Topography characterization of a deep grating using near-field imaging

Using near-field optical microscopy at the wavelength of 633 nm, we image light intensity distributions at several distances above an approximately 2-microm-deep and a 1-microm-period glass grating illuminated from below under the condition of total internal reflection. The intensity distributions are numerically modeled, and an inversion procedure based on a least-squares-fit optimization is employed to extract the grating geometry from the optical images.     

Profiles of a high-aspect-ratio grating determined by spectroscopic scatterometry and atomic-force microscopy

The new and fast scatterometry method called optical diffraction microscopy is compared with atomic-force microscopy by use of cross-section scanning-electron microscope images as references. The sample is a high-aspect-ratio grating with a period of approximately 1000 nm. To allow the atomic-force microscope to track all parts of the grating profile, the grating is investigated at different tilt angles. The measured quantities of the profile include sidewall angle gamma (approximately 90 degrees), groove height h (approximately 2000 nm), and degree of filling f (approximately 40%). The two methods, which respond to quite different material properties, give consistent results within standard uncertainties of u(gamma)相似文献   

Phenomenology of Abnormal Grain Growth in Systems with Nonuniform Grain Boundary Mobility

We have investigated the potential for nonuniform grain boundary mobility to act as a persistence mechanism for abnormal grain growth (AGG) using Monte Carlo Potts model simulations. The model system consists of a single initially large candidate grain embedded in a matrix of equiaxed grains, corresponding to the abnormal growth regime before impingement occurs. We assign a mobility advantage to grain boundaries between the candidate grain and a randomly selected subset of the matrix grains. We observe AGG in systems with physically reasonable fractions of fast boundaries; the probability of abnormal growth increases as the density of fast boundaries increases. This abnormal growth occurs by a series of fast, localized growth events that counteract the tendency of abnormally large grains to grow more slowly than the surrounding matrix grains. Resulting abnormal grains are morphologically similar to experimentally observed abnormal grains.     

Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges

Summary The classical solution of the steady-state creep problem for a pressurized thick-walled cylinder is based on the power law constitutive equation. Several heat resistant steels show, however, the linear dependence of the creep rate on the applied stress within a certain stress range. In this paper we apply an extended constitutive equation which includes both the linear and the power law stress dependencies. The material constants are identified for the 9Cr1MoVNb steel at 600 °C. We recall the boundary value problem of steady-state creep for the thick cylinder under the plane strain condition. We present an approximate solution illustrating the stress redistributions as a result of the creep process. The analysis shows that for the certain range of the internal pressure both the linear and the power law creep must be taken into account. In this case the results according to the extended constitutive model essentially differ from the classical ones. The obtained solution is also applied to verify the developed user-defined creep material subroutine inside a commercial finite element code. Dedicated to Professor Franz Ziegler on the occasion of his 70th birthday     

Genome-wide association study using high-density single nucleotide polymorphism arrays and whole-genome sequences for clinical mastitis traits in dairy cattle

Mastitis is a mammary disease that frequently affects dairy cattle. Despite considerable research on the development of effective prevention and treatment strategies, mastitis continues to be a significant issue in bovine veterinary medicine. To identify major genes that affect mastitis in dairy cattle, 6 chromosomal regions on Bos taurus autosome (BTA) 6, 13, 16, 19, and 20 were selected from a genome scan for 9 mastitis phenotypes using imputed high-density single nucleotide polymorphism arrays. Association analyses using sequence-level variants for the 6 targeted regions were carried out to map causal variants using whole-genome sequence data from 3 breeds. The quantitative trait loci (QTL) discovery population comprised 4,992 progeny-tested Holstein bulls, and QTL were confirmed in 4,442 Nordic Red and 1,126 Jersey cattle. The targeted regions were imputed to the sequence level. The highest association signal for clinical mastitis was observed on BTA 6 at 88.97 Mb in Holstein cattle and was confirmed in Nordic Red cattle. The peak association region on BTA 6 contained 2 genes: vitamin D-binding protein precursor (GC) and neuropeptide FF receptor 2 (NPFFR2), which, based on known biological functions, are good candidates for affecting mastitis. However, strong linkage disequilibrium in this region prevented conclusive determination of the causal gene. A different QTL on BTA 6 located at 88.32 Mb in Holstein cattle affected mastitis. In addition, QTL on BTA 13 and 19 were confirmed to segregate in Nordic Red cattle and QTL on BTA 16 and 20 were confirmed in Jersey cattle. Although several candidate genes were identified in these targeted regions, it was not possible to identify a gene or polymorphism as the causal factor for any of these regions.     

Anatomical and histological changes in the oviducts of Japanese quail, Coturnix japonica, after embryonic exposure to ethynyloestradiol

Oestrogen is needed for normal oviductal development in female birds, but excessive early exposure to oestrogen can cause oviductal abnormalities and impair egg-laying ability. In this study, the anatomical and histological effects of in ovo exposure to the synthetic oestrogen ethynyloestradiol on the oviducts of immature and adult female Japanese quail, Coturnix japonica, were investigated. A series of abnormalities was observed after injection of ethynyloestradiol (2 or 20 ng g(-1) egg) into the yolk on day 3 of incubation. Ethynyloestradiol induced precocious differentiation of the luminal epithelium and tubular glands in immature chicks. Right-side oviduct retention occurred at all the ages studied, whereas certain other effects were not evident until sexual maturity. The left oviduct was reduced in size and tubular gland density in the uterus (shell gland) was reduced in sexually mature birds that had been treated with ethynyloestradiol. The utero-vaginal junction was longer than in control birds and had a higher tubular gland density. The epithelial cells in the magnum were taller in birds treated with ethynyloestradiol. Embryonic exposure to the environmental contaminant ethynyloestradiol may cause persisting structural malformations in oviducts of quails, which can impair fertility. As oviductal malformations are indicative of embryonic exposure to exogenous oestrogen, they are potentially useful as biomarkers of xenooestrogen exposure in wild bird populations.     

Improving particle size distribution and flow properties of milk chocolate produced by ball mill and blending

Chocolate mass is produced by roller refining and conching or alternatively by ball milling. Grinding can generate varying particle size distributions (PSD), which again influence flow parameters. The latter are very important for downstream processing as well as mouthfeel and consumer acceptance of the final product. The objective of the work was to influence and control PSD and flow properties of ball mill chocolate. Various milk chocolate samples were produced in laboratory and pilot scale, and their PSD and flow properties were measured. First, it was tried to pre-grind milk and cocoa particles to very small size and then to produce coarser sugar particles in order to achieve a bimodal PSD. This should increase package density, which makes more fat available for the flow process. The attempt did not work very well for various practical reasons. Secondly, when instead fine and coarse fractions of the same particle composition were blended, it was possible to achieve bimodal PSDs as they are known from roller-refined products. The lowest values for flow parameters were achieved with a mix of 63 % coarse and 37 % fine particles as predicted in the literature. Thirdly, it was tested to blend roller-refined and ball-milled samples. It was possible to use one-third of the latter without considerably changing flow properties. This opens up various practical possibilities for the industry, e.g. line extension and productivity increase with relatively little effort and investment.     

Bacterial Community of Koumiss from Mongolia Investigated by Culture and Culture-Independent Methods

The bacterial community of fermented horse milk (koumiss) from Mongolia was studied using three methods: cultivation, direct identification by 16S rRNA clone library and denaturing gradient gel electrophoresis (DGGE). Ninety-eight strains were isolated by traditional cultivation and 61 of those were randomly selected for further identification by 16S rRNA gene sequencing. The strains were dominated by lactic acid bacteria (LAB; six different lactobacilli), Acinetobacter, Bacillus and Psychrobacter. Construction of the clone library analysis revealed that 16S sequences of 220 clones, genus Lactobacillus was dominant, but Streptococcus thermophilus, Acetobacter pasteurianus and uncultured clones were also detected. Ten unique bands were sequenced from the DGGE and revealed: Lactococcus lactis, Lactococcus lactis subsp. lactis, Clostridium acidurici, Acinetobacter johnsonii, Dickeya sp., Enterobacter sp., Pseudomonas sp., Raoultella sp., and Ruminococcus sp.. In vitro growth inhibition of three human pathogens, Escherichia coli, Enterobacter sakazakii and Staphylococcus aureus by 14 culturable bacteria displayed that only three of the isolates tested inhibit growth of E. sakazakii while most of the other bacteria delayed growth of the target bacteria.     

Single Charging of Nanoparticles by UV Photoionization at High Flow Rates

The feasibility of UV photoionization for single unipolar charging of nanoparticles at flow rates up to 100 l· min ^?1 is demonstrated. The charging level of the aerosol particles can be varied by adjusting the intensity of the UV radiation. The suitability of a UV photocharger followed by a DMA to deliver monodisperse nanoparticles at high aerosol flow rates has been assessed experimentally in comparison to a radioactive bipolar charger ( ⁸⁵ Kr, 10 mCi). Monodisperse aerosols with particle sizes in the range of 5 to 25 nm and number concentrations between 10 ⁴ and 10 ⁵ cm ^?3 have been obtained at flow rates up to 100 l· min ^?1 with the two aerosol chargers. In terms of output particle concentration, the UV photoionizer performs better than the radioactive ionizer with increasing aerosol flow rate. Aerosol charging in the UV photoionizer is described by means of a photoelectric charging model that relies on an empirical parameter and of a diffusion charging model based on the Fuchs theory. The UV photocharger behaved as a quasi-unipolar charger for polydisperse aerosols with particles sizes less than 30 nm and number concentrations ～10 ⁷ cm ^?3 . Much reduced diffusion charging was observed in the experiments, with respect to the calculations, likely due to ion losses onto the walls caused by unsteady electric fields in the irradiation region.