火灾自动报直系统布线与接地“违规”问题综述

通过大量的工程观察 ,在火灾自动报警系统工程的布线与接地这个基础项目中经常存在种种问题 ,指出一些常见错误 ,供有关人员特别是工程监理人员参考 ,并注意在工程施工过程中严格把关。     

催化裂化烟气转硫脱氮和助燃三功能催化剂FP-DSN的工业应用

烟气转硫、脱氮和助燃三功能新型催化剂FP DSN在中国石油天然气股份有限公司锦西石化分公司 1.4Mt/a重油催化裂化装置的工业应用表明 ,此种以La ,Ce ,Sr和Co等元素的氧化物或复合物为活性组分的催化剂 ,在其用量为催化裂化催化剂总藏量的 1%～ 2 %的情况下 ,有较强的脱除烟气中SOx 和NOx 的能力 ,大大减轻了烟气对反应器壁的腐蚀 ,减少了污染气体的排放 ,同时有CO助燃效果 ,装置可不使用其他专门的助燃剂。应用试验时 ,再生器烟气中SOx 的平均脱除率达 72 .85 %,NOx 的平均脱除率达 85 .90 %。该催化剂的使用对催化裂化产品的分布和质量无明显影响。该剂的应用为装置带来了可观的经济效益。     

In Situ Formation of a Novel Nanocomposite Structure Based on MCM-41 and Polyethylene

M41S materials are prepared by in situ assembly of inorganic precursors and organic template and can be viewed as nanocomposites of the siliceous phase and organic surfactant. Calcination of these precursors gives the M41S materials that have been used to prepare novel nanocomposite structures, in which the organic phase inside the nano-sized pores is isolated by the nano-sized inorganic pore walls. The nanocomposite structures can be formed by in situ polymerization of monomers inside the channels. Polymerization of ethylene takes place inside the nano-sized pores, producing the desired nanocomposite structure. The resulting polyethylene was found to be a mixture of crystalline and amorphous phases.     

等离子体氧化nc-Si/SiO_2多层膜的蓝光发射

报道了在等离子体增强化学气相沉积 (PECVD)系统中用交替淀积 a-Si对其进行原位等离子体氧化的方法制备了 a-Si∶H/ Si O2 多层膜。随着 a-Si∶H子层的厚度从 3 .8nm减小到 1 .5 nm,a-Si∶H/ Si O2 多层膜的光吸收边和光致发光 (PL )出现了蓝移。在晶化的 a-Si∶ H/ Si O2 多层膜中不仅观察到室温下的红光带 (80 0nm)的发光峰 ,而且还观察到蓝光发射 (4 2 5 nm) ,结合 Raman,TEM和 PL测试 ,对其原因作了简单的分析     

掺染料激光介质的研究

以PMMA为基质，在助溶剂的作用下掺杂激光染料Rh6G制备出了塑料激光介质样品，采用YAG激光器作为泵浦源测试了塑料激光介质的发射光谱，讨论了其激光发射机理。     

交互电视机顶盒功能与构成剖析

机顶盒是交互式电视中重要的组成部分。目前，世界各大公司都在大力研究和开发机顶盒的新产品。本文阐述了机顶盒在交互式电视中所起的作用，并对机顶盒的结构和工作原理作了详细分析。     

浅谈实验室检验在科研生产中的作用

文章阐述了实验窀检验在科研生产中的作用及发挥作用的巨大潜力。     

HfOxNy的场发射特性

用直流溅射和高温退火相结合的方法制备了HfOxNy薄膜并测试了其场发射性能,发现其具有较低的开启电场、较大的发射电流密度以及很好的发射稳定性.高压"锻炼"对提高HfOxNy场发射性能起着关键作用,这与高压"锻炼"下薄膜内部结构和表面性质的改变有关.对场发射机理的研究表明,HfOxNy的场发射符合经典的FN隧穿理论.     

负离子功能针织物在直接蒸发冷却式空调中的应用

在分析负离子净化空气的原理及环境状况与空气中负离子浓度的关系基础上,应用负离子功能粘胶长丝和涤纶短纤混纺纱针织物作为空调滤材,利用空调出风(冷风)使针织物滤材试样飘动,相互拍击摩擦,使空调出风中的氧气分子和水分发生有效电离,从而产生大量空气负离子。实验结果表明,负离子功能粘胶长丝和涤纶短纤混纺纱针织物都有释放空气负离子的功能;而且在同规格纱线的平针组织、双罗纹组织、蜂巢组织和畦编组织针织物中,畦编组织针织物释放的负离子量最大;空气相对湿度对功能材料释放负离子数量有明显影响,当相对湿度在65%~70%时释放的负离子量趋于最大。     

Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material

A heterogeneous finite element model with randomly distributed inhomogeneities has been developed for the determination of the forming limit diagram (FLD) for thin aluminum sheet material based on the prediction of localized necking. The strength difference between the inhomogeneities and the matrix is ascertained either from the fluctuation of the experimental stress-strain curve or from a micromechanical analysis that uses a representative particle field. By changing the specimen geometry and friction conditions, different stress states (or strain paths) are achieved. A plot of the critical Oyane fracture parameter is used to identify the limit strain state. Also, a plot of equivalent plastic strain rate is used to distinguish the boundary of intense shear bands and hence to identify where to take the measurement point. Both a plane stress model and a three-dimensional (3-D) model are adopted to predict the shear banding phenomenon and hence the FLD. The predicted FLD agrees well with the measurements from a recent round robin experimental FLD involving several independent research laboratories. The Taguchi method is applied to assess how the various parameters involved in the heterogeneous model affect the calculated forming limit strain.