A Software Package for Design and Manufacture of Prosthetic Sockets for Transtibial Amputees

A software package, written in Pascal, whkh automates the shape management process associated with fitting prosthetic sockets to transtibial (below-knee) amputees, is described. The system allows an operator to apply global and piecewise transformations, based upon clinkal measurements, to a primitive socket database. These transformations yield a modified socket database which defines the surface shape of a positive socket mold over which an amputee's prosthetic socket is formed. The mold is replicated using a computer numerkally controled milling machine, with the final socket being formed over this mold by a specialized vacuum former. Preliminary clinical trials indkate that this automated approach to shape management yields comfortable prostheses, with savings in time and cost over the traditional methods of prosthesis manufacture.     

Conductive Anodic Filament Formation Part II: Electrochemical Reactions Leading to CAF

Conductive anodic filament (CAF) formation has been studied for a number of years, but the mechanism of its formation has not previously been defined. In 2002, Ready identified CAF as atacamite, Cu₂(OH)₃Cl. Electrochemical studies have shown that both CuCl and CuCl ₂ ^? participate in the formation of Cu₂(OH)₃Cl, with the predominating species being CuCl. This paper proposes a mechanism for CAF formation based on x-ray photoelectron spectroscopy. The data show that CuCl is the precursor to the formation of Cu₂(OH)₃Cl in the presence of oxygen and water. Earlier, Meeker and Lu Valle had proposed that CAF failure is best represented by two competing reactions: the formation of a copper chloride corrosion compound (now identified as Cu₂(OH)₃Cl) and the formation of innocuous trapped chlorine compounds. Since no evidence of any trapped chloride compounds has been found, we propose that the formation of CAF is best represented by a single nonreversible reaction.     

Lipid composition of bovine serum lipoproteins.

The four classes of lipoproteins (one of very low density, two of low density, and one of high density) were isolated from the serum of a lactating Friesian cow. The proportions of protein and of the different lipid classes were determined in each lipoprotein. Triglycerides predominated in the very low density lipoprotein, and cholesteryl esters and phospholipids in the others. The triglycerides of the very low density lipoprotein were richer in oleic acid than were those of the low density lipoproteins, but its cholesteryl esters were relatively poorer in linoleic and linolenic acid than were those of any of the others. Phytanic acid (3, 7, 11, 15-tetramethylhexadecan-1-oic acid) was in all lipoproteins except those of very low density; it was not in cholesteryl esters but was abundant in triglycerides, particularly in those of the low density lipoproteins. Hydrolysis of the triglycerides of very low density lipoprotein with pancreatic lipase showed that 82% of their stearic acid was esterified to the 1- and 3-positions of glycerol and that 64% of their palmitic acid was esterified to the 2-position.     

A 3D unsplit-advection volume tracking algorithm with planarity-preserving interface reconstruction

A new volume tracking method is introduced for tracking interfaces in three-dimensional (3D) geometries partitioned with orthogonal hexahedra. The method approximates interface geometries as piecewise planar, and advects volumes in a single unsplit step using fully multidimensional fluxes that have their definition based in backward-trajectory remapping. By using multidimensional unsplit advection, the expense of high-order interface reconstruction is incurred only once per timestep. Simple departures from strict backward-trajectory remapping remove any need for consideration of volume computations involving shapes consisting of non-planar ruled surfaces. Second-order accuracy of the method is demonstrated even for vigorous 3D deformations.     

Littman光栅外腔可调谐Yb3+双包层光纤激光器

本文对LD泵浦的光栅外腔可调谐双包层Yb3 光纤激光器进行了实验研究．采用Littman外腔结构，研究了Yb3 光纤激光器的调谐特性．输出激光调谐范围42nm，谱线宽度0．08nm，最大输出功率达到了460mW，斜率效率约30％．并对其输出光功率随波长的变化进行了观测和分析．     

Development of a Virtual Reality Structural Analysis System

This paper discusses the development of virtual structural analysis program (VSAP). This is a virtual environment (VE) based structural analysis system developed through a collaborative effort between the School of Architecture + Design and the Department of Computer Science at Virginia Polytechnic Institute and State Univ. (Virginia Tech). The VSAP was developed by linking a visualization routine using the simple VE library and a structural analysis software, the PC-SAP4. Details of the design of four user interfaces for the VSAP are presented. These user interfaces are: the immersive pen and tablet interface, the desktop interface, the portable immersive interface, and the cave automatic VE immersive interface. Usability studies for each interface were conducted. Results of these studies indicated that the users of VSAP were highly satisfied with the experience. In addition, all the developed interfaces were found to be successful for their specific application.     

Tubular membrane cathodes for scalable power generation in microbial fuel cells

One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.     

Application of discrete event simulation for robust system design of a melt facility

This paper presents a methodology to identify robust operating regions through the selection of controllable factory variables, using discrete event simulation. A casting plant melt facility was used as an industrial test bed to develop these techniques. A robust system design was determined by response surface analysis of key production parameters. Furthermore, robust operating policies that maximise throughput, while minimizing work-in-progress and thus energy consumption were identified.     

Developing habitat associations for fishes in Lake Winnipeg by linking large scale bathymetric and substrate data with fish telemetry detections

Understanding relationships between freshwater fishes and habitat is critical for effective fisheries and habitat management. Habitat suitability indices (HSI) are commonly used to describe fish–habitat associations in rivers and other freshwater ecosystems. When applied to large lakes however, standard sampling procedures are inadequate because of larger sampling areas and an increased risk of fish collection bias through one-time observations. Here, we use lake bathymetry, substrate, and multiple fish telemetry detections collected from a systematically deployed receiver grid to develop HSI for four fish species (lake sturgeon, freshwater drum, common carp, and walleye) in Lake Winnipeg. Seasonal variations in habitat use based on water depth and substrate were observed in three of four species. Lake sturgeon remained in shallow locations with predominantly gravel substrate near the mouth of the Winnipeg River regardless of season. Freshwater drum persisted over fine substrate in both summer and winter but had a broader depth range in the summer compared to winter. Common carp shifted from mid-range depths and silt substrate in the summer to shallow depths and gravel substrate in the winter. Walleye showed an unchanging association to fine substrate but expanded from primarily mid-range depths in the summer to include shallower depths in the winter. These findings show how multiple telemetry detections per fish can be combined with hydroacoustic data to provide informative habitat associations for fishes in a large lacustrine ecosystem.