A method for dynamic measurement of the resistance to dry heat exchange by footwear

Five different types of cold protective footwear have been tested with regard to their resistance to dry heat loss (i.e. the insulation) with a new electrically heated foot model. The model is able to simulate 'walking' movements in order to provide a more realistic simulation of wear conditions. Thermal insulation of shoes with and without a steel toe cap was the same. The insulating properties during simulated walking movements were 10-25% lower compared with static conditions. For two of the shoe models a significantly lower insulation value for the sole area was obtained when adding a weight of 30 kg. A significant difference could also be found between the insulation values of two different sizes of one of the models. Measurements with the standard method (EN 344) correlated well with the local insulation value of the sole part of the thermal foot. Correlation with the insulation value for the whole shoe was much less, variation was bigger and ranking in terms of cold protection differed between methods. The electrically heated foot model appears to provide a reproducible, accurate and more realistic method for measuring the insulation properties of shoes than EN 344.     

Societal Safety: Concept,Borders and Dilemmas

In most industrialized countries, the end of the Cold War marked a change in focus from preparedness for war to an increasing focus on civil society's own vulnerability and safety. To meet new threats and changing risks, there is also a need for new analytical concepts. Societal safety is a concept developed in Norway during the last decade. It could be defined as: ‘The society's ability to maintain critical social functions, to protect the life and health of the citizens and to meet the citizens' basic requirements in a variety of stress situations’. It aims to be a systematic approach for understanding, mitigating and responding to social problems such as extraordinary stresses and losses, interferences in complex and mutual dependent systems, or lack of trust in vital social institutions. Future threats to society are not limited to specific sectors or areas, but stem from complex interactions amongst economic, technological, social and cultural factors. Thus, the main challenges to improve societal safety will be the ability to coordinate, organize and assign clear roles to different actors at the international, national and local levels. Societal safety has interfaces with other safety‐related areas such as national security, sustainable development, human security and incident management (handling of isolated accidents, common illness and ordinary criminal acts). Societal safety is, however, a sensitive political issue containing dilemmas and value choices that are hardly possible to perceive or solve as pure scientific problems.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Primary prevention of malignant melanoma in the Stockholm Cancer Prevention Programme

The relation between intracoronary thrombus and endothelin-1 (ET-1) was studied. In a canine model, acute myocardial infarction (MI) was induced by coronary occlusive thrombus produced at a mock atheromatous plaque. Blood samples were collected from the aorta (A) and coronary vein (V). Twenty-eight open-chest dogs divided into three groups were studied. Group I (n = 15): acute MI was induced by coronary occlusive thrombus, and thrombolysis was obtained by urokinase two hours after MI. Group II (n = 8): nonocclusive thrombus was produced without inducing MI. Group III (n = 5): coronary artery was ligated for two hours and reperfused by release of ligation. In Group I, ET-1 was significantly increased after MI in A and V, and ET-1 in V was significantly more elevated than in A during thrombolysis, suggesting ET-1 production in the coronary vessels by thrombolysis. In Group II, ET-1 increased slightly during thrombus formation, but there was no difference in A and V. In Group III, ET-1 was elevated significantly after MI without A and V difference. These results indicate that there is no detectable ET-1 production with coronary thrombus formation, whereas coronary ET-1 production is detected during thrombolysis, most probably because resolved thrombus releases a more potent stimulus to ET-1 production.     

Identification of domains involved in superantigenicity of streptococcal pyrogenic exotoxin F (SpeF)

Coronary artery angioplasty or bypass is being performed for increasing numbers of patients in their seventh, eighth, ninth and even tenth decades of life. Because of the cost involved, justification for performing these procedures in the elderly has become a topic of daily discussion among those responsible for funding healthcare. Both silent and overt coronary artery disease (CAD) are more common in the population over 65 years of age. Because CAD in the elderly often presents in an atypical manner, diagnosis of the disease is frequently delayed. Partly because of the delayed diagnosis and partly because of cost considerations, coronary arterial bypass (CABG) is more often performed as an emergency procedure in the elderly with the results that both operative mortality and costs are increased over those observed in a younger population. Nevertheless, it is clear that performance of coronary revascularization procedures in the elderly can both prolong life and improve the quality of life beyond what can be achieved using alternative methods of treatment. Greater efforts directed toward detection of ischemic heart disease in the these patients and earlier, elective surgery could significantly reduce both the mortality and disability associated with CAD in the elderly.     

An Operator-integration-factor splitting method for time-dependent problems: Application to incompressible fluid flow

In this paper we present a simple, general methodology for the generation of high-order operator decomposition (splitting) techniques for the solution of time-dependent problems arising in ordinary and partial differential equations. The new approach exploits operator integration factors to reduce multiple-operator equations to an associated series of single-operator initial-value subproblems. Two illustrations of the procedure are presented: the first, a second-order method in time applied to velocity-pressure decoupling in the incompressible Stokes problem; the second, a third-order method in time applied to convection-Stokes decoupling in the incompressible Navier-Stokes equations. Critical open questions are briefly described.     

Mechanical properties of moist agglomerates in relation to granulation mechanisms part I. Deformability of moist,densified agglomerates

The mechanical properties of moist samples of fine, polydisperse powders are investigated by measuring the tensile strength by a diametrical compression test and the stress—strain relationship of samples exposed to uniaxial compression. The strengths determined by the two methods correlate well. The strength of moist samples compressed to porosities comparable to the level of intragranular porosities achieved by granulation in high-speed mixers is shown to be influenced significantly by particle interactions in addition to mobile liquid bondings. For a particular material the strength is controlled mainly by porosity and liquid saturation. It is shown that the effect of a growing liquid saturation is to reduce particle interactions and thus to facilitate densification during granulation. The deformability of moist samples, which is dependent on strength and deformation behaviour, is assessed for lactose and dicalcium phosphate.     

Feature selection via sensitivity analysis of SVM probabilistic outputs

Feature selection is an important aspect of solving data-mining and machine-learning problems. This paper proposes a feature-selection method for the Support Vector Machine (SVM) learning. Like most feature-selection methods, the proposed method ranks all features in decreasing order of importance so that more relevant features can be identified. It uses a novel criterion based on the probabilistic outputs of SVM. This criterion, termed Feature-based Sensitivity of Posterior Probabilities (FSPP), evaluates the importance of a specific feature by computing the aggregate value, over the feature space, of the absolute difference of the probabilistic outputs of SVM with and without the feature. The exact form of this criterion is not easily computable and approximation is needed. Four approximations, FSPP1-FSPP4, are proposed for this purpose. The first two approximations evaluate the criterion by randomly permuting the values of the feature among samples of the training data. They differ in their choices of the mapping function from standard SVM output to its probabilistic output: FSPP1 uses a simple threshold function while FSPP2 uses a sigmoid function. The second two directly approximate the criterion but differ in the smoothness assumptions of criterion with respect to the features. The performance of these approximations, used in an overall feature-selection scheme, is then evaluated on various artificial problems and real-world problems, including datasets from the recent Neural Information Processing Systems (NIPS) feature selection competition. FSPP1-3 show good performance consistently with FSPP2 being the best overall by a slight margin. The performance of FSPP2 is competitive with some of the best performing feature-selection methods in the literature on the datasets that we have tested. Its associated computations are modest and hence it is suitable as a feature-selection method for SVM applications. Editor: Risto Miikkulainen.     

Slips and falls in a cold climate: underfoot surface, footwear design and worker preferences for preventive measures

Slips and falls and associated outdoor injuries are prevalent in cold climates. The objectives of this field investigation were to describe the consequences of slips and falls on ice and snow and the associated injuries, to assess the risks of various icy and snowy surfaces, to identify design needs of footwear, and to ascertain preventive measure preferences of outdoor workers. The organizations investigated were a newspaper delivery service, a military regiment, mining and construction industries. The results showed that fall events occur most frequently on ice covered with snow. This is due to the difficulty of perceiving hidden risks in order to adjust gait strategies. The professional footwear provided does not provide enough protection against slips and falls. Slip resistant properties are ranked as one of the top requirements by the users. Their most preferred preventive measures are footwear with anti-slip properties and the application of anti-slip materials, such as sand or salt.