A Novel Way To Radiolabel Human Butyrylcholinesterase for Positron Emission Tomography through Irreversible Transfer of the Radiolabeled Moiety

The enzyme butyrylcholinesterase (BChE) is known to be involved in the detoxification of xenobiotics in blood plasma and is associated with the progress of neurodegenerative disorders, diabetes type 2, obesity, and diseases of the cardiovascular system. In the present study, we developed carbamate‐based inhibitors serving as positron emission tomography (PET) radiotracers with ¹⁸F and ¹¹C as radioisotopes to visualize BChE distribution. These inhibitors are radiolabeled at the carbamate site and transfer this moiety onto BChE, which thus results in covalent and permanent radiolabeling of the enzyme. There are no comparable radiotracers for cholinesterases described to date. By ex vivo autoradiography experiments on mice brain slices and kinetic investigations, selective and covalent transfer of the radiolabeled carbamate moiety onto BChE was proven. These tracers might provide high resolution of BChE distribution in vivo to enable investigations into the pathophysiological mechanisms of diseases associated with alterations in BChE occurrence.     

The influence of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082

Samples with one through three passes with 100% overlap were created using friction stir processing (FSP) in order to locally modify the microstructural and mechanical properties of 6082-T6 Aluminum Alloy. A constant rotational speed and three different traverse speeds were used for processing. In this article, the microstructural properties in terms of grain structure and second phase particles distribution, and also the mechanical properties in terms of hardness and tensile strength of the processed zone were addressed with respect to the number of passes and traverse speeds. The parameter combination which resulted in highest ultimate tensile strength was further compared with additional two rotation speeds. FSP caused dynamic recrystallization of the stir zone leading to equiaxed grains with high angle grain boundaries which increased with increasing the number of passes. The accumulated heat accompanying multiple passes resulted in increase in the grain size, dissolution of precipitates and fragmentation of second phase particles. Increasing the traverse speed on the other hand did not affect the grain size, yet reduced the particles size as well as increased the particle area fraction. Hardness and tensile test results of the stir zone were in good agreement where increasing the number of passes caused softening and reduction of the ultimate tensile strength, whereas, increasing the traverse speed increased the strength and hardness. Increasing the tool rotational speed did not have a significant influence on particle mean diameter, ultimate tensile strength and hardness values of the stir zone, whereas, it caused an increase in mean grain size as well as particle area fraction.     

Numerical simulation of biodiesel fuel combustion and emission characteristics in a direct injection diesel engine

The effect of the physical and chemical properties of biodiesel fuels on the combustion process and pollutants formation in Direct Injection (DI) engine are investigated numerically by using multi-dimensional Computational Fluid Dynamics (CFD) simulation. In the current study, methyl butanoate (MB) and n-heptane are used as the surrogates for the biodiesel fuel and the conventional diesel fuel. Detailed kinetic chemical mechanisms for MB and n-heptane are implemented to simulate the combustion process. It is shown that the differences in the chemical properties between the biodiesel fuel and the diesel fuel affect the whole combustion process more significantly than the differences in the physical properties. While the variations of both the chemical and the physical properties between the biodiesel and diesel fuel influence the soot formation at the equivalent level, the variations in the chemical properties play a crucial role in the NO_x emissions formation.     

Polyamide-based composite membranes: Part 2. Interaction, crystallization and morphology

In this work, the interaction, crystallization and morphology of membranes derived from polyamides/poly (vinylalcohol) (PA/PVA, PA: PA66, PA69, PA610 and PA612) blend materials are studied at various weight fractions and various crystallization temperatures. The experimental work includes differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), polarized optical microscopy (POM) and scanning clectron microscopy (SEM). The equilibrium melting temperatures of polyamides in the blends are obtained using Hoffman-Weeks plots, and the interaction parameters are calculated using the Nishi-Wang equation, which is based on the Flory-Huggins theory. The values of the Flory-Huggins interaction parameters χ₁₂ are negative. Significant upward shifts of ν_NH are observed with increasing volume fraction of PVA. The morphology of membranes is impressively complex, diverse, and irregular. All compositions that show nodular morphology are in the μm-scale and the size of the nodules increases with increasing PA6 content. Large void cavities are observed in the substructure for the lower polymer concentrations.     

Modeling the depleting mechanism of urea‐water‐solution droplet for automotive selective catalytic reduction systems

The current work aims to develop a reliable theoretical model capable of simulating the depletion process of urea‐water‐solution (UWS) droplets injected in a hot exhaust stream as experienced in an automotive urea‐based selective catalytic reduction system. A modified multicomponent vaporization model is presented and implemented in the current study to simulate the behavior of UWS droplet in heated environment. Although water depletion is modeled as a vaporization process, urea depletion is modeled using two different approaches: (i) vaporization and (ii) direct thermal decomposition. The suitability of both depletion approaches is assessed in the current study by comparison with experimental data of the decay of a single UWS droplet in a quiescent heated environment. The decay rate of UWS droplet is accurately predicted with the multicomponent vaporization model. The possibility of internal gasification is demonstrated. Based on the complex decomposition behavior of urea, the current study proposes a decomposition mechanism for UWS droplet. The suitability of implementing the rapid mixing approach is assessed through comparison with the diffusion limit approach at various operating conditions and initial UWS droplet sizes. © 2011 American Institute of Chemical Engineers AIChE J, 2011     

Class I/Class IIa bacteriocin cross-resistance phenomenon in Listeria monocytogenes

Variants resistant to nisin A (vA), nisin Z (vZ), pediocin PA-1 (vP), divergicin M35 (vD) and to bacteriocin-like compounds produced by Bifidobacterium thermophilum subsp. infantis RBL67 (vB) were developed from Listeria monocytogenes LSD530. Lactic acid production, specific growth rate, potassium ion efflux, susceptibility to 13 antibiotics, cell-envelope fatty acid composition and bacteriocin cross-resistance were evaluated. Lactic acid production decreased to 75% or less of that by strain LSD530 for vP, vD and vB and to 20% or less for vA and vZ. Specific growth rates also decreased for all five variants. Acquired resistance to nisin A or Z increased resistance to pediocin and divergicin while vD showed increased resistance to nisin Z but decreased resistance to nisin A and vP exhibited increased resistance to nisin Z, pediocin and divergicin but decreased resistance to nisin A. Acquired bacteriocin resistance generally decreased antibiotic sensitivity, particularly to ampicillin, chloramphenicol, erythromycin and tetracycline. Palmitic acid (C(16:0)) in the cell wall fraction of all variants was significantly higher than in strain LSD530, accounting for 18%, 43%, 32%, 26%, 53% and 44% of the total fatty acids for LSD530, vP, vD, vB, vA, and vZ, respectively. The relationship between the acquisition of bacteriocin resistance, cross-resistance and pathogenicity of Listeria monocytogenes should be studied.     

Recent advances in whey processing and valorisation: Technological and environmental perspectives

Whey has several environmental risks if disposed of as waste in watercourses. However, there are numerous valorisation techniques to convert it into valuable and highly nutritious products. Techniques such as membrane filtration may be utilised, but these are not applicable to all categories of whey. Novel methodologies that are agile enough to deal with whey variability can produce valorised products. This review assesses the capability of whey processing techniques, applications and methodologies, discussing pertinent research that can innovate product development further. It focuses on environmental impacts of whey as a waste and ways of minimising it.     

Real-time path planning for autonomous vehicle based on teaching–learning-based optimization

Intelligent Service Robotics - This paper presents an online path planning approach for an autonomous tracked vehicle in a cluttered environment based on teaching–learning-based optimization...     

A comparative study on treatment of wastewaters with various biodegradability and various pH values using single‐chamber microbial fuel cells

This work assessed the performance of a single‐chamber microbial fuel cell (MFC) with various substrates. Primary settled domestic wastewaters were used to simulate wastewaters of high biodegradability; while phenol‐based wastewaters and benzene‐based wastewaters were used to simulate wastewaters of low biodegradability. Experiments were performed at initial pH values of 6, 7 and 8. The maximum voltage production, power density and removal of substrate were obtained using primary settled domestic wastewater, whereas the lowest values were obtained using phenol‐based wastewater. The maximum chemical oxygen demand removal efficiency, phenol removal efficiency and benzene removal efficiency were 80.8, 63.3 and 77.8%, respectively. The performance of the MFC was enhanced by increasing the influent pH. The lowest coulombic efficiencies were obtained from phenol‐based wastewater and benzene‐based wastewater, which indicated that electrogenic bacteria were not the primary microorganisms responsible for the biodegradation of low biodegradable wastewater.