Analysis of steelmaking kinetics from IMPHOS pilot plant data

It is widely accepted that understanding the kinetics of steelmaking is a complex task, and reliable and validated kinetics models are required for developing successful steelmaking process models. Therefore, as an initial attempt, this paper analyses the applicability of first order kinetics to explain the steelmaking reaction kinetics using the published data in the IMproving Phosphorus Refining research report. The process data for 20 heats in a 6?tonne pilot plant were analysed for the removal of carbon, silicon, manganese and phosphorus using first order kinetics with static and dynamic equilibrium conditions. It was observed that the removal behaviour of silicon closely followed a first order kinetics relationship, while that of carbon only approximately followed a first order kinetics relationship. The removal of manganese did not show a good degree of fit with first order kinetics using static equilibrium condition, but a clear improvement was observed when calculated using dynamic equilibrium condition. In contrast, the kinetics of phosphorus oxidation did not follow any first order relationship.     

Encapsulationof lycopene from watermelon in calcium‐alginate microparticles using an optimised inverse‐gelation method by response surface methodology

Lycopene exhibits strong antioxidant activity due to its unsaturated molecular bonds, which also contributes to its susceptibility for degradation. Encapsulation techniques can reduce lycopene degradation, increasing its potential applications in functional foods and nutraceuticals. The objective of this study was to optimise the encapsulation of lycopene from watermelon in alginate microparticles using the inverse gelation method. Box–Behnken design was used for the optimisation of three variables: concentrations of alginate (w/v %) and CaCl₂ (g L^?1), and gelation time (min). Two types of alginate were investigated (low viscosity and high viscosity) and optimised separately using encapsulation efficiency and loading capacity as responses. Results indicated that the models had a good fit to the experimental data and the optimal conditions varied depending on the type of alginate. In general, particles prepared with low‐viscosity alginate exhibited higher encapsulation efficiency and loading capacity and could be used for further research.     

Dielectric function of palladium capped zirconium thin films as a function of absorbed hydrogen

We report measurements of the optical transmission, between 240 and 1040 nm, and electrical resistivity of polycrystalline zirconium thin films as they absorb hydrogen. Both are measured as H₂ pressure is increased up to 880 mbar, at room temperature. Films, 20–22 nm thick, are deposited on fused quartz substrates by e-beam evaporation at 5.3 × 10^?7 mbar base pressure and covered with a 8.0 nm Pd over-coat. The morphology of the films is studied by means of AFM images. The complex refractive indices of Zr and Pd are extracted numerically from the transmission spectra by using a spectral projected gradient method for different hydrogen pressures. The corresponding dielectric functions for various Zr hydrogen concentrations are described with the parametric Drude-Lorentz and Brendel-Bormann (DL & BB) models. The Acceptance-Probability-Controlled Simulated Annealing approach is applied to calculate the parameters of the DL & BB model. This allows us to describe the effect of increasing hydrogen absorption on these parameters and in derived quantities, like the relaxation time and the effective mass of conduction electrons, the electrical resistance, the Fermi energy, and the electronic density of states at the Fermi level.     

Mechanical properties of morcellised bone graft with the addition of hydroxyapatite

Mixtures of morcellised bone graft (MBG) and hydroxyapatite (HA) are frequently used in revision arthroplasty surgery. However, the changes in the mechanical properties from adding HA to MBG are unknown. This study used a uniaxial compression test to replicate impaction bone grafting and subsequent early postoperative weightbearing to investigate the effect of adding different proportion of HA to MBG. To achieve this aim, human MBG was subjected to increasing impaction forces and the apparent stiffness and creep for each stress level determined. Subsequently, increasing proportions porous and non porous HA were added to the MBG. The major findings were that the apparent stiffness for MBG increased and the associated creep decreased both with the application of increasing stress and with the addition of increasing proportions of HA. In conclusion, greater proportions of HA in the graft mixture improved the mechanical response compared with MBG impacted under the same force. This improvement replicated the properties of pure MBG under high axial stress. This study indicates that graft mixtures of MBG and HA can be tailormade for patients. The need for less impaction force in MBG:HA mixtures to obtain the same properties as pure MBG may decrease the risk of intraoperative fracture.     

Nanoparticulate Delivery of Cancer Cell Membrane Elicits Multiantigenic Antitumor Immunity

Anticancer vaccines train the body's own immune system to recognize and eliminate malignant cells based on differential antigen expression. While conceptually attractive, clinical efficacy is lacking given several key challenges stemming from the similarities between cancerous and healthy tissue. Ideally, an effective vaccine formulation would deliver multiple tumor antigens in a fashion that potently stimulates endogenous immune responses against those antigens. Here, it is reported on the fabrication of a biomimetic, nanoparticulate anticancer vaccine that is capable of delivering autologously derived tumor antigen material together with a highly immunostimulatory adjuvant. The two major components, tumor antigens and adjuvant, are presented concurrently in a fashion that maximizes their ability to promote effective antigen presentation and activation of downstream immune processes. Ultimately, it is demonstrated that the formulation can elicit potent antitumor immune responses in vivo. When combined with additional immunotherapies such as checkpoint blockades, the nanovaccine demonstrates substantial therapeutic effect. Overall, the work represents the rational application of nanotechnology for immunoengineering and can provide a blueprint for the future development of personalized, autologous anticancer vaccines with broad applicability.     

A novel sphingophosphonolipid head group 1-hydroxy-2-aminoethyl phosphonate in Bdellovibrio stolpii

Members of the bacterial genus Bdellovibrio include strains that are free-living whereas others are known to invade and parasitize larger Gram-negative bacteria. The bacterium can synthesize several sphingophospholipid compounds including those with phosphoryl bonds as well as phosphonyl bonds. In the present study, the dominant sphingophosphonolipid component was isolated by column chromatography, and the long-chain bases, fatty acids, and polar head groups were identified by thin-layer and gas-liquid chromatographic procedures. The definitive structural identity of the sphingolipid was established by nuclear magnetic resonance and mass spectrometry of hydrolysis products and the intact compound. The compound was identified as N-2′-hydroxypentadecanoyl-2-amino-3,4-dihydroxyheptadecan-1-phosphono-(1-hydroxy-2-aminoethane).     

Progressive ratio schedules of reinforcement.

[Correction Notice: An erratum for this article was reported in Vol 35(2) of Journal of Experimental Psychology: Animal Behavior Processes (see record 2009-05154-003). The URL provided for the supplemental material was incomplete. The complete URL is http://dx.doi.org/10.1037/a0012497.supp] Pigeons' pecks produced grain under progressive ratio (PR) schedules, whose response requirements increased systematically within sessions. Experiment 1 compared arithmetic (AP) and geometric (GP) progressions. Response rates increased as a function of the component ratio requirement, then decreased linearly (AP) or asymptotically (GP). Experiment 2 found the linear decrease in AP rates to be relatively independent of step size. Experiment 3 showed pausing to be controlled by the prior component length, which predicted the differences between PR and regressive ratio schedules found in Experiment 4. When the longest component ratios were signaled by different key colors, rates at moderate ratios increased, demonstrating control by forthcoming context. Models for response rate and pause duration based on Bizo and Killeen (1997) described performance on AP schedules; GP schedules required an additional parameter representing the contextual reinforcement. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Torrefied biomass‐polypropylene composites

Torrefied almond shells and wood chips were incorporated into polypropylene as fillers to produce torrefied biomass‐polymer composites. The composites were prepared by extrusion and injection molding. Response surface methodology was used to examine the effects of filler concentration, filler size, and lignin factor (relative lignin to cellulose concentration) on the material properties of the composites. The heat distortion temperatures, thermal properties, and tensile properties of the composites were characterized by thermomechanical analysis, differential scanning calorimetry, and tensile tests, respectively. The torrefied biomass composites had heat distortion temperatures of 8–24°C higher than that of neat polypropylene. This was due to the torrefied biomass restricting mobility of polypropylene chains, leading to higher temperatures for deformation. The incorporation of torrefied biomass generally resulted in an increase in glass transition temperature, but did not affect melting temperature. Also, the composites had lower tensile strength and elongation at break values than those of neat polypropylene, indicating weak adhesion between torrefied biomass and polypropylene. However, scanning electron microscopy results did indicate some adhesion between torrefied biomass and polypropylene. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41582.     

Duality in fuzzy linear programming: a survey

The concepts of both duality and fuzzy uncertainty in linear programming have been theoretically analyzed and comprehensively and practically applied in an abundance of cases. Consequently, their joint application is highly appealing for both scholars and practitioners. However, the literature contributions on duality in fuzzy linear programming (FLP) are neither complete nor consistent. For example, there are no consistent concepts of weak duality and strong duality. The contributions of this survey are (1) to provide the first comprehensive overview of literature results on duality in FLP, (2) to analyze these results in terms of research gaps in FLP duality theory, and (3) to show avenues for further research. We systematically analyze duality in fuzzy linear programming along potential fuzzifications of linear programs (fuzzy classes) and along fuzzy order operators. Our results show that research on FLP duality is fragmented along both dimensions; more specifically, duality approaches and related results vary in terms of homogeneity, completeness, consistency with crisp duality, and complexity. Fuzzy linear programming is still far away from a unifying theory as we know it from crisp linear programming. We suggest further research directions, including the suggestion of comprehensive duality theories for specific fuzzy classes while dispensing with restrictive mathematical assumptions, the development of consistent duality theories for specific fuzzy order operators, and the proposition of a unifying fuzzy duality theory.     

Chemical Composition and Physical Properties of High Oleic Safflower Oils (Carthamus tinctorius,Var. CW88-OL and CW99-OL)

Chemical composition and physical properties of CW88‐OL and CW99‐OL cultivars of high oleic safflower seeds and their hexane‐extracted oils were determined. Dry‐based seed composition of CW88‐OL and CW99‐OL was: moisture = 4.29 and 4.23 %, oil = 42.29 and 46.44 %, Crude protein = 20.94 and 16.41 %, neutral detergent fiber = 28.11 and 28.49 %, ash = 1.55 and 2.01 %, phosphorus content = 2033 and 3995 mg/kg, respectively. Major fatty acids in oils were ~78 % oleic (O), ~13 % linoleic (L), ~5 % palmitic (P) and ~2 % stearic (St) acids, for both cultivars. The main triacylglycerols were OOO (~50 %), OOL (~20 %), SOL + OPO (~10 %), and LLP (~5 %). The oil composition of CW88‐OL and CW99‐OL in main minor components was: α‐tocopherol = 582 and 551 mg/kg, total sterols = 3996 and 3362 mg/kg, phospholipids = 22 and 21 mg/kg and wax content = 70 and 74 mg/kg. For both cultivars, density and viscosity of the oils between 25 and 55 °C varied from 903.4 to 912.6 kg/m³ and 63 to 23 mPa.s showing linear and exponential behaviors, respectively. The refractive index was 1.4694. The CIELab color parameters were: 89.69 and 89.53 (L*), ?3.72 and ?3.07 (a*), and 47.28 and 47.78 (b*) (CW88‐OL and CW99‐OL, respectively). Thus, the high oil content of the seeds and nutritional quality of the oil accompanied by low levels of waxes and phospholipids makes the cultivars studied promising for producers and consumers.