A survey of models and algorithms for emergency response logistics in electric distribution systems. Part I: Reliability planning with fault considerations

Emergency response operations in electric distribution systems involve a host of decision-making problems at the reliability and contingency planning levels. Those operations include fault diagnosis, fault location, fault isolation, restoration, and repair. As the first of a two-part survey, this paper reviews optimization models and solution methodologies for reliability planning problems with fault considerations related to electric distribution operations. Contingency planning problems of emergency distribution response are discussed in the second part. The present paper surveys research on determining a distribution substation single-fault capacity, reallocating excess load, configuring distribution systems, partitioning a geographical area into service territories, and locating material stores and depots.     

Behavioral laterality in captive bonobos (Pan paniscus).

Behavioral laterality was studied in a captive group of 11 bonobos (Pan paniscus). In an observational method a significant left lateral bias in carrying and a right lateral bias in leading limb were found. Direction of lateral bias in carrying and leading limb was enhanced when Ss maintained a bipedal posture. Analysis of bimanual feeding behavior revealed a significant right-hand bias for eating when the Ss were holding food with their left hand. In an experimental method a significant shift toward greater right-hand use was found when Ss were required to maintain a bipedal, rather than a quadrupedal, posture. There was no evidence of lateral bias for measures of face touching, self-touching, or gestures. The results are discussed in the context of previous reports of primate laterality. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cross-reactivity of workshop antibodies with cells from domestic and wild ruminants

Reactivities of the monoclonal antibodies (mAbs) from the workshop panel with cells from cattle, sheep, goats, Cape buffalo (Syncerus caffer) and waterbuck (Kobus defassa) were tested. One hundred and sixty-nine mAbs reacted with bovine cells and 111 with sheep cells; 86 were shown to react with goat cells, 71 with buffalo cells and 70 with waterbuck cells. Some mAbs cross-reacted with all five ruminants tested, and are likely to react with epitopes that are conserved in other ruminant species. Such mAbs will obviate the need to produce mAbs panels to leukocyte antigens of other ruminants.     

Structures for Abstract Rewriting

When rewriting is used to generate convergent and complete rewrite systems in order to answer the validity problem for some theories, all the rewriting theories rely on a same set of notions, properties, and methods. Rewriting techniques have been used mainly to answer the validity problem of equational theories, that is, to compute congruences. Recently, however, they have been extended in order to be applied to other algebraic structures such as preorders and orders. In this paper, we investigate an abstract form of rewriting, by following the paradigm of logical-system independency. To achieve this purpose, we provide a few simple conditions (or axioms) under which rewriting (and then the set of classical properties and methods) can be modeled, understood, studied, proven, and generalized. This enables us to extend rewriting techniques to other algebraic structures than congruences and preorders such as congruences closed under monotonicity and modus ponens. We introduce convergent rewrite systems that enable one to describe deduction procedures for their corresponding theory, and we propose a Knuth-Bendix–style completion procedure in this abstract framework.     

Efficient generation of a reshaped human mAb specific for the {alpha} toxin of Clostridium perfringens

We have used the technique of antibody reshaping to producea humanized antibody specific for the a toxin of Clostridiumperfringens. The starting antibody was from a mouse hybridomafrom which variable (V) region nucleo-tide sequences were determined.The complementarity-determining regions (CDRs) from these Vregions were then inserted into human heavy and light chainV region genes with human constant region gene fragments subsequentlyadded. The insertion of CDRs alone into human frameworks didnot produce a functional reshaped antibody and modificationsto the V region framework were required. With minor frameworkmodifications, the affinity of the original murine mAb was restoredand even exceeded. Where affinity was increased, an alteredbinding profile to overlapping peptides was observed. Computermodelling of the reshaped heavy chain V regions suggested thatamino acids adjacent to CDRs can either contribute to, or distort,CDR loop conformation and must be adjusted to achieve high bindingaffinity.     

Direct ceramic inkjet printing of yttria-stabilized zirconia electrolyte layers for anode-supported solid oxide fuel cells

Electromagnetic drop-on-demand direct ceramic inkjet printing (EM/DCIJP) was employed to fabricate dense yttria-stabilized zirconia (YSZ) electrolyte layers on a porous NiO-YSZ anode support from ceramic suspensions. Printing parameters including pressure, nozzle opening time and droplet overlapping were studied in order to optimize the surface quality of the YSZ coating. It was found that moderate overlapping and multiple coatings produce the desired membrane quality. A single fuel cell with a NiO-YSZ/YSZ (∼6 μm)/LSM + YSZ/LSM architecture was successfully prepared. The cell was tested using humidified hydrogen as the fuel and ambient air as the oxidant. The cell provided a power density of 170 mW cm⁻² at 800 °C. Scanning electron microscopy (SEM) revealed a highly coherent dense YSZ electrolyte layer with no open porosity. These results suggest that the EM/DCIJP inkjet printing technique can be successfully implemented to fabricate electrolyte coatings for SOFC thinner than 10 μm and comparable in quality to those fabricated by more conventional ceramic processing methods.     

Judge Nonverbal Communication on Trial: Do Mock Trial Jurors Notice?

This study investigated jurors' reactions to judges' nonverbal communication in mock trials. Participants in 80 mock juries viewed taped segments of direct and cross examination that varied the judges' level of nonverbal involvement. Comments about the judge were solicited in predeliberation questionnaires and unsolicited comments obtained from dialogue that occurred during mock jury deliberations. The investigation found that jurors are aware of nonverbal cues from judges, particularly negative behaviors. Although the high- and low-involved judges solicited roughly the same number of comments, more negative comments were made about the judge displaying low than high nonverbal involvement. The results also revealed that jurors made more negative comments than positive ones. Overall, jurors are most aware of a judge's lack of involvement and apparent bias. Discussion focuses on ways to minimize the influence of judge nonverbal communication on jurors.     

Optimal design of sustainable cellulosic biofuel supply chains: Multiobjective optimization coupled with life cycle assessment and input–output analysis

This article addresses the optimal design and planning of cellulosic ethanol supply chains under economic, environmental, and social objectives. The economic objective is measured by the total annualized cost, the environmental objective is measured by the life cycle greenhouse gas emissions, and the social objective is measured by the number of accrued local jobs. A multiobjective mixed‐integer linear programming (mo‐MILP) model is developed that accounts for major characteristics of cellulosic ethanol supply chains, including supply seasonality and geographical diversity, biomass degradation, feedstock density, diverse conversion pathways and byproducts, infrastructure compatibility, demand distribution, regional economy, and government incentives. Aspen Plus models for biorefineries with different feedstocks and conversion pathways are built to provide detailed techno‐economic and emission analysis results for the mo‐MILP model, which simultaneously predicts the optimal network design, facility location, technology selection, capital investment, production planning, inventory control, and logistics management decisions. The mo‐MILP problem is solved with an ε‐constraint method; and the resulting Pareto‐optimal curves reveal the tradeoff between the economic, environmental, and social dimensions of the sustainable biofuel supply chains. The proposed approach is illustrated through two case studies for the state of Illinois. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Iron(VI) and iron(V) oxidation of thiocyanate

Thiocyanate (SCN-) is used in many industrial processes and is commonly found in industrial and mining waste-waters. The removal of SCN- is required because of its toxic effects. The oxidation of thiocyanate (SCN-) by environmentally friendly oxidants, Fe(VI) and Fe(V), has been studied anaerobically using stopped-flow and premix pulse radiolysis techniques. The stoichiometry with Fe(VI) was determined to be 4HFeO(4-) + SCN(-) + 5H2O-->4Fe(OH)3 + SO4(2-) + CNO(-) + O2 + 2OH-. The rate law for the oxidation of SCN- by Fe(VI) was found to be -d[Fe(VI)]/dt = k11([H+]/([H+] + Ka,HFeO4)) [Fe(VI)][SCN-] where k11 = 2.04 +/- 0.04 x 10(3) M-1 s-1 and pKa,HFeO4 = 7.33. A mechanism is proposed that agrees with the observed reaction stoichiometry and rate law. The rate of oxidation of SCN- by Fe(V) was approximately 3 orders of magnitude faster than Fe(VI). The higher reactivity of Fe(V) with SCN- indicates that oxidations by Fe(VI) may be enhanced in the presence of appropriate one-electron-reducing agents. The results suggest that the effective removal of SCN- can be achieved by Fe(VI) and Fe(V).