A double-layer current conduction model for high-κ gate dielectric materials with interfacial oxide or silicate layer

The current-voltage (I-V) characteristics of metal-oxide-semiconductor (MOS) structures with hafnium oxide as the gate dielectric film were studied. Sharp shifts from a low-voltage ohmic regime to a tunneling conduction were observed in the high-voltage range. The paper demonstrates that this behavior can be described very well with a double-layer dielectric model. Excellent fittings of the experimental curves were obtained and the related key structural and physical parameters were obtained. The model fitting further suggests the optimal annealing conditions for preparing the hafnium oxide films.     

The analysis of solvation in ionic liquids and organic solvents using the Abraham linear free energy relationship

The contentions made in an earlier paper [J Chem Technol Biotechnol 80 : 133–137 (2005)] that the coefficients of the Abraham solvation equation do not provide meaningful information on the molecular properties of ionic liquid solvents is refuted. The objections noted in the earlier paper disappear when the solvation equation model is correctly applied to the experimental data. It is further shown that the coefficients of the Abraham solvation equations can be used to characterize ionic liquids and can be used to select solvents for the solubility of gaseous solutes. Copyright © 2006 Society of Chemical Industry     

Ecophysiology of ochratoxigenic Aspergillus ochraceus and Penicillium verrucosum isolates. Predictive models for fungal spoilage prevention - a review

Ochratoxin A (OTA) is a secondary metabolite produced by several species of Aspergillus and Penicillium; among them Aspergillus ochraceus and Penicillium verrucosum are two ochratoxigenic species capable of growing in different climates and thus contamination of food crops with OTA can occur worldwide. OTA can be found in a wide range of foods such as cereals, coffee, cocoa, spices, beer, wine, dried vine fruit, grapes and meat products. OTA is toxic to animals, it presents neurotoxic, immunotoxic and nephrotoxic effects. It has been implicated in a human kidney disorder known as Balkan Endemic Nephropathy. This review focuses on the ecophysiology of ochratoxin-producing Aspergillus ochraceus and Penicillium verrucosum, the effect of environmental factors on their germination, mycelial growth, and OTA production. Knowledge of environmental conditions required for sucessive stages of fungal development represent the first step towards preventing mycotoxin formation. Predictive models for different stages of fungal development are presented, which allow prediction of the time before spoilage as a function of the abiotic factors. Finally, the implications of these studies in management of barley, coffee and grapes are described. This can help to identify the critical control points in their production, storage and distribution processes.     

Kinetics of AuSn4 migration in lead-free solders

The relatively fast diffusion of Au atoms in eutectic PbSn matrix is considered one of the contributing factors to the Au embrittlement problem. In this study, we further investigated the Au embrittlement problem in high-Sn solders. Experimentally, Sn3.5Ag (wt.%) spheres with 500-μm diameter were soldered over the Au/Ni soldering pads. It was found that some of the AuSn₄ needles that formed after reflow inside the solder migrated back to the solder/pad interface during thermal aging. However, the migration kinetics in high-Sn solders was slower compared to that in eutectic PbSn. The difference in migration kinetics of AuSn₄ in eutectic PbSn and SnAg was ascribed to the difference in the magnitudes of the Au flux and the Ni flux. In eutectic PbSn, the Au flux was much greater than that of the Ni flux, and the Au and Ni flux were in the same order of magnitude in eutectic SnAg. The relative magnitude of the Au and Ni flux changed in eutectic PbSn and SnAg because the homologous temperatures of PbSn and SnAg were different.     

Functional characteristics of Bi2Sr2Ca2Cu3O10 + δ/ZrN composites

We present the results of investigation of the magnetic, transport, structural, and mechanical properties of composites obtained by introducing finely dispersed zirconium nitride into a matrix of a Bi₂Sr₂Ca₂Cu₃O_{10 + δ} (Bi2223) high-temperature superconductor. It is established that the introduction of ZrN particles in the range of very small concentrations (0.1–0.3 wt %) leads to a significant (more than threefold) increase in the critical current density of Bi2223 and increases the density of the composite, while the microhardness of the superconducting phase remains unchanged.     

Specular reflection of thermal neutrons from Gd-containing layers and optimization of antireflective underlayers for polarizing coatings

A detailed analysis of specular neutron reflection from an absorbing medium is given. The experimental studies revealed that oxidation and roughness of the surface are the main factors that determine the neutron reflectivity of Gd-containing layers. It is concluded that the empirical approach used at present does not guarantee optimization of underlayer parameters (composition and thickness) and technological regimes. An algorithm of optimization is proposed, in which account is taken of the substrate potential, the dependence of the underlayer potential on the thermal neutron wavelength, the polarizing coating imperfections that enhance reflection of neutrons with the undesired spin. The antireflective TiZrGd underlayer for CoFe/TiZr supermirrors produced at the magnetron facility DIOGEN (PNPI, Gatchina) is optimized.     

Mössbauer study of the Ge two-electron donor centers in PbSe

Mössbauer emission spectroscopy at ⁷³As(⁷³Ge) is used to show that the charge state of the ⁷³Ge antisite defect formed in the anion sublattice after the radioactive transformation of ⁷³As is independent of the position of the Fermi level. In contrast, the ⁷³Ge center in the cation sublattice of PbSe is an electrically active substitutional impurity. For the n-type samples, the spectrum corresponds to the neutral state of the donor center (⁷³Ge²⁺), and for the p-type samples, the spectrum corresponds to the doubly ionized state (⁷³Ge⁴⁺) of this center.     

Floc size distribution in a stirred suspension.

This paper focuses on the distribution of alumino-humic flocs found in a stirred suspension. Distributions were scaled using the transformation u = d/dL in which d is floc diameter and dL its arithmetic mean value and fitted by a gamma distribution. Flocs were treated as monofractal with solids mass concentration specified by C = A'rhos (d/do)D-3 in which A' is a packing coefficient, rhos the density of the floc solids, D the fractal dimension and do a reference size. It was shown that the overall solids concentration (M) complies with the dependence M proportional to NA'dDL-S(D) in which N is the number of flocs per unit volume and S(D) a distribution moment. Initial estimates of A' and D were obtained from analysis of floc sedimentation behaviour. From knowledge of the base parameters, the calculated value of M did not match the measured M and varied with shear. This was attributed to a kinematic influence on C over and beyond changes associated with the response of dL to shear. Issues of self-similarity were examined and it was concluded that distributions did not display strict self-similarity. Data are provided on the size distribution found in the flocculators of a treatment works at full scale.     

Hydrogen-driven denitrification of wastewater in an anaerobic submerged membrane bioreactor: potential for water reuse.

An anaerobic submerged membrane bioreactor was coupled with a novel hydrogen delivery system for hydrogenotrophic denitrification of municipal final effluent containing nitrate. The biological treatment unit and hydrogen delivery unit were proven successful in removing nitrate and delivering hydrogen, respectively. Complete hydrogen transfer resulted in reducing nitrate below detectable levels at a loading of 0.14 kg Nm(-3) d(-1). The produced water met all drinking water guidelines except for color and organic carbon. However, the organic carbon was removed by 72% mostly by membrane rejection. To reduce the organic carbon and color of the effluent, post treatment of the produced water is required.