Zeolite coated interdigital capacitors as a new type of gas sensor

The adsorption of a gas influences the dielectric constant of zeolites. This property is used as the sensitive component of a gas sensor.

Planar interdigital capacitors were coated with thin films of zeolites. When gas molecules are adsorbed, the dielectric constant of the zeolite is altered, which causes a change in the capacitance of the interdigital capacitor. This change is strongly dependent on the concentration of adsorbate in the gas phase.     

Fuel cycle strategies and plutonium management in Europe

An overview of current nuclear power generation and fuel cycle strategies in Europe is presented, with an emphasis on options for the management of separated plutonium in the medium to long term. Countries which have opted for reprocessing of spent fuel have had to contend with increasing inventories of separated plutonium. Of the various potential options for utilisation or disposition of these stockpiles, only light water reactor (LWR) mixed-oxide (MOX) fuel programmes are sufficiently technologically mature to be fully operational in several European countries at present. Such reprocessing-recycling programmes allow for a stabilisation of the overall separated plutonium stocks, but not for a significant reduction in the stockpile. Moreover, the quality of recycled plutonium decreases at each potential step of re-irradiation. Therefore, optimised or new ways of managing the plutonium stocks in the medium to long term are required. In the present overview we consider the most promising options for reactor utilisation of plutonium in both near-term future reactor and Generation IV systems.     

Energy Metabolites as Biomarkers in Ischemic and Dilated Cardiomyopathy

With more than 25 million people affected, heart failure (HF) is a global threat. As energy production pathways are known to play a pivotal role in HF, we sought here to identify key metabolic changes in ischemic- and non-ischemic HF by using a multi-OMICS approach. Serum metabolites and mRNAseq and epigenetic DNA methylation profiles were analyzed from blood and left ventricular heart biopsy specimens of the same individuals. In total we collected serum from n = 82 patients with Dilated Cardiomyopathy (DCM) and n = 51 controls in the screening stage. We identified several metabolites involved in glycolysis and citric acid cycle to be elevated up to 5.7-fold in DCM (p = 1.7 × 10⁻⁶). Interestingly, cardiac mRNA and epigenetic changes of genes encoding rate-limiting enzymes of these pathways could also be found and validated in our second stage of metabolite assessment in n = 52 DCM, n = 39 ischemic HF and n = 57 controls. In conclusion, we identified a new set of metabolomic biomarkers for HF. We were able to identify underlying biological cascades that potentially represent suitable intervention targets.     

A novel technique for the preparation of secondary fatty amides

A technique for the synthesis of monosubstituted fatty amides at low temperature and ambient pressure was developed. This method involved the condensation of an amine with a triacylglycerol. The primary amine (ethyl,n-butyl,n-hexyl andn-octyl were tested) acted as reagent and solvent for the fatty substrates. No additional organic solvent or catalyst was added. Tallow, vegetable oils and fish oil all served well as substrates, as did pure tripalmitin. The rate of amidation was dependent upon temperature and the ratio of fat to amine. In a series of experiments conducted with tallow andn-butylamine at a fat:amine molar ratio of 1:16, amidation could be carried out at 20°C, producingn-butyltallowamide in 83% yield in 24 hr. When the fat:amine molar ratio was reduced to 1:8, and the temperature raised to 45°C, the amide yield was 87.6% in 24 hr. When the reaction was carried out at the boiling point ofn-butylamine (78°C) and at a fat:amine ratio of 1:8, the amide yield was 93.2% in 4 hr. The reaction progressed more rapidly with higher molecular weight amines. The identity and purity of the amides was assessed by thin-layer chromatography and confirmed by elemental analyses and infrared and C¹³ nuclear magnetic resonance spectroscopy.     

Development and characterization of a biocompatible OH-modified copolymer based on polyurethane

Different polyurethanes were synthesized by varying the diol as well as the diisocyanate components and chain extenders. Polyurethanes with OH-groups were obtained by photo- and thermoinitiation of the radical polymerization of hydroxy alkyl acrylates in the presence of the polyurethanes. The polymers were evaluated with respect to their biocompatibility by measuring the cell spreading, the rates of DNA- and protein synthesis and the swelling behaviour. The differences in the surfaces and the bulks between the selected basic polyurethane and the functionalized modification were determined and characterized by XPS, FTIR-ATR and ¹³C-FT-NMR-spectroscopy. The mechanical data of Tecoflex EG 60D® and Pellethane 2363–80AE® were compared with the data of the synthesized polyurethanes.     

The impedance of the alkaline zinc-mercuric oxide cell. I. Cell behaviour and interpretation of impedance spectra

The impedances of small (2400 mA h) alkaline Zn-HgO cells have been measured in the range 10 kHz-0.001 Hz at various states of charge from fully charged to fully discharged. The behaviour of the cell conforms to that expected for rate control by charge transfer at the zinc electrode and diffusion in solution. At low frequencies there is a relaxation in the diffusive circuit elements which ultimately results in a complete suppression of the capacitative component of the impedance at zero frequency. The low-frequency behaviour is analogous to convective diffusion and is due to the effective distance between the electrodes being small compared with the characteristic length (D/)^1/2. The magnitude of the charge transfer resistance is the best measure of the state of charge.Nomenclature a effective electrode separation - C _DL double-layer capacitance of cell - C _R capacitative component of cell impedance - C concentration difference - D percentage discharge in Equation 12 - D _i diffusion coefficient of speciesi - R ohmic resistance of cell - R _R resistive component of cell Faradaic impedance - Ui constant defined by Equation 10 - Z total cell impedance - Z _F cell Faradaic impedance - Z _F cell impedance modified for porosity effect - Z _x cell impedance of Faradaic component plus double layer - cell Warburg coefficient (slope ofR _R and 1/C _Rversus su}-1/2) - _C Warburg coefficient calculated fromC _r values - _i cell Warburg coefficient for speciesi - Warburg coefficient calculated fromR _R values - dihedral angle of tail of Sluyters plot (after coming-off high-frequency semicircle) - angular frequency     

Inactivation of Staphylococcus hyicus lipase by hexadecylsulfonyl fluoride: evidence for an active site serine

The Staphylococcus hyicus lipase is an acyl hydrolase with broadsubstrate specificity including neutral glycerides and phospholipids.To obtain further insight into the mechanism of action of thisenzyme, we tested several sulfonyl fluorides as active site-directedinhibitors. The enzyme is resistant to the well-known serineprotease/esterase inhibitor phenylmethanesulfonyl fluoride (PMSF),but is rapidly inactivated by hexadecylsulfonyl fluoride. Thekinetics of inactivation were studied in Triton X-100 micelles.Inactivation is fast and the rate of inactivation is constantover the pH range where this lipase is active. Metal ions likeCa²⁺ and Sr²⁺ do not appreciably influence the rate of inactivation,although the enzymatic activity is significantly increased,suggesting a structural role for these ions. The S.hyicus lipasecontains a consensus sequence G-H/Y-S-X-G. Substitution by site-directedmutagenesis of this serine (Ser369) by a cysteine resulted ina mutant with only 0.2% residual activity. The activity of thismutant could not be inhibited with water-soluble sulfhydrylreagents either in the presence or absence of Triton X-100 micelles.In the presence of Triton X-100 micelles, inactivation of themutant occurred with 4-nitrophenylhexadecyl disulfide (t_1/2= 125 min) while the wild-type enzyme does not react at all.We conclude that Ser369 is the active site residue and thatin water this residue is inaccessible. Only after interfacialactivation Ser369 (or Cys369) becomes exposed and reacts withirreversible inhibitors.