable to the laser groups. The Weibull modulus was higher for the laser group with the 60 μm-width between two grooves, confirming the highest homogeneity of its failure distribution. Regardless of the surface treatment, strength was decreased with ageing in all groups. The femtosecond Ti:Sa ultra-short pulse laser irradiation can be suggested as an alternative to the gold standard sandblasting in long-term Y-TZP zirconia rehabilitations, such as crowns and veneers.